24 Of Best Analog Multiplexers In 2024
TOP 1
1 Piece CD4052BE CD4052 Differential 4-Channel Analog Multiplexer/Demultiplexer Logic-Level Conversion
TeufelTronics(TM)
CD4052BE-TEXAS INSTRUMENTS
0.25 x 0.25 x 0.23 inches
0.01 pounds
Our Score
Product Features
On-chip decoding of binary addresses
Signal Levels In A Wide Range Of Digital And Analog Formats - Digital. From 3 volts to 20 volts Analog. 20Vp-
At 18V, the maximum input current is 1A over the entire package temperature range, and at 25C, the maximum input current is 100Na.
Characteristics of Matched Switches, Ron = 5 (Typ) For Vddvee = 15V
Break- Before- Channel Overlap is eliminated when you switch channels.
TOP 2
JUSTQIAOHONG 74HC4051 8 Channel Analog Multiplexer Module Sensor Board
JUSTQIAOHONG
Our Score
Product Features
A Digital Enable Input (E) and a Common Input/Output (Z) are both available. The Switches Are On When E Is High
Three digital select inputs (S0, S1, and S2), eight independent inputs/outputs (Yn), and an A/D converter
The light has been switched off. Clamp Diodes are a source of input. This Allows Current Limiting Resistors To Be Used.
To connect inputs to voltages higher than Vcc.
Features:
TOP 3
High Speed Analog Multiplexer, High Speed Analog Multiplexer Low On-Resistance Analog Demultiplexer CD74HC4067
Jopwkuin
Our Score
Product Features
You can use the multiplexer to transfer Ttl-based signals because it can also process digital signals. Using a pipe, send serial data to multiple devices or receive data from multiple devices at the same time.
It will completely disconnect the common pins (all switches will be disconnected) if you drive it to a high level.
This Cd74Hc4067 Analog/Digital Multiplexer/Demultiplexer Has 16 Channels And Is Extremely Convenient.
The internal switch is bidirectional, with low on resistance and off leakage, so please turn it off first and then on to avoid talking.
It can be used with both digital and analog signals (the voltage must not exceed Vcc), and it can be connected in either direction. To control this, connect the chip's four digital outputs to the chip's address selection pin (So- S3) And give it the binary address of the channel you want to use.
TOP 4
NXP 74HC4052N 74HC4052 - Dual 4-channel analog multiplexer/demultiplexer DIP16 1 Pack
NXP
74HC4052N 74HC4052 DIP16
3.00 x 2.00 x 0.25 inches
Our Score
Product Features
Translation at the Logic Level: To Allow 5 V Logic To Work With 5 V Analog Signals
A wide range of analog input voltages is available, ranging from - to +. From 5 V to 5 V
Break Before Making' is a built-in feature.
Demultiplexing And Multiplexing In The Digital World
Demultiplexing And Multiplexing Of Analog Signals
TOP 5
Analog Demultiplexer, High Speed Analog Multiplexer Analog Multiplexer Two-Way Connection
SALUTUY
Our Score
Product Features
The internal switch is bidirectional, with low on resistance and off leakage, so please turn it off first and then on to avoid talking.
It will completely disconnect the common pins (all switches will be disconnected) if you drive it to a high level.
This Cd74Hc4067 Analog/Digital Multiplexer/Demultiplexer Has 16 Channels And Is Extremely Convenient.
It can be used with both digital and analog signals (the voltage must not exceed Vcc), and it can be connected in either direction. To control this, connect the chip's four digital outputs to the chip's address selection pin (So- S3) And give it the binary address of the channel you want to use.
You can use the multiplexer to transfer Ttl-based signals because it can also process digital signals. Using a pipe, send serial data to multiple devices or receive data from multiple devices at the same time.
TOP 6
Analog Demultiplexer, CD74HC4067 High Speed Analog Multiplexer Two-Way Connection Analog Multiplexer High Speed
Binyalir
Our Score
Product Features
The internal switch is bidirectional, with low on resistance and off leakage, so please turn it off first and then on to avoid talking.
It can be used with both digital and analog signals (the voltage must not exceed Vcc), and it can be connected in either direction. To control this, connect the chip's four digital outputs to the chip's address selection pin (So- S3) And give it the binary address of the channel you want to use.
This Cd74Hc4067 Analog/Digital Multiplexer/Demultiplexer Has 16 Channels And Is Extremely Convenient.
It will completely disconnect the common pins (all switches will be disconnected) if you drive it to a high level.
