25 Of Best Automotive Replacement Flashers In 2024

It can fix problems with led turn signals like rapid flashing, not flashing, hyper flashing, or a dashboard warning of a bulb burnt out.

The following are the measurements: 30 mm x 30 mm x 30 mm/1. 2" X 1. 2" X 1. 2" x 2" x 2" x 2" x 2" x 2" x 2

Contents of the package: 1 x 3 Pin Flasher for Turn Signals

Circuits - Solid State 240 Watts (120 Watts per channel) Heavy Duty Flasher Relay, Max Load 10 Strong Amps

Flashing Safety Alert - 36 Programmable, One-of-a-Kind Light Patterns, Built-in LEDs

Compatible with All Lights - It's compatible with headlights and LEDs.

Materials that are tough to work with – Water Proof 100 % Uses 12 volts to operate - Powered by 24 volts and capable of withstanding any weather conditions.

Control Module for the Lighting

Tridon is a brand of tridon.

2 Terminals / Aluminum Round

From 27 to 14 amps

Flashes per minute range from 60 to 120.

Dot Compliant (40 Life Hours)

Manufacturer of Original Equipment (Oe) with Proven Reliability

5 lb. | Heavy Duty Electronic Flasher, Prong, Square Plastic | 12V | 162W | 0. 12A | 600 Life Hours | Long Lasting

Incandescent Bulbs are compatible with this fixture. The presence of an incandescent light bulb is required for operation; Load Range Variable 0. 27A to 12A Self-Assessment Getting Used To The Draw Of The Lamp Use the Ef27L Flasher if you want to use LEDs.

Cec Lighting Products Meet Or Exceed Sae Standards And Are Dot Compliant.

Providing High-Quality, Dependable, and Long-Lasting Products

For the original factory component on your Gm vehicle, this is a recommended replacement part.

Dimensions of the package 588 H X 13 W X 588 H X 13 W X 5 The dimensions are 462 L X 10 W. (In Centimeters) 414 W

There is no need for any additional wiring or modifications.

12 volts, 2 prongs

Contents of the package: 1 x Turn Signal Flasher (2 pins)

It can fix problems with led turn signals like rapid flashing, no flashing, hyper flashing, or a dashboard warning of a bulb burnt out.

It runs on 12 volts and has a simple plug-in design. Installation of the Play

Hyper Flash Problems Can Be Solved With A Led Electronic Flasher Relay For Turn Signal Blinker Lights

4L3Z 13350-4671 714Ab, 4671 714Ac, 4713 484, 4760 060, 4L3Z 13350-4671 714Ab, 4671 714Ac, 4713 484, 4760 060, 4L3Z 13350-4671 Aa, 5266 169, 5600 0903, 5600 7370, 5600 9339, 5602 1321, 5602 1551, 5602 1915Aa, 5C3Z 13350-Aa, 5C3Z 13350-Aa, 5C3Z 13350-Aa, 5C3Z 13350-Aa, 5C3Z 13350-Aa, 5C3Z 13350-Aa, 5C 5L3Z 13350-Aa, Aa, Aa, Aa, Aa, Aa, Aa 5L5Z 13350-Aa, Aa, Aa, Aa, Aa, Aa, Aa 6011036, 6W7Z 13350-Aa, 6011036, 6W7Z 13350-Aa, 6011036, 6W7 A, 90987- C5Az 13350-02055, 9442495, 9442871, 9442872, 02025, 9442495, 9442871, 9442872, 02025, 9442495, 9442871, 9 13350- B, C6Az B, C6Az B, C6Az B, C6 E8Oy 13350-B, B, B, B, B, B, B, B, B, F4Zz 13350-A, A, A, A, A, A, A, A, A, F4Zz 13350-A, A, A, A, A, A, A, A, A, F58Z 13350-B, F58Z 13350-B, F58Z 13350-B F65Z 13350-A, A, A, A, A, A, A, A, A F67Z 13350-Aa, F67Z 13350-Aa, F67Z 13350-A F67Z 13350-Aa, F67Z 13350-Aa, F67Z 13350-A Ba, J3212067, J3212068, J3226900, Mb305020, Mb337601, Prc 8876, Yl3Z 13350-Ba, J3212067, J3212068, J3226900, Mb305020, Mb337601, Prc 8876, Yl3Z 13350-Ba, J32120 Yu3Z 13350-Aa, Aa, Aa, Aa, Aa, Aa, A Yu3Z 13350-Aa, Aa, Aa, Aa, Aa, Aa, A Ba, Zzm1- 830, Etc

The following are the measurements: 2" X 1. 2" X 1. 5" - Please double-check the size of this flasher relay, as it may be larger than its original counterpart.

