24 Of Best Automotive Replacement Power Steering Return Hoses In 2024
TOP 1
Sunsong 3401143 Power Steering Return Line Hose Assembly
Sunsong
3401143
31.50 x 11.00 x 2.00 inches
Our Score
Product Features
All tubing is made of high-quality steel and electroplated with a zinc coating (chromium III), which provides superior corrosion and rust resistance against elements like high humidity, road salt, water, and grime.
Return Hoses Exceed Original Equipment Performance Standards (Sae J189) And Are Suitable For Low Pressure High Temperature Operations With A Max Working Pressure Of 250 Psi.
Hoses are made of a variety of materials, including rubber, nylon, and polyurethane A Synthetic Rubber Coating That Is Highly Resistant To Oil, Ozone, And Heat Is Layered Over Reinforced Rubber. Hoses can be used in a wide range of temperatures. Exceeding Original Equipment Requirements at temperatures ranging from 40 to 275 degrees Fahrenheit
Fit Type: Specific to the vehicle
Each hose is precision engineered to fit perfectly and includes all of the necessary brackets, grommets, heat shields, bushings, and protective sleeves to ensure that all wearable parts are restored to their original state.
TOP 2
Gates 358980 Power Steering Pressure Line Hose Assembly
Gates
358980
21.00 x 15.00 x 1.50 inches
0.75 pounds
Our Score
Product Features
The Uncoupled End Of The Return Line Assembly Is Connected With Ordinary Worm-Driven Connectors. Clamps for a drive
Comes with everything you need to get started. Pre-installed, Installed, Installed, Installed, Install End fittings, brackets, sensor ports, sheathing, bushings, and grommets that are bent zinc-dichromate plated.
Every individually-packaged item comes with a set of general instructions. Assembly in a Bag
Meets or exceeds the performance requirements of SAE J2050
TOP 3
Rein Automotive PSH0503 Power Steering Return Hose
REIN AUTOMOTIVE
PSH0503
Our Score
Product Features
To ensure trouble-free operation, Rein Power Steering Hoses are designed to be direct replacements. Installation is provided at no cost.
Rein Power Steering Hoses are made with premium Oe quality hose that provides the best protection against premature failures.
To restore your vehicle to safe and optimal performance levels, replace any leaking or otherwise faulty hoses with Rein premium components.
Rein Power Steering Hoses come with all of the necessary hardware and seals for installation, saving you time and money.
Rein's Power Steering Hoses and Assemblies are available for a wide range of vehicles. It is suggested that both the pressure and return hoses be replaced at the same time.
TOP 4
Gates 365453 Power Steering Pressure Line Hose Assembly
Gates
365453
29.00 x 15.00 x 2.00 inches
0.70 pounds
Our Score
Product Features
The Uncoupled End Of The Return Line Assembly Is Connected With Ordinary Worm-Driven Connectors. Clamps for a drive
Comes with everything you need to get started. Pre-installed, Installed, Installed, Installed, Install End fittings, brackets, sensor ports, sheathing, bushings, and grommets that are bent zinc-dichromate plated.
Every individually-packaged item comes with a set of general instructions. Assembly in a Bag
Meets or exceeds the performance requirements of SAE J2050
TOP 5
Rein Automotive PSH0409 Power Steering Return Hose
REIN AUTOMOTIVE
PSH0409
6.50 x 3.50 x 1.50 inches
0.13 pounds
Our Score
Product Features
To ensure trouble-free operation, they've been designed as direct-fit replacements. Installation is provided for free.
Premium Oe Quality Hose Is Used To Provide Maximum Protection Against Premature Failures.
Restores the vehicle's performance to a safe and optimal level.
It's best to replace both the pressure and return hoses at the same time to ensure optimal performance and safety.
To save time and money, complete with hardware and seals when necessary for installation.
TOP 6
Gates 353980 Power Steering Pressure Line Hose Assembly
Gates
353980
Our Score
Product Features
The Uncoupled End Of The Return Line Assembly Is Connected With Ordinary Worm-Driven Connectors. Clamps for a drive
Comes with everything you need to get started. Pre-installed, Installed, Installed, Installed, Install End fittings, brackets, sensor ports, sheathing, bushings, and grommets that are bent zinc-dichromate plated.
