19 Of Best Automotive Replacement Alternator Resistors In 2024
TOP 1
4Pcs Aaron 50W 6ohm Load Resistors
Aaron
A4-50W-6ohm
0.26 pounds
Our Score
Product Features
Daytime Running Light, Fog Light, and Headlight Led Bulbs Are Not Designed To Work Consistently. Resistors can heat up to the point where they melt nearby plastic parts.
After installing LED light bulbs, there is a solution for a quick turn signal blinking response.
You can splice the wires together with the provided splice taps (quick but not secure). Alternatively, you can cut the wires and connect them more firmly.
Warning: Load Resistors are similar to halogen bulbs in that they generate heat. When they're working, they get extremely hot. Screws (not included) are used to secure them to a metal surface. Resistors should be kept at least an inch away from plastic components.
Typically, each led bulb installation necessitates the connection of one resistor in parallel (see diagram below for instructions).
TOP 2
Zento Deals 8 Pieces of 6 Ohm 50W LED Load Resistors
Zento Deals
LEPAZA55333
Our Score
Product Features
Light Errors are Corrected – Blinker Flash Error, No Flashing Or Burnt Out Bulb Indications, Hyper Or Error Flashing Of Led Turn Signal, Parking / Driving Running Light, Or License Plate Light are all problems that the Zento Deals 6 Ohm 50W Led Load Resistors will fix.
Controls the flow of current - The Zento Deals 6 Ohm 50W Led Load Resistors will regulate the flow of current in electrical circuits. Because led lights use less energy than regular lights, it will apply a specific amount of resistance to them in order for them to work properly.
Universalism: The Zento Deals 6 Ohm 50W Led Load Resistors Can Be Connected Across The Turn Signal Bulbs Or License Plate Lights To Simulate The Load Of A Regular Filament Bulb (2 Amp Load) On Any Vehicle.
Exceptional Quality- The Zento Deals 6 Ohm 50W Led Load Resistors are constructed of high-quality materials to ensure long-term performance.
Simple to set up - The Zento Deals 6 Ohm 50W Led Load Resistors Are Simple To Install, Simply Connect One Wire To Ground And The Other Wire To The Turn/Brake Wire, Using The Quick Wire Clip Provided To Avoid Cutting Any Existing Wires. For each turn signal bulb, a load resistor is required. Note: Because the led load resistors get hot, they should not be mounted on plastic, hoses, or painted surfaces.
TOP 3
Zone Tech 50W 6Ohm LED Load Resistors
Zone Tech
LB0072
5.10 x 0.60 x 4.00 inches
Our Score
Product Features
Light Errors are Corrected - The Zone Tech Led Load Resistors restore the proper operation of your LED lights. This will fix problems with LED turn signal lights or license plate lights, such as hyper flashing, no flashing, or burnt out bulbs.
Current Flow is Reduced – The Zone Tech Led Load Resistors work by reducing current flow while also lowering voltage levels in circuits. They're being used to simulate the load of a regular filament bulb (2 amp load) in this case.
a universal concept The Zone Tech Led Load Resistors can be connected across turn signal bulbs or license plate lights to simulate the load of a regular filament bulb on any vehicle. For each turn signal or license plate light bulb, a single led resistor is required.
Quality Assurance – The Zone Tech Led Load Resistors are made of high-quality materials to provide maximum strength and durability for long-term use.
Installing it is simple. The LED Load Resistors from Zone Tech are simple to install. Simply connect one of the resistor's wires to the positive wire and the other to the ground wire. T- To make the installation process easier, taps are included in the package.
TOP 4
Alla Lighting 3157 3057 t25 50W 6Ohm Error Free LED Lights Load Resistor Adapter Fix Flashing Fast Blinking Canbus Bypass Wiring Harness
Alla Lighting
2.00 x 0.70 x 0.70 inches
Our Score
Product Features
This Load Resistors Will Not Work With The Ck / Srck Socket. Please Double-Check That The Stock Socket Is Standard Type Before Purchasing. Shell made of aluminum Heat Dissipation is excellent. For each bulb, one led resistor is required.
