19 Of Best Automotive Replacement Differential Rings Pinions In 2024
TOP 1
Yukon Gear & Axle High Performance Ring & Pinion Gear Set
Yukon Gear & Axle
YG GM8.5-373
16.00 x 12.00 x 6.00 inches
17.71 pounds
Our Score
Product Features
It Doesn't Matter If You're On The Street, Off-The-Street, Or Whether you're on the road or on the racetrack, Yukon Ring And Pinion Sets Provide Unparalleled Quality And Performance
Yukon Ring And Pinion Sets Provide You With The Peace Of Mind That Your Running Gear Is Built To Withstand The Most Severe Conditions.
Yukon Makes Quiet Running Gear That Is Strong And Easy To Set Up Using The Most Up-To-Date Designs And Manufacturing Technologies.
On the pinion of this gear set is an Abs provision; This item is used in a three-step process. 73 Ratio
Gm 8 is compatible. 5" And 8.
Fit Type: Specific to the vehicle
A One-Year Warranty Is Included With Every Yukon Ring And Pinion Set. Year
The diameter of the ring gear is 50 inches.
Pinion with 30 spline
73 Ratio
Bolts for the Ring Gear
TOP 2
USA Standard Gear Ring & Pinion Gear Set
USA Standard Gear
ZG GM8.5-373
16.00 x 12.00 x 6.00 inches
17.71 pounds
Our Score
Product Features
Usa Standard Gear carries a wide range of ring and pinion sets for a wide range of applications, both common and uncommon.
Standard Ring And Pinion Sets From The United States Are The Best Option For Adding Confidence To Your Install.
On their ring and pinion sets, USA Standard Gear provides a one-year warranty against defects.
This item is used in a three-step process. Ratio of 73 Axles
12 Bolts for the Ring Gear
TOP 3
Yukon Gear & Axle YG GM8.5-342 3.42 Ratio Ring & Pinion Gear Set
Yukon Gear & Axle
YG GM8.5-342
16.00 x 12.00 x 6.00 inches
17.55 pounds
Our Score
Product Features
Ring and Pinion Set with a 42-Ratio Ratio
Gm 8. 5" / 8.
Yukon Makes Quiet Running Gear That Is Strong And Easy To Set Up Using The Most Up-To-Date Designs And Manufacturing Technologies.
On the pinion of this gear set, there is an ABS provision.
A One-Year Warranty Is Included With Every Yukon Ring And Pinion Set. Year
TOP 4
OCTOPUS HONDA TRX 300 FW 4x4 2x4 ATV Fourtrax Rear Differential Ring & Pinion Gear Bearing & Seal kit 88-00 Nut Tool TRX300FW Four Trax Gears
OCTOPUS
146677
Our Score
Product Features
Type(S) of Bearing: Bearings that have been left open Full Metal Construction Is Designed To Outlast Original Equipment Manufacturer Parts.
1 Pinion Gear Set / 2 Pinion Bearings / 1 Needle Bearing / 4 Bearing Seals / 3 Gasket O Rings / 1 - Needle Bearing / 1 - Needle Bearing / 1 - Needle Bearing / 1 - Needle Bearing / 1 - Needle Bearing / 1 - Needle Bearing / 1 Shaft of the Pinion
Our number one priority is to provide dependable customer service. We at Octopus are happy to provide a 30-day money-back guarantee. Money-back guarantee of one day and a 90-day money-back guarantee are both included. Manufacturer's warranty is for a period of one day only. Manufacturing Errors are covered by this policy. We recommend using grease or oil instead of canned lubricant for the best results.
To Make Sure Our Parts Are Compatible With Your Component(S), Check Out Our Compatibility List Below. If you have any compatibility concerns, please do not hesitate to contact us.
TOP 5
Yukon Gear & Axle High Performance Ring & Pinion Gear Set
Yukon Gear
YG D44JK-488RUB
16.00 x 12.00 x 6.00 inches
16.03 pounds
Our Score
Product Features
It Doesn't Matter If You're On The Street, Off-The-Street, Or Whether you're on the road or on the racetrack, Yukon Ring And Pinion Sets Provide Unparalleled Quality And Performance
Yukon Ring And Pinion Sets Provide You With The Peace Of Mind That Your Running Gear Is Built To Withstand The Most Severe Conditions.