You can use the multiplexer to transfer Ttl-based signals because it can also process digital signals. Using a pipe, send serial data to multiple devices or receive data from multiple devices at the same time.
TOP 7
100PCS CD4053 CD4053B CD4053BE DIP-16 Analog Multiplexer IC
CozParts
Our Score
Product Features
Cd4053 Cd4053B Cd4053Be Dip- 100 pcs Ic Ic Ic Ic Ic Ic Ic Ic Ic Ic Ic I
TOP 8
Texas Instruments CD4051BE Semiconductor
Texas Instruments
CD4051BE
0.44 pounds
Our Score
Product Features
Putting it on the wall Hole in the Wall
Type of Product - Analog Switch Multiplexer is a device that allows you to combine two or more analog
Count of Pins -
TOP 9
20PCS CD4053 CD4053B CD4053BE DIP-16 Analog Multiplexer IC
CozParts
Our Score
Product Features
Cd4053 Cd4053B Cd4053Be Dip- 20 pcs Ic Ic Ic Ic Ic Ic Ic Ic Ic Ic Ic I
TOP 10
Analog Multiplexer, Two-Way Connection High Speed High Speed Analog Multiplexer 16-Channel Analog Multiplexer 10 PCS
CUTULAMO
Our Score
Product Features
This Cd74Hc4067 Analog/Digital Multiplexer/Demultiplexer Has 16 Channels And Is Extremely Convenient.
You can use the multiplexer to transfer Ttl-based signals because it can also process digital signals. Using a pipe, send serial data to multiple devices or receive data from multiple devices at the same time.
The internal switch is bidirectional, with low on resistance and off leakage, so please turn it off first and then on to avoid talking.
It can be used with both digital and analog signals (the voltage must not exceed Vcc), and it can be connected in either direction. To control this, connect the chip's four digital outputs to the chip's address selection pin (So- S3) And give it the binary address of the channel you want to use.
It will completely disconnect the common pins (all switches will be disconnected) if you drive it to a high level.
TOP 11
CUTULAMO High Speed Analog Multiplexer
CUTULAMO
Our Score
Product Features
You can use the multiplexer to transfer Ttl-based signals because it can also process digital signals. Using a pipe, send serial data to multiple devices or receive data from multiple devices at the same time.
It will completely disconnect the common pins (all switches will be disconnected) if you drive it to a high level.
This Cd74Hc4067 Analog/Digital Multiplexer/Demultiplexer Has 16 Channels And Is Extremely Convenient.
The internal switch is bidirectional, with low on resistance and off leakage, so please turn it off first and then on to avoid talking.
It can be used with both digital and analog signals (the voltage must not exceed Vcc), and it can be connected in either direction. To control this, connect the chip's four digital outputs to the chip's address selection pin (So- S3) And give it the binary address of the channel you want to use.
TOP 12
High Speed Analog Multiplexer, High Speed Analog Multiplexer CD74HC4067 16-Channel Analog Multiplexer Low
KUIDAMOS
Our Score
Product Features
This Cd74Hc4067 Analog/Digital Multiplexer/Demultiplexer Has 16 Channels And Is Extremely Convenient.
You can use the multiplexer to transfer Ttl-based signals because it can also process digital signals. Using a pipe, send serial data to multiple devices or receive data from multiple devices at the same time.
The internal switch is bidirectional, with low on resistance and off leakage, so please turn it off first and then on to avoid talking.
It can be used with both digital and analog signals (the voltage must not exceed Vcc), and it can be connected in either direction. To control this, connect the chip's four digital outputs to the chip's address selection pin (So- S3) And give it the binary address of the channel you want to use.
It will completely disconnect the common pins (all switches will be disconnected) if you drive it to a high level.
TOP 13
16-Channel Analog Multiplexer, Analog Multiplexer Two-Way Connection Low On-Resistance High Speed Analog Multiplexer
CUTULAMO
Our Score
Product Features
It can be used with both digital and analog signals (the voltage must not exceed Vcc), and it can be connected in either direction. To control this, connect the chip's four digital outputs to the chip's address selection pin (So- S3) And give it the binary address of the channel you want to use.
The internal switch is bidirectional, with low on resistance and off leakage, so please turn it off first and then on to avoid talking.
This Cd74Hc4067 Analog/Digital Multiplexer/Demultiplexer Has 16 Channels And Is Extremely Convenient.
It will completely disconnect the common pins (all switches will be disconnected) if you drive it to a high level.
You can use the multiplexer to transfer Ttl-based signals because it can also process digital signals. Using a pipe, send serial data to multiple devices or receive data from multiple devices at the same time.