Keep in mind that Please double-check that the stock OEM harness matches the female connector, and that the installation guide number is correct. To Install Correctly, There Are 4 Pictures And An Installation Guide Video. Before purchasing, please double-check the stock housing to ensure that the load resistor will fit. 2 x 3157 Led Load Resistors For Fixing Led Error Codes Or Anti-Static Flicker (Solving The Hyper Flash Signal); Flicker (Solving The Signal); Flicker (Solving The Signal Installation is simple: All- There is only one design. Led Turn Signal Light Plug-and-Play Setup, Back-up Light Reverse Light in the Up Position
When LED bulbs are installed, they will no longer flash or flicker. Please make sure that the metal resistance does not come into contact with the plastic wire, as this will cause the plastic to melt.
Refer to this: 3047, 3047Ll, 3047K, 3057A, 3057All, 3057, 3057St, 3057K, 3057Kx, 3057X, 3057X, 3057Klcp, 3057Ll, 3155, 3155Ll, 3157A, 3157Ak, 3157, 3157K, 3157X, 3157Ll, 3157St, 3157Kx, 3157Na, 3157Nall, 3157N
Removes Obc And Can- When Led Bulbs Are Installed, There Are Warning Errors On The Dashboard. Used For: Front and rear turn signal blinker light, halogen/incandescent Upgrading Led Bulbs for Reverse Light, Brake Stop Tail Light Lamps
TOP 5
Twidec/4Pcs 50W 8Ohm LED Load Resistors
Twidec
Our Score
Product Features
The current flow in electrical circuits will be controlled by 8 Ohm 50W Led Load Resistors. In most cases, each led bulb installation necessitates the connection of one resistor in parallel.
Because led lights use less energy than regular lights, it will apply a specific amount of resistance to them in order for them to work properly. one- Warranty is for a year.
After installing a SMD LED light bulb, the "Bulb Out Signal" / "Obc Error Message" is resolved. After installing a LED light bulb, there is a solution for a quick turn signal blinking response.
When in use, load resistors heat up like light bulbs and become extremely hot. Resistors should be kept inches away from plastic parts.
If the LED Load Resistor does not resolve the flashing issue, the LED bulb is faulty.easy Installation: Simply splice the wires together using the splice taps provided.
TOP 6
O-NEX LED Resistor Kit HB4 9006 HID Relay Harness Adapter Anti Flicker Error Decoder Warning Canceller
O-NEX
HID-RLR
7.00 x 4.00 x 1.00 inches
Our Score
Product Features
Canbus Anti-Static 50W 8 Ohm Resistor Flicker.
Relay Harness for Heavy-Duty Applications.
It's compatible with both hid and hidden cameras. Play the Setup game.
Warning - To prevent damage to the vehicle, please mount the load resistor on a metal surface or a hot resistant surface. Mounting on plastic is not a good idea.
Fix Error Codes, Flickering, and Shut Off at Random; It Is Possible That Not All Cars Will Work.
TOP 7
JABINCO 4Pcs 6-ohm Load resistors
JABINCO
0.22 pounds
Our Score
Product Features
It's simple to set up. Just connect the wires and add a splicing tap. (It's quick, but it's not necessarily solid.) Alternatively, you can cut the wires and connect them more firmly.
4 x 6 ohm 50 watt led load resistors for headlights Blinker Flash Error, Hyper Or Error Flashing Of Led Turning, Parking, And Driving Signals Or Licence Plate Display Light
For each turn signal bulb or license plate bulb, a single led resistor is required.
When used properly, load resistors are a joy to use. When they're working, they get extremely hot. Not mounted on a plastic surface, but on a metal one. Resistors should be kept at least an inch away from plastic parts.
It can be connected to a turn signal or license plate light to simulate the load of a normal light (2 amp load).
