24 Of Best Automotive Replacement Manual Mainshaft Pilot Bearings In 2024
TOP 1
Sealed Power 4290M Crankshaft Main Bearing Main
Sealed Power
4290M
6.80 x 5.10 x 2.10 inches
5.00 pounds
Our Score
Product Features
Weight of the package 619 pounds
Dimensions of the package 5 H X 5. 8 L X 13. 6 watts (in centimeters)
Origin: United States Mexico
TOP 2
Timken 306SS Pilot Bearing
TIMKEN
306SS
Our Score
Product Features
Reduces the amount of energy used
Long-term durability is ensured.
World-class manufacturing techniques were used to create this product. Standards for each class
Performance And Quality At The Highest Levels
Original Equipment Manufacturer's Quality
TOP 3
National 470358 Oil Seal
National
470358
Our Score
Product Features
Range of temperatures: -40°F to 225°F / -40°F to 225°F The temperature ranges from 40 to 107 degrees Fahrenheit.
Type of Design: Spring is in full swing; Multi-
Hydrocarbon Fluids Have a Low Swell
Low-temperature capability is good.
For any type of repair, it provides quality and dependable service.
TOP 4
Manual Transmission Main Shaft Bearing
MyParts
Our Score
Product Features
Using the most up-to-date software and modern tooling, this product was created.
Additional Note = With Slip Yoke Transfer Case Output: Position = Rear Additional Note = With Slip Yoke Transfer Case Output:
Dimensions are the same as those of the original equipment manufacturer's part.
Installs in the same manner as a factory-installed unit.
Replacement part that fits right in
TOP 5
Premium Manual Transmission Main Shaft Bearing-Output Shaft Bearing
MyParts
Our Score
Product Features
Using the most up-to-date software and modern tooling, this product was created.
Front Inner 4WD 2 Speed Replacement Transfer Case Output Shaft Bearing With Isuzu Msg- |Quantity Required Per Vehicle: Tc Transfer Case With Part Time 4WD |
Dimensions are the same as those of the original equipment manufacturer's part.
Installs in the same manner as a factory-installed unit.
Replacement part that fits right in
TOP 6
Manual Transmission Bearing-Transmission Bearing Compatible
MyParts
Our Score
Product Features
Part Number for Interchange: 1458Jm511946, 149525, 2P8987, 027092223, 13H6552, 1458Jm511946, 149525, 2P8987
Spicer Cm6052A Manual Trans Bearing Replacement Rear 5 Speed Trans Spicer Cm6052A Trans Spicer Cm6052A Trans Spicer Cm6052A Trans Spicer C |Amount Required Per Vehicle:
Dimensions are the same as those of the original equipment manufacturer's part.
Installs in the same manner as a factory-installed unit.
Replacement part that fits right in
TOP 7
Manual Transmission Countershaft Bearing Compatible
MyParts
Our Score
Product Features
Using the most up-to-date software and modern tooling, this product was created.
Rear Engine Bore Inch = 4, Position = Engine Stroke Inch = 3 in. in. in. in. in. in. in. in. in
Dimensions are the same as those of the original equipment manufacturer's part.
Installs in the same manner as a factory-installed unit.
Replacement part that fits right in
TOP 8
Timken 205SS Pilot Bearing
TIMKEN
205SS
2.30 x 2.30 x 1.00 inches
0.30 pounds
Our Score
Product Features
Reduces the amount of energy used
Long-term durability is ensured.
World-class manufacturing techniques were used to create this product. Standards for each class
Performance And Quality At The Highest Levels
Original Equipment Manufacturer's Quality
TOP 9
Premium Manual Transmission Main Shaft Pilot Bearing-4 Speed Trans
MyParts
Our Score
Product Features
Part Number for Interchange: 1458Jv44-, 040Jv44-1419, 040Jv44-1419, 040Jv44-1419, 1458Jv 1419, 1571Sk, 9759Jv441419, 9759Jv441419, 9759Jv441419, 9759J
4 Speed Muncie Manual Transmission Main Shaft Pilot Bearing Replacement |Amount Required Per Vehicle:
Dimensions are the same as those of the original equipment manufacturer's part.
Installs in the same manner as a factory-installed unit.
Replacement part that fits right in
TOP 10
Manual Transmission Countershaft Bearing-Transmission Countershaft Bearing
MyParts
Our Score
Product Features
Part Number for Interchange: A14, Br14, and Ha- are all numbers that can be used to represent a number of different Pa14, Pta14, and Set14 are the 14th, fourteenth, fourteenth, fourteenth, fourteenth, fourteen
Rear M46 Manual Trans Countershaft Bearing Replacement Mfg Code |Needed Quantity Per Vehicle:
Dimensions are the same as those of the original equipment manufacturer's part.
Installs in the same manner as a factory-installed unit.