Every individually-packaged item comes with a set of general instructions. Assembly in a Bag
Meets or exceeds the performance requirements of SAE J2050
TOP 7
Sunsong 3403685 Power Steering Return Line Hose Assembly
Sunsong
3403685
15.75 x 12.20 x 1.59 inches
Our Score
Product Features
All tubing is made of high-grade steel with a zinc electroplate coating that resists corrosion and rust in the presence of moisture and acidity.
Return Hoses Exceed Original Equipment Performance Standards (Sae J189) And Are Suitable For Low Pressure High Temperature Operations With A Max Working Pressure Of 250 Psi.
Hoses are made of reinforced rubber and have a synthetic rubber coating that is oil, ozone, and heat resistant. The operating temperature of hoses is -. Temperatures range from 40 to 350 degrees Fahrenheit.
To ensure that all wearable parts are restored to their original condition, each hose is precision engineered to the exact form, fit, and function as required.
TOP 8
Edelmann 80473 Steering Return Hose
Plews & Edelmann
80473
12.00 x 9.00 x 1.50 inches
3.88 pounds
Our Score
Product Features
Easy installation, proper hose/tube routing, and leak-free performance are all ensured by OEM fit, form, and function.
Power steering hoses and components from Edelmann Oe are made of long-lasting materials. High-quality and long-lasting Performing Materials That Ensure Durability In The Most Severe Road Conditions
The tubing is coated in a zinc-aluminum alloy with an aluminum-zinc alloy. The couplings and fittings are zinc-plated for rust and corrosion resistance, and the topcoat is a rich epoxy.
Internal oil temperatures of up to 300 degrees Fahrenheit are tolerated by the hose construction, ensuring component integrity in high-temperature applications. High-temperature Operating Environments Under Stress
Male O- 16 mm X 3/8 Inch I. Ring Fitting Hose; Length: 00 Inch Components for Installation Included
TOP 9
Dorman 979-108 Power Steering Return Hose
Dorman
979-108
7.00 x 8.00 x 36.00 inches
0.70 pounds
Our Score
Product Features
Restores the ability to function - If your original hose has failed due to heat or vibration, this is a good replacement.
Direct Substitution – On Specific Vehicles, This Power Steering Return Hose Is Designed To Match The Fit And Function Of The Original Hose.
Quality that can be trusted - With a US-based team of product experts and more than a century of automotive experience
Make sure you're in the right size. Input your vehicle's make, model, and trim level into the Garage Tool to ensure this part fits your specific vehicle.
Construction that is long lasting - To ensure dependable performance and a long service life, this part is made from high-quality materials.
TOP 10
Rein Automotive PSH0407 Power Steering Return Hose
REIN AUTOMOTIVE
PSH0407
9.00 x 4.00 x 1.40 inches
0.18 pounds
Our Score
Product Features
To ensure trouble-free operation, they've been designed as direct-fit replacements. Installation is provided for free.
Premium Oe Quality Hose Is Used To Provide Maximum Protection Against Premature Failures.
Restores the vehicle's performance to a safe and optimal level.
It's best to replace both the pressure and return hoses at the same time to ensure optimal performance and safety.
To save time and money, complete with hardware and seals when necessary for installation.
TOP 11
Gates 363990 Return Line Power Steering Assembly
Gates
363990
0.57 pounds
Our Score
Product Features
The Uncoupled End Of The Return Line Assembly Is Connected With Ordinary Worm-Driven Connectors. Clamps for a drive
Comes with everything you need to get started. Pre-installed, Installed, Installed, Installed, Install End fittings, brackets, sensor ports, sheathing, bushings, and grommets that are bent zinc-dichromate plated.
Every individually-packaged item comes with a set of general instructions. Assembly in a Bag
Meets or exceeds the performance requirements of SAE J2050
TOP 12
Sunsong 3403729 Power Steering Reservoir Hose
Sunsong
3403729
21.00 x 11.00 x 0.90 inches
0.40 pounds
Our Score
Product Features
All tubing is made of high-quality steel and electroplated with a zinc coating (chromium III), which provides superior corrosion and rust resistance against elements such as high humidity, and so on.
Return Hoses Exceed Original Equipment Performance Standards (Sae J189) And Are Suitable For Low Pressure High Temperature Operations With A Max Working Pressure Of 250 Psi.
Hoses can be used in a wide range of temperatures. Exceeding Original Equipment Requirements at temperatures ranging from 40 to 275 degrees Fahrenheit
Hoses are made of a variety of materials, including rubber, nylon, and polyurethane Layers of reinforced rubber are layered on top of a synthetic rubber coating that is oil, ozone, and heat resistant.