Yukon Makes Quiet Running Gear That Is Strong And Easy To Set Up Using The Most Up-To-Date Designs And Manufacturing Technologies.
This product is used in a number of different ways. 88 Axle Ratio is a ratio of the number of axles in a vehicle.
A One-Year Warranty Is Included With Every Yukon Ring And Pinion Set. Warranty of one year
Fit Type: Specific to the vehicle
TOP 6
Ford Racing M420988410 8.8" 4.10 Ring and Pinion
Ford
M-4209-88410
15.00 x 11.50 x 5.50 inches
18.60 pounds
Our Score
Product Features
Weight of the Item Package: Weight: 879 kg
Package Dimensions of the Item: 116 cm long by 8 cm wide 636 cm x 13 cm x 636 cm x 12 cm x 12 cm x 12 cm 462 Cm H
Type of product: auto Part
Origin: United States China
TOP 7
GM 14 BOLT PINION GUARD
Barnes 4WD
8.00 x 7.00 x 6.00 inches
Our Score
Product Features
This product, the Barnes 4WD Gm 14 Bolt Pinion Skid, is designed to keep you from having to call it a weekend of wheeling prematurely. The majority of the time, when you get your pinion U-shaped, On a rock, place the joint yoke and then turn it once the U-shape has been achieved. Joint has had it, and your forward momentum has as well.
Have you ever heard the phrase "An ounce of prevention is worth a pound of cure"? So, I'd like to introduce you to 8 Pounds Of Prevention!
The Barnes 4WD 14 Bolt Skid is made of 3/8" plate that has been laser cut. This Pinion Guard Has The Highest Ground Clearance On The Market, And It Comes With Mounting Hardware.
Now you can ride with confidence, knowing that one of your rig's most vulnerable areas is protected from the most dangerous rocks.
TOP 8
Ford Racing Ring and Pinion Installation Kit
Ford
M-4210-B2
11.00 x 12.00 x 3.00 inches
5.95 pounds
Our Score
Product Features
Weight of the Item Package: 95 Pounds
Type of product: auto Part
Package Dimensions of the Item: L: 496 cm x 30 cm x 30 cm x 30 cm x 30 cm x 30 cm 226 cm x 8 cm x 226 cm x 226 cm x 226 cm x 2 636 Cm H
Origin: United States United States of America
TOP 9
LKONWEE Pinion Flange Holding Tool Yoke Wrench
LKONWEE
Our Score
Product Features
Steel with a thickness of 3/8 inch can handle the massive torque required for this job! Bend - The Other Guy Flimsy is what Ratech and Allstar are made of. 250 Inch
Fits Ford's Most Popular Model, the 8. Flange #8 - Ratech and Allstar Tool don't work together!
It's Time to Replace That Leaky Pinion Seal / Gasket. When removing or installing a nut, it keeps your pinion yoke or flange in place.
Number of Pieces: Ywr-
Fit Type: Universal
Designed to work with 1/2-inch and 3/4-inch drives, as well as a tang to allow a common piece of 1-inch to be used. As a handle, you'll need a 125-inch tube or pipe. 1/2 Inch - Included Puller Tool for 20 Threaded Pinion Shafts
Even larger impact sockets can pass through to the nut thanks to the 125-inch opening.
TOP 10
Bentolin Pinion Flange Holding Tool Holder Yoke Wrench
Bentolin
Our Score
Product Features
[Function] Used to fix the yoke over the shoulder or flange when removing or installing the stubby pinion nut, as well as to set bearing pre-load. Load. Other high-torque tasks, such as crushing sleeves, can be handled by it as well.
Our Pinion Flange Holding Tool is compatible with a variety of styles of yokes, flanges, axles, and transfer cases. For 1/4", 5/16", and 3/8" fasteners, there are a variety of slotted bolt patterns.
[Package Contents] 1 Set Pinion Yoke Wrench Tool,If You Have Any Issues With Our Products, Please Contact Us and We Will Resolve The Issue As Soon As Possible.
[Material] This Yoke Wrench Can Handle Huge Torque Values And Can Easily Bend Inferior Tools Because It Is Made Of Huge 3/8 Inch Thick Steel And Laser Cut
[Easy To Install] The Pinion Yoke Wrench's Hole Is Over 2" In Diameter And Fits Most Sockets. Leverage can be made out of a 1/2" breaker bar or a 3/4" pipe.