Replacement part that fits right in
TOP 11
Manual Transmission Countershaft Thrust Bearing
MyParts
Our Score
Product Features
Part Number for Interchange: 1410-Nta2435, 040Nta2435 66802; 548008, 1458Nta2435; 548008, 1458Nta2435; 548008; 548008, 1458
T4, 3 Speed Trans T8 (Ihc Hws) Replacement Manual Trans Countershaft Thrust Bearing |Amount Required Per Vehicle:
Dimensions are the same as those of the original equipment manufacturer's part.
Installs in the same manner as a factory-installed unit.
Replacement part that fits right in
TOP 12
DiWill Shaft 144-13-11650 1441311650 for Komatsu D65A-8/6
N\C
Komatsu
Our Score
Product Features
Models that can be used: The Komatsu D65A- is a machine that was designed by Komatsu.
Number of Pieces: 144- 1441311650; 11650; 11650; 11650; 11650; 11650; 11650
Warranty: 1 Year.
Tips: Before purchasing items, please compare carefully with photos and check part numbers. If you are unsure whether this part is suitable, please contact us and we will respond as soon as possible.
We Will Ship The Item To You Via Dhl/Fedex/USPS, Which Will Arrive In 5-Days After we ship it to you, it will take 9 days for you to receive it. You Can Buy With Confidence Because the Delivery Time Will Not Be A Month Like It Is Shown On The Internet!
TOP 13
DiWill Bearing 144-13-11240 1441311240 for Komatsu D65A-8
N\C
Komatsu
Our Score
Product Features
Models that can be used: The Komatsu D65A- is a machine that was designed by Komatsu.
Number of Pieces: 144- 1441311240; 11240; 11240; 11240; 11240; 11240; 11240
Warranty: 1 Year.
Tips: Before purchasing items, please compare carefully with photos and check part numbers. If you are unsure whether this part is suitable, please contact us and we will respond as soon as possible.
We Will Ship The Item To You Via Dhl/Fedex/USPS, Which Will Arrive In 5-Days After we ship it to you, it will take 9 days for you to receive it. You Can Buy With Confidence Because the Delivery Time Will Not Be A Month Like It Is Shown On The Internet!
TOP 14
DiWill Bearing 144-13-11161 1441311161 for Komatsu D65A-8
N\C
Komatsu
Our Score
Product Features
Models that can be used: The Komatsu D65A- is a machine that was designed by Komatsu.
Number of Pieces: 144- 11161, 1441311161, 11161, 11161, 11161, 11161
Warranty: 1 Year.
Tips: Before purchasing items, please compare carefully with photos and check part numbers. If you are unsure whether this part is suitable, please contact us and we will respond as soon as possible.
We Will Ship The Item To You Via Dhl/Fedex/USPS, Which Will Arrive In 5-Days After we ship it to you, it will take 9 days for you to receive it. You Can Buy With Confidence Because the Delivery Time Will Not Be A Month Like It Is Shown On The Internet!
TOP 15
Qiilu Transmission Main Counter Shaft Transmission Main Counter Shaft 4‑Gear Replacement
Qiilu
Our Score
Product Features
Exceptional Alternative – The Main Counter Shaft of the Transmission Is Professionally Manufactured With High Precision, And It Can Be Replaced Directly If It Is Old Or Broken.
Application's Scope – The Transmission Main Counter Shaft is built to original specifications and standards, and it replaces Lifan's 125cc Electric Foot Pedal for starting the engine.
Use - With Better Gear Shifting Performance, the Transmission Main Counter Shaft Can Be Used To Upgrade, Replace, And Repair Motorcycles.
Exceptional quality - High performance, wear resistance, corrosion resistance, and a long service life are all characteristics of this product.
Material: Alloy Steel - The Main Counter Shaft of the Transmission is Made of High-Quality Steel. Material is made of high-quality alloy steel, which is both environmentally friendly and long-lasting.
TOP 16
aqxreight Transmission Main Counter Shaft
aqxreight
Our Score
Product Features
High- Material: Steel Alloy of High Quality Made of High-Quality Materials Material is a high-quality steel alloy that is strong and durable, has a high hardness, is difficult to bend and deform, and is resistant to wear. The ability to resist. Weather resistance, corrosion resistance, and a long service life are all advantages of this product.
Models that can be used: High-Quality, Brand New Main Counter Shaft for Lifan 125cc Electric Foot Start Engines of Excellent Quality. Before you place an order, please double-check that the item is compatible.
Use of the Product: The Transmission Main Counter Shaft is made to original specifications and can be used to replace an old or damaged one, giving your car better gear shifting performance.
Outstanding performance: The Main Counter Shaft For The Transmission Is Made By A Professional Factory With Fine Workmanship, High Precision, And Excellent Performance. It Is Reliable To Use After A Thorough Quality Inspection.
Installing Is Simple: Without the use of complicated tools or modifications, the transmission main counter shaft is simple to install. It is strongly suggested that you hire a professional to install your system.