Each hose is precision engineered to fit perfectly and includes all of the necessary brackets, grommets, heat shields, bushings, and protective sleeves to ensure that all wearable parts are restored to their original condition.
TOP 13
Gates 350020 Power Steering Bulk Return Line Hose
Gates
350020
Our Score
Product Features
The Uncoupled End Of The Return Line Assembly Is Connected With Ordinary Worm-Driven Connectors. Clamps for a drive
Comes with everything you need to get started. Pre-installed, Installed, Installed, Installed, Install End fittings, brackets, sensor ports, sheathing, bushings, and grommets that are bent zinc-dichromate plated.
Every individually-packaged item comes with a set of general instructions. Assembly in a Bag
Meets or exceeds the performance requirements of SAE J2050
TOP 14
Sunsong 3403921 Power Steering Return Line Hose Assembly
Sunsong
3403921
0.50 pounds
Our Score
Product Features
All tubing is made of high-grade steel with a zinc electroplate coating that resists corrosion and rust in the presence of moisture and acidity.
Return Hoses Exceed Original Equipment Performance Standards (Sae J189) And Are Suitable For Low Pressure High Temperature Operations With A Max Working Pressure Of 250 Psi.
Hoses are made of reinforced rubber and have a synthetic rubber coating that is oil, ozone, and heat resistant. The operating temperature of hoses is -. Temperatures range from 40 to 350 degrees Fahrenheit.
Fit Type: Specific to the vehicle
To ensure that all wearable parts are restored to their original condition, each hose is precision engineered to the exact form, fit, and function as required.
TOP 15
Sunsong 3403835 Power Steering Return Line Hose Assembly
Sunsong
3403835
0.50 pounds
Our Score
Product Features
All tubing is made of high-grade steel with a zinc electroplate coating that resists corrosion and rust in the presence of moisture and acidity.
Return Hoses Exceed Original Equipment Performance Standards (Sae J189) And Are Suitable For Low Pressure High Temperature Operations With A Max Working Pressure Of 250 Psi.
Hoses are made of reinforced rubber and have a synthetic rubber coating that is oil, ozone, and heat resistant. The operating temperature of hoses is -. Temperatures range from 40 to 350 degrees Fahrenheit.
Fit Type: Specific to the vehicle
To ensure that all wearable parts are restored to their original condition, each hose is precision engineered to the exact form, fit, and function as required.
TOP 16
Sunsong 3402968 Power Steering Return Line Hose Assembly
Sunsong
3402968
51.60 x 20.50 x 2.00 inches
0.85 pounds
Our Score
Product Features
All tubing is made of high-grade steel with a zinc electroplate coating that resists corrosion and rust in the presence of moisture and acidity.
Return Hoses Exceed Original Equipment Performance Standards (Sae J189) And Are Suitable For Low Pressure High Temperature Operations With A Max Working Pressure Of 250 Psi.
Hoses are made of reinforced rubber and have a synthetic rubber coating that is oil, ozone, and heat resistant. The operating temperature of hoses is -. Temperatures range from 40 to 350 degrees Fahrenheit.
Fit Type: Specific to the vehicle
To ensure that all wearable parts are restored to their original condition, each hose is precision engineered to the exact form, fit, and function as required.
TOP 17
Sunsong 3404452 Power Steering Reservoir Hose
Sunsong
3404452
Our Score
Product Features
Fit Type: Specific to the vehicle
Return Hoses Exceed Original Equipment Performance Standards And Are Suitable For Low Pressure High Temperature Operations With A Max Working Pressure Of 250 Psi. Each Hose Is Precision Engineered To Exact Fit And Includes Brackets, Grommets, Heat Shields, Bushings, And Protective Sleeves As Required For To Ensure That All Wearable Parts Are Restored To Original Condition; All Tubing Is Manufactured From High Grade Steel And Electroplated With A Zinc Coating Delivering Superior Corrosion And Rust Resistance Against Elements Such As High Humidity, Road Salt, Water, And Grime;
Hose for the Power Steering Reservoir
Weight of the package 6 Pounds
TOP 18
Gates 359970 Power Steering Pressure Line Hose Assembly
Gates
359970
Our Score
Product Features
The Uncoupled End Of The Return Line Assembly Is Connected With Ordinary Worm-Driven Connectors. Clamps for a drive
Comes with everything you need to get started. Pre-installed, Installed, Installed, Installed, Install End fittings, brackets, sensor ports, sheathing, bushings, and grommets that are bent zinc-dichromate plated.
