23 Of Best Automotive Performance Intake Manifold Gaskets In 2024
TOP 1
Edelbrock 7201 Intake Manifold Gasket
Edelbrock
7201
0.35 pounds
Our Score
Product Features
On rough, irregular flange surfaces, the gasket material provides excellent sealing.
Silicone beads around each port opening ensure perfect sealing.
The gasket can expand and fill any imperfections on a sealing surface when it is compressed.
Under Load Provides A Minimum Of 30% Recovery
End seals are not included, and silicone sealant is recommended in place of them.
TOP 2
Edelbrock 9265 Square-Bore Heat Insulator Gasket
Edelbrock
9265
0.44 pounds
Our Score
Product Features
The thickness of the material is 0 millimeters. 320"
Fuel Percolation Is Prevented With This Design
Extended Carburetor Studs are included.
a gasket for the barrel
Center of the Hole is Divided
TOP 3
Edelbrock 7203 Intake Manifold Gasket
Edelbrock
7203
0.40 pounds
Our Score
Product Features
It is made up of a V-shape. Crossover with a shaped cross section and a growing cross sectional area
It also comes with a powder. The finish is a light titanium gray that has been coated.
Each port opening has a silicone bead around it.
Provides a Perfect Seal For Your Manifold And Cylinder Heads
Fit Type: Specific to the vehicle
TOP 4
Edelbrock 7224 Intake Gaskets
Edelbrock
7224
0.33 pounds
Our Score
Product Features
Quantity of the package:
Type of product: Auto Part
Dimensions of the package 04cm (L) x 10cm (W) (W) 414 cm X 0. 508Cm (H)
Designed in the United States
TOP 5
Mr. Gasket 146 TPI Runner Gasket Set
Mr. Gasket
0.25 pounds
Our Score
Product Features
To Meet Your Exact Specifications, It Can Be Trimmed Into An Infinite Number Of Configurations.
It creates a leak-proof seal that is airtight.
For exact fit and years of trouble-free service, precision die cutting is used.
Made from a. Cellulose And Nitrile Composite, 062 Inch Thick
Specifically Designed For Small Block Chevys With 1. Ports with a diameter of 750 inches
TOP 6
Edelbrock 7223 Intake Manifold Gasket
Edelbrock
7223
0.35 pounds
Our Score
Product Features
It is made up of a V-shape. Crossover with a shaped cross section and a growing cross sectional area
It also comes with a powder. The finish is a light titanium gray that has been coated.
Each port opening has a silicone bead around it.
Provides a Perfect Seal For Your Manifold And Cylinder Heads
TOP 7
Edelbrock 7220 Intake Manifold Gasket
Edelbrock
7220
0.40 pounds
Our Score
Product Features
A perfect seal is ensured by a silicone bead around each port opening.
End Seals Should Be Replaced With A Silicone Sealant, According To Edelbrock.
Each item is sold separately.
It has a port height of two feet. With a port width of one thousand and a length of one thousand, With a thickness of 0.200,
The end seals are not included.
TOP 8
Edelbrock 7231 Upper to Lower Intake Gaskets
Edelbrock
7231
0.30 pounds
Our Score
Product Features
The foundation is in place. Rather than powder, use cast. Coated
Titanium Gray Powder-Light Titanium Gray Powder-Light Titanium Gray Powder- Upper and lower coats, as well as the plenum cover
A provision for exhaust gas recirculation (Egr) has been made, and a stock replacement part, the Pcv, is available.
Provides 1,500 watts of power 6,500 revolutions per minute
Because of the silicone bead around each port opening, perfect sealing is guaranteed.
TOP 9
Mr. Gasket - 77C Performance Intake Manifold Gasket
Mr. Gasket
1.94 pounds
Our Score
Product Features
The thickness is 1/16" thick.
Cellulose and nitrile materials were used to create this product.
Individually packaged and sold
Allows You To Customize- Construct Your Own Gasket
24" long by 6" wide is the size of this item.
TOP 10
Mr. Gasket 12 Pt Intake Manifold Bolt Kit Sb Chev
Mr. Gasket
6091MRG
0.60 pounds
Our Score
Product Features
Heat Treated To Grade 8 Specs With A Zinc Plated Finish 00 Inch Long Three Eighths Coarse Thread 12 Point Bolts
Features a 12 point head that is smaller than standard, making it ideal for tight spaces.
Set Of 12
Specifically Designed For Small Block Chevys
Extra Thick Flat Washers Are Included For Uniform Clamping Pressure
TOP 11
Mr. Gasket 5831 Stock Ultra-Seal Intake Manifold Gasket Set
Mr. Gasket
5831
0.55 pounds
Our Score
Product Features
It's non-wicking and can withstand temperatures of up to 600 degrees Fahrenheit. Heat (in degrees)
A Tight Seal Is Achieved By Applying Silicone Beading Around Each Port. Seal to Keep Water Out
Dimensions of the port are 2. 13" tall by 1" wide 20" Wide
Invented With Stock Ports In Mind
Sealing and abrasion resistance are provided by cellulose and nitrile.
TOP 12
Mr. Gasket 5838 Ultra-Seal Intake Gasket Set
Mr. Gasket
5838
0.38 pounds
Our Score
Product Features
Cellulose Composite Gasket Material was used to create this product.