TOP 8
50W 6Ohm LED Load Resistors
GLL
1.97 x 0.67 x 0.87 inches
Our Score
Product Features
It Can Be Connected Across The Turn Signal Bulbs To Simulate The Load Of A Regular Filament Bulb (2 Amp Load). [Function] It Can Work On Any Vehicle And It Can Be Connected Across The Turn Signal Bulbs To Simulate The Load Of A Regular Filament Bulb (2 Amp Load). Fix the 1157(Bay15D) Led Turn Signal Light's Blinker Flash Error, Hyper, Or Error Flashing.
Load Resistors For 1157(Bay15D) Led Turn Signal Light Fix, This Will Solve Led Related Turn Signal Lights Problems, No Flashing Or Burnt Out Bulb Indications [4Pcs 50 Watts 6Ohm Load Resistors 8Pcs Quick Wire Clips] Load Resistors For 1157(Bay15D) Led Turn Signal Light Fix, This Will Solve Led Related Turn Signal Lights Problems,
[Test For Sale] All of our products have been thoroughly tested before being made available for purchase. Please feel free to purchase with confidence. We provide a "2 Year" warranty, as well as replacement or refund options. Please do not hesitate to contact us if you have any questions about the load resistors.
[Easy to Install] With 13mm wire at each end of the resistor and a T-connector Taps. Simply use the splice taps provided to connect the wires. There is no need to cut the wire. Each turn signal bulb necessitates a single LED resistor.
[Warning] When in use, load resistors become extremely hot. It should be mounted on a metal surface rather than a plastic one. When the led light is turned on, please do not touch it.
TOP 9
KATUR 2pcs 50W 8ohm 3157 3047 3057 3457 3155 Led Load Resistors Fix LED Bulb Fast Hyper Flash
KATUR
2AM-CL-1221-3157B
Our Score
Product Features
Fits: Standard Base For Turn Signal Bulb Or Led License Plate Lights To Avoid Hyper Flashing, No Flashing, Or Burnt Out Bulb Indications 3047, 3057, 3057A, 3155, 3157, 3157A, 3157Na, 3357, 3357A, 3454Na, 3457, 3457A, 3457Na, 3757A, 4057, 4114, 4157, 4157Na, 5702A, 5702Ak
Error 2Pcs 50W 8 Ohm 3157 Standard Base Led Load Resistors For Led Turn Signal Lights Or Led License Plate Lights
When in use, load resistors heat up like light bulbs and become extremely hot. Install them on a metal surface rather than a plastic one. As a result, don't touch it directly with your hand.
Please look for Item B00 if you only need the 50W 8Ohm Load Resistor Quick Wire Clip.
For the majority of automobiles, such as: Cadillac, Chevrolet, Chrysler, Dodge, Jeep, Mercedes Benz, and other luxury automobiles
TOP 10
SOCAL-LED 2pcs LED Load Resistors 25W 10 ohm LED Bulbs Turn Signal Error/Blinker/Hyper Flashing
SOCAL-LED
4.50 x 0.80 x 4.00 inches
Our Score
Product Features
After installing a LED light bulb, fix hyper flashing (fast turn signal blinking).
After installing a LED light bulb, use a Led Load Resistor to fix the "Bulb Out Signal" / "Obc Error Message."
Simple to set up. No wire cutting is required; simply connect the wires with the provided splice taps.
Each led bulb necessitates the connection of one resistor in parallel.
Caution: When in use, load resistors heat up like light bulbs and become extremely hot. Install them on a metal surface rather than a plastic one.
TOP 11
2Pcs Innovited 9005 LED Resistor 50W 6ohm Load Resistors Canbus Fix LED Bulb Error Code
Innovited
Our Score
Product Features
Simple to set up. It usually only takes a few minutes! "Plug- And- In the majority of vehicles, you can "play."
Cancel the Obc (On-Board Computer) Error Message Check the computer on the board.
It Will Solve The Obc (On-Board Computer) Issue Warning Error Code or Bulb Rejection on the Board Computer; Because standard led lights may not function properly in European and newer Japanese vehicles equipped with the Obc Canbus wiring system.
A single resistor is needed for each LED bulb installation.