TOP 17
Engine Main Counter Shaft,Transmission Main Counter Shaft 4‑Gear Replacement
Tbest
Our Score
Product Features
[Brilliant Compatibility] Transmission Main Counter Shaft, Replacement For Lifan 125Cc Electric Foot Start Engines, Built To Original Specifications And Standard. It Is Made To Original Factory Specifications And Is Specifically Made For Your Model. Before making a purchase, please double-check the model number.
[Brilliant Compatibility] Transmission Main Counter Shaft, Replacement For Lifan 125Cc Electric Foot Start Engines, Built To Original Specifications And Standard. It Is Made To Original Factory Specifications And Is Specifically Made For Your Model. Before making a purchase, please double-check the model number.
[High Quality Alloy Steel Material] Engine Main Counter Shaft, To Make It More Environmentally Friendly And Durable, High Quality Alloy Steel Material Is Used. With High Performance, Wearproof And Corrosion Resistant, And Long Service Life. Good Quality Not Only Can Provide A Safer Guarantee For Your Life,But Good Materials Can Also Increase Product Life.
[Standard Specification] Ensure that standard specifications are followed and that factory quality control is strictly adhered to. Use Up Powerful, Safe, And Assured Using Strict Quality Standards To Ensure Good Quality
Main Counter Shaft, Professional Manufacturing, High Precision, Direct Replacement For The Old Or Broken One, [Excellent Performance] Without the use of any complicated tools, it is simple to install. Complicated operations are not required. You will save both time and energy by using this method.
[Brilliant Compatibility] Transmission Main Counter Shaft, Replacement For Lifan 125Cc Electric Foot Start Engines, Built To Original Specifications And Standard. It Is Made To Original Factory Specifications And Is Specifically Made For Your Model. Before making a purchase, please double-check the model number.
[Brilliant Compatibility] Transmission Main Counter Shaft, Replacement For Lifan 125Cc Electric Foot Start Engines, Built To Original Specifications And Standard. It Is Made To Original Factory Specifications And Is Specifically Made For Your Model. Before making a purchase, please double-check the model number.
[Brilliant Compatibility] Transmission Main Counter Shaft, Replacement For Lifan 125Cc Electric Foot Start Engines, Built To Original Specifications And Standard. It Is Made To Original Factory Specifications And Is Specifically Made For Your Model. Before making a purchase, please double-check the model number.
[Application] Gear Main Counter Shaft, For Better Gear Shifting Performance, Can Be Used For Upgrade, Replacement, And Repair For Your Motorcycle. Workmanship of the highest caliber, as well as practicality and ease of use. You Will Need It Because It Is Such A Practical Tool.
TOP 18
KOYO Japan Bearing Upper Drive Shaft Yamah 90 HP 3 cyl 1985-08 93332-000U3-00
Koyo
Our Score
Product Features
Produced in Japan
TOP 19
For Komatsu Excavator PC60-7 PC70-7 PC75-1 PC75R-2 PW75-1 Swing Main Shaft Mechanism Slewing Reducer 201-26-71140
N\C
201-26-71140
Our Score
Product Features
Applications include: For Komatsu Pc60 Excavator 7 Pc70- 7 Pc75- 1 Pc75R- 2 Pw75-
Number of Pieces: 201- 71140
TOP 20
KOYO Japan Bearing Upper Drive Shaft 90 HP 3 cyl 1985-08 93332-000U3-00 L44649/10
TOPROL
Our Score
Product Features
L44649/L44610 is a combination of the letters L44649 and the number L
TOP 21
PC120-6 Swing Vertical Shaft
n\c
PC120-6
Our Score
Product Features
Number of Pieces: Pc120-
TOP 22
Disenparts 1011694 Accelerator Bearing Bracket 1017401
Disenparts
Gas/Electric Golf Cart 1981-2011
0.42 pounds
Our Score
Product Features
Compatible with the Club Car Ds Gas/Electric Golf Cart from 1981 to the present. 2011
Number of Pieces: 1011694; 1017401; 1011694; 1017401; 1011694
Included in the package are: Bracket for Accelerator Bearing X 1
It's a replacement part, not an original, but it might be useful to you.
Long Working Life and High Performance
TOP 23
Weelparz 1017401 Accelerator Bearing Bracket 1011694
Weelparz
Gas/Electric Golf Cart 1981-2011
0.42 pounds
Our Score
Product Features
Compatible with the Club Car Ds Gas/Electric Golf Cart from 1981 to the present.
Number of Pieces: 1017401 1011694 1017401 1011694 1017401 1011694 10
Included in the package are: Bracket for Accelerator Bearing X 1
It's a replacement part, not an original, but it might be useful to you.
100% Tested Prior To Shipping To Ensure Product Safety , Stability , And Durability
TOP 24
Compatible with Porsche 911 Manual Transmission Main Shaft Bearing
MyParts
Our Score
Product Features
Parts that can be swapped: Oe Supplier (999) 110 117 01
Notes on Vehicle Fitment: Position yourself in the center, behind the 4th gear.
Top Picks
Most Popular
Related