18 Of Best Angle Gauges In 2024
TOP 1
Wixey Digital Angle Gauge Type 2
Wixey
WR300 Type 2
6.00 x 4.00 x 1.00 inches
100.00 grams
Our Score
Product Features
Accordance: 1 Degrees
To calibrate the Angle Gauge to any reference surface, press the Zero Button.
To extend the life of your batteries, use 1 AAA batteries.
Range: +/- a full 180 degrees
TOP 2
GemRed 82412 Mini Digital Level Angle Gauge Angle Finder Protractor Inclinometer Aluminum Framework
GemRed
Our Score
Product Features
[Sturdy Aluminum Frame] It will last for years. Checking The True Level in [Two Measuring Mode]. The Relative Angle Between Two Surfaces is being checked.
[Extremely Reliable And Consistent] This Angle Gauge Is Designed To Be Accurate To 0. 2 In addition, the resolution is zero. The Range of Measurement: From 0 to 360 degrees (4*90). Unit of Display: Only a degree will suffice. It is useful in industries such as woodworking, construction, machinery, telecommunications, and automobiles. It's Prior to In-Factory Calibration
Digital Angle Gauge*1, Digital Angle Gauge*2, Digital Angle Gauge*3, Digital Angle Gauge*4, Digital Angle Gauge*5, Digital Angle Gau 1 x 5 volt alkaline battery, 1 x storage pouch, 1 x instruction
[Low Power Reversible Lcd Display With Error Indicator] The Digital Angle Gauge Has A Large Lcd Display With Backlight, Which Only Requires One Battery For Accurate, Quick, And Clear Measurements, Even In Dark Environments. If the digital angle gauge is used incorrectly (e.g., in the wrong direction), If the tilt is greater than 30 degrees diagonally, the display will display an error message to ensure that the measurement is accurate.
[Easy Battery Installation] There is no need for a screwdriver to install the battery. The Digital Angle Gauge can run for up to 50 hours on a single AAA battery. *Automatic Shutdown – After 5 minutes, the light will be switched off.
TOP 3
iGaging Angle Gage Backlit Digital Electronic Magnetic Level/Protractor/Bevel Gauge Angle Cube Gen 3
iGaging
35-2269
Our Score
Product Features
In any direction, you can flip the display to see it from a different angle.
Reversible Lcd Display with a Super Large Size. Absolute Level Tracing is a technique for determining the absolute level of something.
Three sides have super strong magnets embedded in them.
Relative/Absolute Angles Are Displayed In Degrees Or Tilt Percent. Range of measurement: 4 x 90 degrees = 360 degrees
The following are the measurements: 13" X 2. 13" X 0.
TOP 4
Digital Level Protractor Inclinometer Magnetic Level Angle Meter Angle Finder Level Box Angle Measuring Tool
FOLAI
Our Score
Product Features
The values can be read clearly and easily on the large digital LCD display, which has a backlight.
Functionality in two ways: Adjusting or checking the relative angles between the surfaces with an inclinometer. In addition, it can be used as a digital level in tight spaces. With a score of 180 (0-100), the digital spirit level is at an all-time high. 360° Range of Measurement
Wide Range of Applications - Our Digital Angle Gauge Provides Quick And Accurate Measurements In Car Repair, Table Saw Or Miter Saw Blade Measurement, Machine Manufacturing, Engineering, And Decoration, Making It An Essential Tool For Woodworking, Construction, And Machinery.
Magnets Built-In - On the bottom, there are built-in magnets to keep the attachment to any iron surface in place.
Shutdown by itself- Off - Shutdown on command- It turns off after 3 minutes of inactivity and comes with 1 aaa alkaline battery.
TOP 5
Accusize Industrial Tools 18 Pc Angle Gauge Set, 3602-5050
Accusize Industrial Tools
EG02-5050
10.24 x 7.87 x 1.57 inches
0.55 pounds
Our Score
Product Features
Each gauge has eight different gauging surfaces. For Accurate Checking, Precision Finished Edges are used. Primary, 1/2 Primary, and Complementary Angles are all checked by each gauge.