9005 Led Bulbs Compatibility
TOP 12
EZGO 620430 Pre Charge Resistor Assembly
E-Z-GO
620430
4.90 x 0.40 x 0.30 inches
Our Score
Product Features
In the solenoid, it is in charge of regulating the voltage and current flow.
Fits the Year 2010- Current E-mail Addresses 48V Txt by Go Electric
6 Ohm at 500 Ohm 5 watts, includes everything you need to put it together: Ring Terminals Resistor (620430) [Qty: 1] 2) (23195G1) (23195G1) (23195G1) (23195G1)
TOP 13
Safego 4-Pieces 50W 3Ohm LED Load Resistors
Safego
0.31 pounds
Our Score
Product Features
Exceptional Quality- Led Load Resistors Are Made Of High-Quality Materials To Ensure Maximum Strength And Durability. Led Load Resistors Are Heat, Temperature, Moisture, High Vibration, And Explosion Resistant For Long-Term Use.
Light Errors - How to Fix Them Blinker Flash Error, No Flashing Or Burnt Out Bulb Indications, Hyper Flashing Of Led Turn Signal Or License Plate Light Bulbs, Obc Error Messages Of Other Led Bulbs Can All Be Fixed With 4Pcs 50W 3Ohm Load Resistors
Package: 50W 3 Ohm Load Resistors, 4Pcs (2 Pairs) With 8Pcs T-Connectors Taps. Led Load Resistors Work On Any Vehicle And Can Be Connected Across The Turn Signal Bulbs Or License Plate Lights To Simulate The Load Of A Regular Filament Bulb. We Offer "One Year" Warranty. For each turn signal or license plate light bulb, a single led resistor is required.
Installing it is simple. LED Load Resistors are simple to install. Simply connect one of the resistor's wires to the ground and the other to the positive wire, using the provided quick wire clip to avoid cutting any existing wires. Observe – When the load resistor is in use, it becomes extremely hot; therefore, it should be installed on a metal surface. To avoid melting, do not mount on a plastic surface, a hose, or a painted surface.
Controls the flow of current - The current flow in electrical circuits will be controlled by 3 Ohm 50W Led Load Resistors. It will add a certain amount of resistance to your led lights in order for them to work properly.
TOP 14
HUIQAIDS T10 194 168 LED Turn Signal CANBUS Error Free Load Resistor
HUIQIAODS
194 bulb socket with mount
Our Score
Product Features
The T10 SMD Bulbs will take the place of the following: W5W, 912, 921, 2825, 158, 168, 194, W5W, 912, 921, and so on
Led Decoder Warning Cancellor T10/T15 Error Free (Load Resistor Built In)
Fixing Led/Hid Blinking In Sign Light Bulbs, One Load Resistor Required For Each Turn Signal Bulb/Compact Design For Easy Installation
Please note the following disclaimer: Certain car models require different types of resistors/cancellers, so we can't guarantee that it will fix all flickering issues. If you have any problems, please contact us for assistance.
In this case, For European vehicles such as Audi, BMW, Mercedes, and Porsche, solve LED-related turn signal problems such as hyper flashing or burned-out bulb indicators.
TOP 15
Motorcycle Resistor, Indicator Resistor, Turn Signal Load Decoder
Yosoo Health Gear
0.12 pounds
Our Score
Product Features
To fix the problem with the turn signal, follow these steps. This Decoder Resistor Can Help Solve Led Turn Signal Issues Like Excessive Flashing, No Flashing, Or Lamp Burnout Indication, Fix The Flashlight Flashing Error, And Reduce The Voltage To An Appropriate Level
Decoder for the turn signal: This Decoder Resistor Is Mostly Used For Most Motorcycles' Led Turn Signal Indicators.
Parameters for work: The resistor in this decoder has a voltage of 12V and a power of 10W. A single resistor is 53 Mm/2 in length (not including the wire). 08 Inches
Adaptable Use: This Decoder contains a pair of resistors, and each led turn signal requires one or more resistors, depending on the original power source and other accessories installed.
Material that is long lasting: This Decoder Resistor Is Made Of High-Quality Materials. Materials that are of high quality, durable, and can be used for a long time.