TOP 11
ExCel XL-1033-1 Ring and Pinion Install Kit
Excel
XL-1033-1
15.25 x 11.13 x 3.25 inches
6.63 pounds
Our Score
Product Features
Dimensions of the package 2 H X 4. 6 L X 28. (Centimetres) 2 W
Engineered For A Faster And More Reliable Performance
Weight of the package Kilograms 016
Origin: United States China
TOP 12
Allstar ALL68611 Ring and Pinion Shim Kit
Allstar
ALL68611
142.80 x 133.20 x 24.00 inches
Our Score
Product Features
One Complete Kit Is Available For Purchase
With The Support Of A 90-Day Money-Back Guarantee Factory Limited to One Day
This is a complete kit that includes all of the difficult-to-find items. Individual Parts Can Be Found For A Quick, Trouble-Free Repair Installation is free of charge.
Fits Ford 9" 'Pig' Differentials with Lm102910/Lm603011 Side Bearings (2. 3 Inch (893 Inch) 032 Inch/062 Inch 250-inch bearings) and 28- or 31-inch bearings Axles with Splines
TOP 13
Ford Racing M420988373 8.8" 3.73 Ring and Pinion
Ford
M-4209-88373
17.57 x 6.45 x 4.21 inches
18.50 pounds
Our Score
Product Features
The Ford Pinion Nut and Ford Crush Sleeve are included.
Original Equipment Manufacturer Quality: The Strongest And Quietest 8 Is Made With Superior Surface Finish, Hardening, And Manufacturing Consistency. There are 8" gears on the market.
Nobody is capable of doing it. 8" Gears are superior to Ford Racing. stronger as well as quieter!
The Sterling Axle Plant at Ford is located in the United States.
Any Ford 8 will fit. Until 2014, there will be an 8" rear end. Doesn't Fit the Year 2015
TOP 14
EXCel F9456 Ring and Pinion
Richmond
F9456
15.00 x 11.00 x 5.25 inches
19.00 pounds
Our Score
Product Features
Richmond Gear is the manufacturer of this item.
Excel Pinion And Ring
Use Richmond Gear Synthetic Gear Oil for the best protection and performance.
Before you begin assembling the parts, make sure they are all clean.
TOP 15
Motive Gear GM7.5-410 Ring and Pinion
Motive Gear
GM7.5-410
15.50 x 11.00 x 5.25 inches
11.93 pounds
Our Score
Product Features
Every Motive Gear Ring And Pinion Is Engineered To The Highest Standards And Is Subjected To Strict Quality Control Procedures In Our In-House Manufacturing Facility. House Lab
Experienced installers are familiar with Motive Gear and know that we provide the best quality and value for OEM replacement rings and pinions.
Whether it's on the street or off, Road Use
Ratio:
TOP 16
Dana 60 Ring and Pinion Gear
QP
Our Score
Product Features
Pinion with 29 spline
Heat - 8620 Material that has undergone some treatment
Typical Rotation
Workmanship Defects are covered for a year.
TOP 17
Massive Pinion Flange Holding Tool Holder Yoke Wrench Made USA
Massive Speed System
MATO'9524.V2
Our Score
Product Features
Steel with a thickness of 3/8" can handle the massive torque required for this job! Bend - The Other Guy Flimsy is what Ratech and Allstar are made of. 250"
Fits Ford's Most Popular Model, the 8. Flange #8 - Ratech and Allstar Tool don't work together!
For the year 2020, something new has been added. Version 2 of the project. More powerful - More adaptable!
Included is a tube tang that allows you to use a standard 1" tube or pipe as a handle!
TOP 18
Yukon High Performance Ring & Pinion Gear Set
Yukon Gear & Axle
YG GM8.5-390
16.00 x 12.00 x 6.00 inches
18.16 pounds
Our Score
Product Features
Gm 8 is compatible. 5" And 8.
The diameter of the ring gear is 50 inches.
Pinion with 30 spline
TOP 19
Belltech 4974 Pinion Shim Set
Belltech
4974
3.00 x 3.00 x 3.00 inches
0.40 pounds
Our Score
Product Features
Our Pinion Shims are the answer if you need more adjustment to get the right rear driveline angles.
Belltech Alignment Kits are the answer to all of your alignment problems.
Original Equipment Manufacturer (OEM) Ride Quality With Improved Control, Performance, And Comfort
Top Picks
Most Popular
Related