Made of stainless steel and finished in a satin finish. For Easy Use, There Are 18 Individual Gages
Angles And I: A Fast And Accurate Inspection Or O. Chamfers in or out of the machine; Lathe Tool Positioning for Chamfers
Tools And Cutters Are Used To Check Angles On The Ground. Fast Set- Workpiece Setups and Fixtures
Set-Measuring is no longer a time-consuming task. Ups. Every inspector, tool maker, machinist, layout and draftsman should have this book.
TOP 6
Calculated Industries 7434 AccuMASTER 2-in 1 Magnetic Digital Level and Angle Finder
Calculated Industries
7434
2.25 x 2.25 x 1.25 inches
Our Score
Product Features
True to form The bright backlit Stayglow(Tm) display on the Accumaster will never leave you in the dark. The numbers on the display are large and easy to read. There Will Be No More Eye- Balling Important Measurements This Handy Tool Provides Exact Numbers So You Can Be Confident In Making The Most Precise Of Cuts. It automatically shuts off after 3 minutes of inactivity, and its improved Mems Sensor extends battery life even further, ensuring that it is always ready to use, regardless of how long it has been in the tool drawer.
Dual-purpose design - For carpentry, this tool can be used as a bevel gauge as well as a digital level. It is used to measure angles in woodworking as a bevel gauge. The Accumaster's small size allows it to fit into tight spaces, allowing you to get the measurements you need to finish your project; it can also be used for welding, fabrication, and even tire alignment.
Strong Magnetic Foundation - This digital protractor can easily and securely attach to miter saw, band saw, and table saw blades thanks to its powerful magnetic base. It's also suitable for use on fences, tables, and any other metallic surface. You Don't Have To Worry About Keeping The Tool In Place While Taking Measurements Any Longer, Thanks To Its Strong Magnet.
Ip54 Rating - Certified This woodworking tool is dust and water resistant to Ip54 standards. It Can Be Used In Any Professional Woodshop, Garage, Or Backyard Shed Because It Is Water Resistant. This Measuring Tool Is Exactly What You Need To Advance From Novice To Master Carpenter. This tool will assist you in completing any project, regardless of your level of experience.
TOP 7
HFS 18 Piece Angle Gauge Set
HFS
0.20 pounds
Our Score
Product Features
Each gauge has eight measuring surfaces.
There are 18 gauges total.
Construction in Stainless Steel
Each gauge should be used to check the primary, 1/2 primary, and complementary angles.
Each gauge has an angle degree etched into it.
TOP 8
AccuRemote Digital Electronic Magnetic Angle Gage Level/Protractor/Bevel Gauge
AccuRemote
4.50 x 3.70 x 1.90 inches
0.44 pounds
Our Score
Product Features
In any direction, you can flip the display to see it from a different angle.
Reversible Lcd Display with a Super Large Size. Absolute Level Tracing is a technique for determining the absolute level of something.
On all three sides, there are strong magnets embedded.
Relative/Absolute Angles Are Displayed In Degrees Or Tilt Percent. Range of measurement: 4 x 90 degrees = 360 degrees
The following are the measurements: 3/8" X 2- 3/8" X 1- 3/8".
TOP 9
Drill Angle Gauge, 3Pcs Drill Bits Angle Gauge Set Dirll Sharpener Tools S/S Angle Measuring Gage Drill Bit Angle
Vikye
7.87 x 7.87 x 3.94 inches
0.22 pounds
Our Score
Product Features
[Concept]: It Is A Practical Angle Gauge Set In Drill Bits Angle Measuring And Drill Sharpener Inspection, And It Comes With A Case, Making It Easy To Carry.
[Material]: [Material]: [Material]: [ This Angle Gauge Set is made of high-quality stainless steel that has a high hardness and is long-lasting in use.