TOP 16
HUIQIAODS H11 H8 H9 880 881 Wire Harness Kit 50W 6Ohm LED Load Resistor Fix Hyper Flashing Blinking Canbus Error Warning Canceller Fit Upgrading LED H...
HUIQIAODS
50W 6Ohm Error Free
Our Score
Product Features
After Installing SMD Led Light Bulb And Fast Turn Signal Blinking Response To Solve "Bulb Out Signal" / "Obc Error Message" After Installing SMD Led Light Bulb And Fast Turn Signal Blinking Response
To Solve Common Turn Signal Problems Associated With Led Bulb Upgrades, 2Pcs 50W 6Ohm Led Load Resistor For Headlight Bulb Fog Lamp Turn Signal Light Daytime Running Light
To eliminate Hyper-Error Indications, it imitates traditional filament bulbs. Burnt Out Bulb or Flash (Quick Blinking)
When resistors are in use, they become very hot. They should be mounted on metal in a secure location away from critical wiring.
Removes Obc And Can- When Led Bulbs Are Installed, There Are Warning Errors On The Dashboard
TOP 17
mankk 1 Pair LED Resistor Kit 3157 4157 50W 6 Ohm Turn Signal Bulb Relay Harness Resistor Adapter Fix Flashing Error Code Warning Canceller
mankk
Our Score
Product Features
The Performance Of The Material The product's shell is made of aluminum, which has excellent heat dissipation properties. all- Without the need for retrofitting, one design allows you to plug and play. One resistor is required for each LED bulb installation, which solves the problem of LED bulbs hyper flashing or the turn signal lamp not flashing, as well as the indicator lamp and license plate lamp errors.
Name: Led Resistor Kit for Heavy Duty
Dimensions of the product Sizes For Which A Load Resistor Is Compatible: (Please order the correct size for your needs.) 3157,4157 Resistor: 50W 6 Ohm
Package: Led Resistor Kits in a Pair
Range of applications: Halogen/Incandescent Front Rear Turn Signal Blinker Light, Reversing Lights, Brake Stop Tail Light Upgrading Led Bulbs are all compatible with these products.
TOP 18
KATUR 4pcs 50W 8ohm LED Load Resistors
KATUR
Our Score
Product Features
When in use, load resistors heat up like light bulbs and become extremely hot. Install them on a metal surface rather than a plastic one. As a result, don't touch it directly with your hand.
4 x 50 W 8 Ohm Load Resistors 8 x Quick Wire Clips
It can be connected across the turn signal bulbs or license plate lights to simulate the load of a regular filament bulb on any vehicle.
Please look for item X00 if you require this Differnet Standard Sokcet.
TOP 19
AUDEXEN 50W 6ohm Load Resistors
AUDEXEN
Our Score
Product Features
[Notice!! ] Resistors should be kept away from plastic parts. Load Resistors heat up like light bulbs and become extremely hot during operation, causing nearby plastic parts to melt, so they must be mounted on a metal surface with screws (not included) and away from any wires or plastic. When the led light is turned on, do not touch it.
Prevent Turn Signal / Led Bulb / Led License Plate Lights From Blinking Too Fast, Hyper Flashing, Error Code, Malfunction, Or Trigger Warning Message On Dashboard. Obc Error Message / Bulb Out Signal After Installing SMD Led Light Bulb.
[Notice] Resistors become extremely hot when they are in use; keep them away from wires and plastic parts. (If you are concerned about this situation, please do not order this load resistor.)
If You Have Encountered The Following Problem: [For Audexen's Customers] If You Have Encountered The Following Problem: "Not Compatible With Your Vehicle" "Wrong Size" "Missing Part" "Defective Item" If You Are Not Satisfied With Our 50W 6Ohm Load Resistors, Just Find Order Details And Contact Seller, We Can Help!
The wires can be connected using the provided quick wire clip (which is quick but not solid). Alternatively, you can cut the wires and connect them more firmly. For the most part, each resistor is for each turn signal or license plate light bulb.
Top Picks
Most Popular
Related