TOP 14
74HC4051 8-Channel-Mux CJMCU-4051 8 Channel Analog multiplexer Module
Midzooparts
Our Score
Product Features
8Hc4051 74Hc4051 74Hc4051 74Hc4051 Channel- Cjmcu-Mux Cjmcu-Mux Cjmcu-Mux Analog Multiplexer Module with 8 Channels (4051).
TOP 15
2Pcs AD ADG508AKNZ Analog Multiplexer Switch IC DIP-16 AD
Beizuu
Our Score
Product Features
Ic Dip- 2Pcs Ad Adg508Aknz Analog Multiplexer Switch 16 Ad
TOP 16
High Speed Analog Multiplexer, CD74HC4067 16-Channel Analog Multiplexer Low
SALUTUY
Our Score
Product Features
It can be used with both digital and analog signals (the voltage must not exceed Vcc), and it can be connected in either direction. To control this, connect the chip's four digital outputs to the chip's address selection pin (So- S3) And give it the binary address of the channel you want to use.
This Cd74Hc4067 Analog/Digital Multiplexer/Demultiplexer Has 16 Channels And Is Extremely Convenient.
The internal switch is bidirectional, with low on resistance and off leakage, so please turn it off first and then on to avoid talking.
It will completely disconnect the common pins (all switches will be disconnected) if you drive it to a high level.
You can use the multiplexer to transfer Ttl-based signals because it can also process digital signals. Using a pipe, send serial data to multiple devices or receive data from multiple devices at the same time.
TOP 17
Analog Digital Multiplexer Compatible Wearable Durable Stury 16 Channel Analog Multiplexer
Demeras
0.10 pounds
Our Score
Product Features
This Cd74Hc4067 Analog/Digital Multiplexer/Demultiplexer Has 16 Channels And Is Extremely Convenient.
It can be used with both digital and analog signals (the voltage must not exceed Vcc), and it can be connected in either direction. To control this, connect the chip's four digital outputs to the chip's address selection pin (So- S3) As well as sending it the binary A
The internal switch is bidirectional, with low on resistance and off leakage, so please turn it off first and then on to avoid cross talk.
It will completely disconnect the common pins (all switches will be disconnected) if you drive it to a high level.
You can use the multiplexer to transfer Ttl-based signals because it can also process digital signals. Using a pipe, send serial data to multiple devices or receive data from multiple devices at the same time.
TOP 18
Multifunction Analog Digital Multiplexer Applicable Analog Multiplexer Durable Convenient
Demeras
0.10 pounds
Our Score
Product Features
The internal switch is bidirectional, with low on resistance and off leakage, so please turn it off first and then on to avoid cross talk.
It can be used with both digital and analog signals (the voltage must not exceed Vcc), and it can be connected in either direction. To control this, connect the chip's four digital outputs to the chip's address selection pin (So- S3) As well as sending it the binary A
This Cd74Hc4067 Analog/Digital Multiplexer/Demultiplexer Has 16 Channels And Is Extremely Convenient.
It will completely disconnect the common pins (all switches will be disconnected) if you drive it to a high level.
You can use the multiplexer to transfer Ttl-based signals because it can also process digital signals. Using a pipe, send serial data to multiple devices or receive data from multiple devices at the same time.
TOP 19
Analog Digital Multiplexer Analog Multiplexer Durable Fast Applicable Multifunction 16 Channel Convenient Stury
Demeras
0.10 pounds
Our Score
Product Features
It will completely disconnect the common pins (all switches will be disconnected) if you drive it to a high level.
This Cd74Hc4067 Analog/Digital Multiplexer/Demultiplexer Has 16 Channels And Is Extremely Convenient.
The internal switch is bidirectional, with low on resistance and off leakage, so please turn it off first and then on to avoid cross talk.
It can be used with both digital and analog signals (the voltage must not exceed Vcc), and it can be connected in either direction. To control this, connect the chip's four digital outputs to the chip's address selection pin (So- S3) As well as sending it the binary A
You can use the multiplexer to transfer Ttl-based signals because it can also process digital signals. Using a pipe, send serial data to multiple devices or receive data from multiple devices at the same time.
TOP 20
Stury Fast 16 Channel Durable Applicable Analog Digital Multiplexer Analog Multiplexer Stable Convenient
Demeras
0.10 pounds
Our Score
Product Features
It will completely disconnect the common pins (all switches will be disconnected) if you drive it to a high level.
The internal switch is bidirectional, with low on resistance and off leakage, so please turn it off first and then on to avoid cross talk.