Every individually-packaged item comes with a set of general instructions. Assembly in a Bag
Meets or exceeds the performance requirements of SAE J2050
TOP 19
Gates 350030 Power Steering Bulk Return Line Hose
Gates
350030
12.00 x 12.00 x 4.00 inches
Our Score
Product Features
The Uncoupled End Of The Return Line Assembly Is Connected With Ordinary Worm-Driven Connectors. Clamps for a drive
Comes with everything you need to get started. Pre-installed, Installed, Installed, Installed, Install End fittings, brackets, sensor ports, sheathing, bushings, and grommets that are bent zinc-dichromate plated.
Every individually-packaged item comes with a set of general instructions. Assembly in a Bag
Meets or exceeds the performance requirements of SAE J2050
TOP 20
Sunsong 3404158 Power Steering Return Line Hose Assembly
Sunsong
3404158
0.50 pounds
Our Score
Product Features
All tubing is made of high-grade steel with a zinc electroplate coating that resists corrosion and rust in the presence of moisture and acidity.
Return Hoses Exceed Original Equipment Performance Standards (Sae J189) And Are Suitable For Low Pressure High Temperature Operations With A Max Working Pressure Of 250 Psi.
Hoses are made of reinforced rubber and have a synthetic rubber coating that is oil, ozone, and heat resistant. The operating temperature of hoses is -. Temperatures range from 40 to 350 degrees Fahrenheit.
To ensure that all wearable parts are restored to their original condition, each hose is precision engineered to the exact form, fit, and function as required.
TOP 21
Gates 353800 Power Steering Pressure Line Hose Assembly
Gates
353800
0.80 pounds
Our Score
Product Features
The Uncoupled End Of The Return Line Assembly Is Connected With Ordinary Worm-Driven Connectors. Clamps for a drive
Comes with everything you need to get started. Pre-installed, Installed, Installed, Installed, Install End fittings, brackets, sensor ports, sheathing, bushings, and grommets that are bent zinc-dichromate plated.
Every individually-packaged item comes with a set of general instructions. Assembly in a Bag
Meets or exceeds the performance requirements of SAE J2050
TOP 22
Sunsong 3403852 Power Steering Return Line Hose Assembly
Sunsong
3403852
12.60 x 8.30 x 0.50 inches
0.11 pounds
Our Score
Product Features
All tubing is made of high-grade steel with a zinc electroplate coating that resists corrosion and rust in the presence of moisture and acidity.
Return Hoses Exceed Original Equipment Performance Standards (Sae J189) And Are Suitable For Low Pressure High Temperature Operations With A Max Working Pressure Of 250 Psi.
Hoses are made of reinforced rubber and have a synthetic rubber coating that is oil, ozone, and heat resistant. The operating temperature of hoses is -. Temperatures range from 40 to 350 degrees Fahrenheit.
Fit Type: Specific to the vehicle
To ensure that all wearable parts are restored to their original condition, each hose is precision engineered to the exact form, fit, and function as required.
TOP 23
Gates 363180 Power Steering Pressure Line Hose Assembly
Gates
363180
21.00 x 15.00 x 1.50 inches
Our Score
Product Features
The Uncoupled End Of The Return Line Assembly Is Connected With Ordinary Worm-Driven Connectors. Clamps for a drive
Comes with everything you need to get started. Pre-installed, Installed, Installed, Installed, Install End fittings, brackets, sensor ports, sheathing, bushings, and grommets that are bent zinc-dichromate plated.
Every individually-packaged item comes with a set of general instructions. Assembly in a Bag
Meets or exceeds the performance requirements of SAE J2050
TOP 24
Rein Automotive PSH0505 Power Steering Return Hose
REIN AUTOMOTIVE
PSH0505
0.24 pounds
Our Score
Product Features
To ensure trouble-free operation, Rein Power Steering Hoses are designed to be direct replacements. Installation is provided at no cost.
Rein Power Steering Hoses are made with premium Oe quality hose that provides the best protection against premature failures.
To restore your vehicle to safe and optimal performance levels, replace any leaking or otherwise faulty hoses with Rein premium components.
Rein Power Steering Hoses come with all of the necessary hardware and seals for installation, saving you time and money.
Rein's Power Steering Hoses and Assemblies are available for a wide range of vehicles. It is suggested that both the pressure and return hoses be replaced at the same time.
Top Picks
Most Popular
Related