[Usage] : For whom is it appropriate? Calculation of Angles
[Aspect]: Grinding Gauge For 118 Apex Diameter Of Not More Than 50Mm Of Grinding Twist Drills Diameter Drill Front Edge Of The Protractor 50 Gauge 118 Apex Angle Of Twist Drills Grinding Gauge
[Apex Angle of the Drill]: Check the apex angle of the drill (60, 70, 90, 110, 118, 125, 135, 150, 160). For a tooth-cutting tool, the angle is 60 degrees. Measuring Angles With A Shaped Angle 55 Degree Angle And Metric Thread, Inch Thread Inspection, Blade, And Special Measuring Tools
TOP 10
IRWIN Tools Magnetic Angle Locator
IRWIN
1794488
6.30 x 7.48 x 1.38 inches
0.40 pounds
Our Score
Product Features
The Locator Is Extremely Simple To Use. The High- The registration marks on the Visibility Indictor are clear and easy to read.
This angle finder has a magnetic base and a V-shaped V-shaped V-shaped V-shaped V-shaped V-shaped V Conduit and pipe groove edge
The High- The Impact Abs Plastic Body Is Long-Lasting, Lightweight, And Wear-Resistant.
TOP 11
Proster 0-225° Digital Angle Finder LCD Protractor Angle Gauges Spirit Level 400mm/16 inch Vertical Horizontal Dual Spirit Level
Proster
16.54 x 0.87 x 1.97 inches
Our Score
Product Features
[Easy Reading] The Exact Measuring Results Are Shown At Once With The Data Holding Function On The Easily Readable Lcd Display.
[Position] At a measuring precision of 0.25 (vertical and horizontal), 225 (vertical and horizontal) Note: It Isn't a Level in the Digital Age
[Friendly Details] Automatically Shuts Off After Five Minutes To Help Batteries Last Longer With A Low Power Alarm
Hold Button To Lock Angle; [Convenient Design] A hole in which the digital angle level can be hung.
[Application] Ideal for measuring exact angles such as trays, sloping roofs, and handrails, as well as for woodworkers to use in lineation.
TOP 12
Angle Gauge Drill Bits, 3Pcs S/S Angle Gauge Measurement Drill Sharpener Tool Set Including Drill Diameter
Yosoo
5.31 x 3.74 x 0.79 inches
Our Score
Product Features
Parameters for Professionals and the General Public: It can also measure blade angles. 60 Degree Cutting Tool For Inspection Of Toothshaped 55 Degree Angle, Metric Thread, And Inch Thread
Measurement Tool for Professionals: This Angle Gauge Set In Drill Bits Angle Measuring And Drill Sharpener Inspection Is A Practical Set Of Angle Gauges.
Applicable Application: The Protractor 50 Gauge 118 Angle Twist Drills Grinding Gauge Is Suitable For 118 Diameter Drills With A Diameter Of Less Than 50Mm Grinding Twist Drills
Long-Term Durability- Time Use: This set of Angle Gauge is made of high-quality stainless steel, and it has a high hardness and is long-lasting. Time Use
Angle Range in General: The Angle Range Covered By This Drill Bit Gauge Is Extensive: 60, 70, 90, 110, 118, 125, 135, 150, & 160
TOP 13
Angle Gauge CNC Lathe Cutting Template Measuring Tool Stainless Steel and Pocket Size
Angle gauge
Our Score
Product Features
There are eight angles in total: 29 degrees, 30 degrees, 40 degrees, 45 degrees, 50 degrees, 55 degrees, 60 degrees, and 65 degrees
The following is included in the package: 1 Set of Angle Gauge Templates
Stainless Steel Is Not Easy To Deform Or Rust, And Is Extremely Long-Lasting
Easy To Read Laser Engraving
Design with a Key Chain and a Pocketed Size
TOP 14
AUTOUTLET 4 X 90°Digital Angle Finder Electronic Angle Gauge
AUTOUTLET
Our Score
Product Features
[Magnets on all four sides] The magnets on all four sides allow you to attach the gauge to a steel object from any side, making it more convenient to use.
This Digital Level Angle Finder Is Multifunctional: [Autoutlet Digital Angle Finder] Automatic power off, data hold, zero setting, and low battery warning, among other features Ip54 rating for water resistance.
[Wide Application] This Electronic Angle Gauge Allows For Quick And Accurate Measurement In Woodworking, Construction, Machinery, Telecommunications, and Automobiles, Among Other Industries. In the workplace, you've got a fantastic helper.