This Cd74Hc4067 Analog/Digital Multiplexer/Demultiplexer Has 16 Channels And Is Extremely Convenient.
It can be used with both digital and analog signals (the voltage must not exceed Vcc), and it can be connected in either direction. To control this, connect the chip's four digital outputs to the chip's address selection pin (So- S3) As well as sending it the binary A
You can use the multiplexer to transfer Ttl-based signals because it can also process digital signals. Using a pipe, send serial data to multiple devices or receive data from multiple devices at the same time.
TOP 21
10 PCS Analog Multiplexer,Breakout Board Module
Zhiyavex
Our Score
Product Features
Cd74Hc4067 Analog: 16 Channel Cd74Hc4067 This is a 16 channel Cd74Hc4067 Analog/Digital Multiplexer/Demultiplexer that is very convenient.
A Wide Selection of Products: It Can Be Connected In Either Direction And Is Suitable For Digital And Analog Signals (Voltage Cannot Be Higher Than Vcc). To control this, connect the chip's four digital outputs to the chip's address selection pin (So- S3) And give it the binary address of the channel you want to use.
Features of the Product Because the multiplexer can also process digital signals, it can be used to transfer Ttl-formatted data. Using a pipe, send serial data to multiple devices or receive data from multiple devices at the same time.
Resistance Is Low, And Leakage Is Minimal: The internal switch is bidirectional, with low on resistance and off leakage, so please turn it off first and then on to avoid cross talk.
Extremely High: It will completely disconnect the common pins (all switches will be disconnected) if you drive it to a high level.
TOP 22
Oumij1 High Speed Analog Multiplexer 10 PCS CD74HC4067 High Speed CMOS 16-Channel Analog Digital Multiplexer Demultiplexer
Oumij1
0.10 pounds
Our Score
Product Features
It can be used with both digital and analog signals (the voltage must not exceed Vcc), and it can be connected in either direction. To control this, connect the chip's four digital outputs to the chip's address selection pin (So- S3) As well as sending it the binary A
This Cd74Hc4067 Analog/Digital Multiplexer/Demultiplexer Has 16 Channels And Is Extremely Convenient.
The internal switch is bidirectional, with low on resistance and off leakage, so please turn it off first and then on to avoid cross talk.
It will completely disconnect the common pins (all switches will be disconnected) if you drive it to a high level.
You can use the multiplexer to transfer Ttl-based signals because it can also process digital signals. Using a pipe, send serial data to multiple devices or receive data from multiple devices at the same time.
TOP 23
Tosuny Analog Multiplexer, 10 PCS CD74HC4067 High Speed CMOS 16-Channel Analog Digital Multiplexer Demultiplexer
Tosuny
Our Score
Product Features
[It Was Used For] - It can be used with both digital and analog signals (the voltage must not exceed Vcc), and it can be connected in either direction. To control this, connect the chip's four digital outputs to the chip's address selection pin (So- S3) And give it the binary address of the channel you want to use.
[16- [Analog Multiplexer with Channels] - This Cd74Hc4067 Analog/Digital Multiplexer/Demultiplexer Has 16 Channels And Is Extremely Convenient.
[Digital Signal Processing] - You can use the multiplexer to transfer Ttl-based signals because it can also process digital signals. Using a pipe, send serial data to multiple devices or receive data from multiple devices at the same time.
[Note] - It will completely disconnect the common pins (all switches will be disconnected) if you drive it to a high level. Please keep in mind that the new and old versions of this product will be sent out at random, so make sure you don't mind before ordering.
[Internal Bidirectional Switch] – The internal switch is bidirectional, with low on resistance and off leakage, so please turn it off first and then on to avoid cross talk.
TOP 24
Analog Multiplexer, High Speed Analog Multiplexer 16-Channel Analog Multiplexer Low
SALUTUY
Our Score
Product Features
You can use the multiplexer to transfer Ttl-based signals because it can also process digital signals. Using a pipe, send serial data to multiple devices or receive data from multiple devices at the same time.
It can be used with both digital and analog signals (the voltage must not exceed Vcc), and it can be connected in either direction. To control this, connect the chip's four digital outputs to the chip's address selection pin (So- S3) And give it the binary address of the channel you want to use.
This Cd74Hc4067 Analog/Digital Multiplexer/Demultiplexer Has 16 Channels And Is Extremely Convenient.
The internal switch is bidirectional, with low on resistance and off leakage, so please turn it off first and then on to avoid talking.
It will completely disconnect the common pins (all switches will be disconnected) if you drive it to a high level.
Top Picks
Most Popular
Related