Designed To Offer Superior Sealing And Longevity
They're simple to put together and don't corrode.
Durable Enough To Meet Every Engine's Sealing Needs
Trimmable For A Modified Port
TOP 13
Mr. Gasket 5827 Ultra-Seal Oval Port Intake Gasket
Mr. Gasket
5827
26.00 x 4.20 x 0.10 inches
4.25 pounds
Our Score
Product Features
Port of the Oval
High-Performance, Drag Racing, And Oval Track
Recommended for the replacement of original equipment
The entire manifold end rail seals and the distributor gasket are included.
With a thickness of 1/16 inch and a port dimension of 1 inch and a half, 75" wide x 2" tall 16 Height
TOP 14
Edelbrock 3833 Performer Intake Manifold Gasket
Edelbrock
3833
0.35 pounds
Our Score
Product Features
Manifolds and heads from the Performer Series have been designed to work together.
On rough, irregular flange surfaces, it seals exceptionally well.
In Intermittent Operating Temperatures Up To 400 Degrees Fahrenheit, It Provides Optimal Sealing
Most chemicals, including gasoline, alcohol, coolant, and oils, are impervious to it.
For a clean, positive seal, the ports are surrounded by an embossed silicone bead.
TOP 15
Mr. Gasket 84A Rear End Gasket
Mr. Gasket
0.30 pounds
Our Score
Product Features
Gm Passenger Cars With 12 Bolt Rear Ends Have Been Specifically Engineered
Allows for an airtight, leak-proof seal
A Heat-Resistant Nitrile Rubber Compound was used to create this product.
Years of trouble-free service are ensured thanks to the durable design.
For a Consistent, Precise Fit, Die Cut
TOP 16
Edelbrock 7202 Intake Manifold Gasket
Edelbrock
7202
0.35 pounds
Our Score
Product Features
On rough, irregular flange surfaces, the gasket material provides excellent sealing.
Silicone beads around each port opening ensure perfect sealing.
The gasket can expand and fill any imperfections on a sealing surface when it is compressed.
Under Load Provides A Minimum Of 30% Recovery
End seals are not included, and silicone sealant is recommended in place of them.
TOP 17
Edelbrock 7277
Edelbrock
7277
0.25 pounds
Our Score
Product Features
Quantity of the package:
Type of product: Auto Part
Dimensions of the package (L) 467cm X (W) 10cm 668 cm (W) X 1 meter 016Cm (H)
Designed in the United States
TOP 18
Mr. Gasket 316 Performance Intake Manifold Gasket
Mr. Gasket
0.30 pounds
Our Score
Product Features
Specifically Designed For Chrysler W2 Cylinder Heads
It creates a leak-proof seal that is airtight.
Even with minimal clamp force, it seals and releases with ease every time.
Ensures maximum torque retention, ideal crush resistance, and high shear strength.
062 inch thick and precision die cut for a perfect fit and years of trouble-free service.
TOP 19
Mr. Gasket 214 Intake Gasket
Mr. Gasket
0.29 pounds
Our Score
Product Features
Specifically designed for 351 Cleveland Fords with 2. 660 Inch x 660 Inch x 660 Inch x Intake Ports of 830 Inch
It creates a leak-proof seal that is airtight.
Even with minimal clamp force, it seals and releases with ease every time.
Ensures maximum torque retention, ideal crush resistance, and high shear strength.
062 inch thick and precision die cut for a perfect fit and years of trouble-free service.
TOP 20
Edelbrock 7235 Intake Manifold Gasket
Edelbrock
7235
24.20 x 4.20 x 0.50 inches
0.49 pounds
Our Score
Product Features
It has a port height of two feet. With a port width of one and a horsepower of 110, this is a powerful combination. With a thickness of 0 and a diameter of 080, 120
The end seals are not included.
Each item is sold separately.
End Seals Should Be Replaced With A Silicone Sealant, According To Edelbrock.
There are no Embossed Silicone Beads on this item.
TOP 21
Weiand 7077 Supercharger To Manifold Gasket
Weiand
7077
12.70 x 17.00 x 0.30 inches
0.51 pounds
Our Score
Product Features
Leakage isn't an issue with this product.
Material is of high quality.
Increases the longevity of the product
Irregularities are filled in with this product.
Allows for a less accurate mating surface
TOP 22
Mr. Gasket 5851 Ultra-Seal Intake Gasket Set
Mr. Gasket
5851
0.40 pounds
Our Score
Product Features
Cellulose Composite Gasket Material was used to create this product.
Designed To Offer Superior Sealing And Longevity
They're simple to put together and don't corrode.
Durable Enough To Meet Every Engine's Sealing Needs
Trimmable For A Modified Port
TOP 23
Mr. Gasket 5819 Ultra-Seal Intake Manifold Gaskets Bb Chev
Mr. Gasket
5819
0.30 pounds
Our Score
Product Features
Port Raised Rectangular Rectangular Raised Rectangular Raised Rectangular
High-Performance, Drag Racing, And Oval Track
Recommended for the replacement of original equipment
The entire manifold end rail seals and the distributor gasket are included.
With a thickness of 1/8 inch and a port dimension of 1. 75" wide x 2" tall 50 Height