Weight of the package 73 Pounds

Dimensions of the package 02 L X1. 83 H X3. (Inches) 09 W

Number of Pieces: Ep35

When Braking: This Small Block Controller Enhances Your Brake Light Function With Two Patterns, 4 times fast blinking, 2. Slow- When the flashing is finished, return to the original steady light.

To Avoid Rear-End Accidents, Improve Traffic Safety Warnings. Put an end to the mishap. When driving in a congested area at night, constant braking causes visual fatigue. This Flasher is an excellent solution to this problem.

12V Boltage with a Wide Boltage 24V DC, Suitable For All Motor Vehicles, Cars, Motorcycles, Tanks, Armored Vehicles, Electric Bicycles, And Other Led Lights, Best Used In Third Brake Lights.

It has a completely sealed technology that makes it waterproof and has a short circuit protection.

Will be able to handle 2 to 6 bulbs

Voltage: 12V

Type of product: assembly of a vehicle light

Our Led Flasher Relay Maintains Flasher Reliability While Also Staying Extra Cool, Consuming Very Little Power, And Having An Extra Long Life.

This is a plug-and-play heavy duty 2 pin 12V LED electronic signal flasher (blinker) relay. To use this flasher, no additional wiring or modifications are required. Completely Waterproof Design, Directly Replaces The Original Oem Two-Piece Set Wire Flasher is a type of wire flasher.

Our Led Flasher Relay with Two Prongs Product Dimensions: 3 X 1. 4 X 1. 3 inches in length 20 amps maximum 12 Volts

Our No-Load Digital Flasher Relay is compatible with both regular and LED bulbs.

[Feature] Adjustable rotation; clockwise flash speed slows, counterclockwise flash speed speeds up; flash frequency ranges from 50 to 200 times per minute.

[High Quality] The Flasher Relay's Shell Is Made Of Flame-Retardant Plastic To Withstand High Temperatures And Wear.

[Quantity] This package contains 5 pieces of 2 pin led flasher relays that can be used to replace your broken or worn out ones.

[Application] The Flasher Relay Is Used To Repair The Hyper Flashing Turn Signal Lights On Motorcycles And Bikes. It Is Specifically Made For Standard Light Bulbs And Led Lamps.

12 Volt LED Compatible Applications

B, E, H, I, and L are the five terminals (B, E, H, I, and L).

wattage: 162 watts / wattage: 13. 5 Amp Max

Used to fix fast/rapid flashing turn signals or prevent weak or non-flashing led blinking issues in cars and motorcycles.

To Prevent Turn Signal Hyper Flashing, Use A Pin Electronic Led Flasher Relay For Motorcycle Or Scooter Use.

Please keep in mind that the LED Flasher Relay isn't designed to solve low-wattage or error-message issues.

1 pcs Led Flasher Relay in the box

Package: A Flasher Relay is included in the package.

Function: The Flasher Relay is used to control the flashing of turn signals on most vehicles, motorcycles, and trucks. It will also assist in the conversion of the old signal bulbs to LED bulbs.

Warranty: Returns are accepted for a period of 30 days, and replacements are available for a period of 365 days.

Specifications include: This Flasher Relay's working voltage is Dc10V- 12V. The maximum power output is 42 watts. Please make sure that the total power of your bulbs is less than 42 watts. In the event that they are exceeded, a load resistor may be required. The flashing frequency ranges from 50 to 200 times per minute.

Weight of the Item Package: Kilograms 023

Origin: United States Japan

Dimensions of the package 048 centimeters long x 5 centimeters wide x 048 centimeters long x 5 W x H = 8 x 11 centimeters 684 centimeters x 684 centimeters x 684 centimeter

Led Tail Lights And Front Turn Signals Compatible With All Vehicles

Circuits that are both solid and tough - Auxiliary Daytime Running Wave Lights Compatible, Heavy Duty 72W Load (36W Per Channel), 12V - 24V.

Notification of an impending emergency Increase the visibility of your car, truck, or motorcycle to keep it safe. Everyone in your immediate vicinity is alarmed. It's Important to Stand Out in Order to Make Your Light Shine Brighter.