[What You Get] The following items are included in the package: 1 x Digital Level Box with 4 x 4 x 4 x 4 x 4 1*User Manual, 1*Side Magnet, 2*AA Batteries, 1*Portable Bag
Ebtn (Enhanced Background Twisted Nematic) Lcd Display (Large Lcd Display With Backlight) Lcd Display (Enhanced Background Twisted Nematic) Lcd Display (Enhanced Background Twisted Nematic) Lcd Display (Enhanced Background Twisted Nematic) Lcd Display (Enhanced Background Twisted Nematic) Lcd The Numbers That Have Been Illuminated The large Ebtn (Enhanced Background Twisted Nematic) LCD Display greatly improves the reading experience, and the illuminated numbers add to the overall experience.
TOP 15
Beslands Angle Block Set 1°, 2°, 3°, 4°, 5°, 10°, 15°, 20°, 25°, 30° Machinist Tool
Beslands
1.58 pounds
Our Score
Product Features
There are ten angle blocks in this set: 123451015202530. With the help of a portable box
They can also be sewn together to make different angles.
High Accuracy: +/- 0 seconds, 20 seconds Per inch, 0001" Dimensions of thickness:
Material: It's made of cast iron. Grinding with a high degree of precision.
Angle Blocks Are An Important Tool For Precise Angular Alignment And Measurement In Grinder And Milling Applications.
TOP 16
Holulo Digital Angle Finder Portable Dust & Water Proof 4X90° Angle Gauge Level Box
Holulo
Our Score
Product Features
[High Accuracy] It Offers Precise Measurements With An Accuracy Of 0. 2 Degrees
[Display on LCD] There Are Four Measuring Units To Choose From: Degree()Percentage(%), Mm/M, and In/Ft
(Dust)
[Built-In Magnets] On the base, there are powerful built-in magnets. It causes the gauge to tightly absorb on the iron surface.
[Automatic Power Turn Off] To easily store data and read it, use the Hold Button function.
TOP 17
PAGOW 118 Degree Drill Bits Gauge
PAGOW
Our Score
Product Features
Drill Bit Sharpening Angle of 118 Degrees Is Perfect For Front Edge Measuring This item is suitable for both professional and personal use.
The Reading on the Ejection Scale Is Much Clearer. With a clear scale, a thicker design, and more wear-resistant properties The ability to resist.
From 0 to 20, the Drill Bit Edge Dimension is divided into 1/2 Mm increments.
Size: 3. 44X1. 36" (87 cm) 5X34. 5Mm. Dimensions of thickness: 1Inch / 05Inch 3Mm. Pocket- Sized for easy transport, use, and cleaning.
Made of high-quality stainless steel with excellent bending and corrosion resistance.
TOP 18
KUIDAMOS 3Pcs/Set Drill Bit Angle Gauges
KUIDAMOS
7.87 x 7.87 x 3.94 inches
0.22 pounds
Our Score
Product Features
Diameter Drill Front Edge Of The Protractor 50 Gauge 118 Summit Angle Of Twist Drills Grinding Gauge Suitable For 118 Summit Diameter Of Not More Than 50Mm Of Grinding Twist Drills [118 Degree Angle Drill Sharpening Tools] Diameter Drill Front Edge Of The Protractor
[Durable Drill Bits Angle Gauge] This Angle Gauge Set Is Made Of High Quality Stainless Steel, Has A High Hardness, And Is Long Lasting When In Use.
Cutting Tool Angle Is 60 Degrees For A Toothshaped Angle 55 Degree Angle And Metric Thread, Inch Thread Inspection, Blade And Special Angle Measuring Tools
Check the Drill Summit Angle (60, 70, 90, 110, 118, 125, 135, 150, 160) with the [Practical Angle Gauge Set]. Is An Angle Gauge Set In Drill Bits Angle Measuring And Drill Sharpener Inspection A Practical Angle Gauge
[After- [After-Sales Service] If You Have Any Issues During Use, You Can Contact Our After-Sales Service. In order to provide you with a better shopping experience, we offer a sales service.