On The Road, Make a Statement - Allow your lights to draw the attention of other motorists! Flash Patterns of Alternating Light "Wig Wag"

Our Top Priority Is Security - Led Lights With A Waterproof Design To Avoid Short Circuits

Number of Pieces: Efl1

Origin: United States China

Weight of the package 04 Grams

Frequency that is stable - The High- Quality Led Flasher Modules Can Fix Led Turn Signal Indicator Issues Like Hyper Flashing, Not Flashing, Or Simply Replacing A Failed Relay

3 Pin 12V Automotive Led Flasher Relay For Turn Signals On Motorcycles Or Cars With 0. Led Lights with a Power Consumption of 150 Watts

303030Mm/1 is the size. 2''1. 2''1. 2'', Please Double-Check The Size To Make Sure It Fits, As This Flasher Relay Might Be Larger Than Your OEM

Adjustable Speed - You Can Adjust The Flashing Speed According To The Led Bulb Load By Turning The Knob Clockwise: Faster, Counter Clockwise: Slower.

Enhances Performance

Abrasion and corrosion resistance

Made of High-Quality Materials Materials of the highest standard

Ensures Long-Term Stability

Dc Voltage of Operation 5 To 30V. The maximum current is: 10 Amp. Maximum load: 300 watts at 30 volts dc, 120 watts at 12 volts dc. (Note: This product does not require any additional steps. Up, Step- Only For Dc Loads, Down Or Inverter Function)

The On And Off Durations Can Be Adjusted Separately On This Simple And Practical Blinking Flasher Module. The Blinking Flasher Module is designed to work with both resistive and inductive loads. This Blinking Flasher Module Is Perfect For Using With Led Lamps, Hazard Lights, Warning Signs, Safety Beacons, and Dc Light Bulbs, To Name A Few.

Two Precise 25-Mile Distances You can easily adjust the on and off time by turning adjustable potentiometers with a screwdriver. The output status is indicated by a led.

Activation Time 0 Time-Off 0 And 01 To 15 Seconds Adjustable from 1 to 15 seconds. On the Output - Off - Alternates between on and off cycles.

2 Flashing Options: When braking, this Brake Light Flash Module can quickly blink four times and then slowly blink four times. When you stop with a catchy blinking light, blink four times and then return to the original steady light. This can warn your following drivers.

What You'll Get: The package includes four flash strobe controllers and four double-sided adhesive tapes that can alert vehicles behind you to come to a halt in order to avoid rear-end collisions. When Driving on Blocked Roads, Avoid Accidents; It's also a good idea to send them to your friends and family members.

A Broad Range Of Applications: These Car Brake Light Flashers Can Improve Your Brake Light Function, Are Necessary Aids In Your Daily Life, And Can Be Widely Applied To All Types Of Car Brake Lights With 12 To 30 V, Such As Cars, Trucks, Motorcycles, Electric Bicycles, And More.

Installing it is simple. The Flash Module is approximately 4 inches long and wide. 8 X 2. 7 X 1. 4 Cm/ 1. 89 X 1. 06 X 0. 55 inches x 15 centimeters x 5 centimeters = 55 inches x 15 centimeter Wire length is 9 inches, and it comes with double-sided adhesive tapes for simple installation. It's as simple as connecting the red wire to the positive pole and the black wire to the negative pole, and it's recommended that it be installed in the third brake light.

With A Simple Plug And Play Installation, Designed For Various Cadillac, Chevrolet, GMC, And Oldsmobile Vehicles From 1996 To 2005

The following are the measurements: 2" X 1. 2" X 1. 5" x 12 V

[Application] This application is for a two-person team. Pin Electronic Led Flasher Relay For Most Motorcycles/Bikes To Fix Led Bulbs Related Turn Signal Light Flashing, Not Working Properly Issues

[Speed Adjustable] This Led Flasher Relay Corrects Motorcycle Turn Signal Hyper Flash By Allowing The Led Light To Blink At A Normal Rate, Clockwise Slower, Counter Clockwise Faster. The frequency with which the light flashes is referred to as the "flashing From 50 to 200 repetitions per minute are possible.

[Specification] 2 Pin Blinker Relay Voltage to be used: 12V (11V- 15V). Power to the maximum: 42W. Switch on the power: The current ranges from 02 to 12 volts. Temperature at Work: Temperatures range from 40 to 80 degrees Celsius.

This Turn Signal Flasher Relay is a plug-and-play device. And- Play. Work to directly replace the majority of standard factory components 2- Pin Flasher is a device that allows you to quickly change the color To install the load resistors, there is no need to tap wires.