25 Of Best Boat Engine Fuel Flow Instruments In 2024
TOP 1
Attwood 8889LP6 Acetal 3/8-Inch Barb Fuel Hose Female Tank Fitting
attwood
8889LP6
4.62 x 5.25 x 4.00 inches
0.15 pounds
Our Score
Product Features
3/8 Inch I.D. Installation Made Simple With Barbed Fittings Hose (Interior Diameter) (Hose Clamps Sold Separately)
For dependable performance and peace of mind, this item is made of durable Acetal.
Type of Sport: Fishing
Designed Specifically For Johnson/Evinrude/Omc Engines And Tanks
To: 8883-444444444444444444444444444444
Female Hose
Engines and tanks made by Johnson/Evinrude/Omc are compatible.
Extremely versatile; can be used with leaded, unleaded, or alcohol-based fuels. Fuel that has been blended
Attwood's products are both compatible and dependable, and they're engineered and built to last. With a Failure Attitude
Barb 3/8 Inch
TOP 2
Attwood 8838US6 Universal Male and Female Sprayless Connector
attwood
8838US6
2.00 x 2.00 x 6.50 inches
0.07 pounds
Our Score
Product Features
Male and female universal sprayless connectors are included.
Components that are included: With Thread Sealant, Universal Sprayless Connector
When a female connector is disconnected, a check valve closes automatically.
3/8" and 5/16" fuel lines are compatible.
TOP 3
Attwood 93806UUS7 Marine Boat Fuel Line K
attwood
93806UUS7
2.87 x 7.62 x 12.06 inches
0.63 pounds
Our Score
Product Features
Multi- Low-priced layer 60% More Fuel Output Compared To Competitors Permeation Primer Bulb
The award-winning Universal Sprayless Connector from Attwood is included. When connecting and disconnecting pressurized lines, there will be no more hazardous fuel sprays.
Ethanol Blended Fuels, Universal Brand Engines, and Tanks are all compatible with this product.
Tank Fitting with Male Universal Sprayless Connector (USC)
Includes a 3/8-inch Inch Low- Fuel Permeation Hose That Doesn't Kink or Harden; Temperatures of up to 100 degrees Celsius are possible.
The Fuel Demand Valve is not included in the package.
Engines and tanks from the Universal brand are compatible with this product.
Hose Tank Fitting with Female Universal Sprayless Connector (USC) is included.
Attwood's products are both compatible and dependable, and they're engineered and built to last. With a Failure Attitude
6 Ft. 3/8" Diameter and 3/8" Length
TOP 4
Quicksilver 8M0061875 Primer Bulb with 2 Hose Clamps
Quicksilver
8M0061875
10.75 x 5.25 x 5.25 inches
Our Score
Product Features
Epa-only product Merc- Compliant with Pb15
For use with fuel lines with an inside diameter of 5/16" (8 mm).
Three Low-Cost Layers Rubber With Permeation For Strength, Durability, And Longevity
To temperatures as low as 5 degrees Fahrenheit (-23 degrees Celsius), the material is pliable and functional. 15 degrees Celsius
Hose Clamps are also included.
TOP 5
CPWR-BB-240-33 Water Level Gauge
KUS
JMV00005
0.20 pounds
Our Score
Product Features
The entire gauge has an IP67 protection rating.
Plate on the face Bezel: Black | Color: Backlight is either red or yellow and is made of black plastic.
Voltage Required for Work: 12V or 24V power supply
Signal: 240- Indicating Range: 33 | 33 | Indicating Range: 33 | Indicating Range: Empty- Full
2 1/16 inch or 52 mm mounting size
TOP 6
attwood 9300FDV7 Universal Fuel Demand Valve
attwood
9300FDV7
4.87 x 8.50 x 4.75 inches
0.14 pounds
Our Score
Product Features
Low Vacuum Restriction Ensures Proper Engine Operation At Start-Up And During Use
High- The High-Strength Composite Material Can Handle the Most Harsh Marine Environments
Compatible with 3/8-inch and 5/16-inch fuel hoses, as well as ethanol-blend fuels.
As a result of the pressurized fuel, it prevents engine flooding and fuel spillage.
Installs in the space between the fuel tank and the primer bulb.
All OEM (Original Equipment Manufacturer) Brands are compatible with this product.
3/8" and 5/16" fuel hoses are compatible.
Attwood's products are both compatible and dependable, and they're engineered and built to last. With a Failure Attitude
Only the amount of fuel requested by the engine is allowed, and a pressurized slug of fuel is not allowed to reach the engine.
Maximum Nominal Input Pressure is 20 psi. Protected from a pressure spike of 40 pounds per square inch
TOP 7
Attwood 8896LP6 Acetal 3/8-Inch Barb Fuel Hose Female Tank Fitting
attwood
8896LP6
4.25 x 9.25 x 3.25 inches
0.11 pounds
Our Score
Product Features
Quick- Connect - Installation is a breeze with the inch male thread.
For Reliable Performance and Peace Of Mind, Solid Machined Brass Is Used.
If you're using 8896, you'll want to make sure you have the 6 Fittings for Hose
Yamaha 6Y1 is no longer available. 24305-
TOP 8
Attwood 8899LP6 Mercury Tank Fitting
attwood
8899LP6
2.00 x 2.00 x 5.87 inches
0.25 pounds
Our Score
Product Features
Weight of the package 308 pound weight
Type of product: Fishing_Equipment is a type of fishing equipment that is used to catch fish
Dimensions of the package 953 L X 4 is a four-digit number that represents the length of W X 0 = 572 W X 0. 508 H (Hundredths of a Hundredth of a Thousandth of a Thousandth
Material- Metal
Originating Country: Taiwan
TOP 9
Attwood 93038AI7 Primer Bulb for 3.8 inch ID Fuel Line
attwood
93038I7
8.27 x 1.97 x 1.97 inches
0.11 pounds
Our Score
Product Features
The use of a double check valve ensures that the fuel flow direction is correct and that there is no restriction in the flow.
The Fuel Line Primer Bulb Is Alcohol Resistant And Can Be Used With Both Leaded And Non-Leaded Fuels. Fuels that contain lead. (This product is not intended for use in the United States.)
With a few common tools, you can easily replace old primer bulbs. On barb connectors, hose clamps for the fuel line are required.
Check for leaks, wear, or loss of flexibility in the primer bulb and fuel line on a regular basis. As needed, replace.
Fuel Hose Connectors With Barb Ends Are Included, As Are Stainless Steel Hose Clamps.
TOP 10
Attwood 8838TM6 Universal Sprayless Connector
attwood
8838TM6
9.25 x 4.25 x 3.25 inches
0.30 kilograms
Our Score
Product Features
Engineered to withstand the harsh marine environment, this body is made of high-strength materials.
When connecting or disconnecting fuel fittings, this device replaces traditional tank fittings and eliminates spray.
Pre- Fuel that has been applied Fuel Leaks are Prevented by Using a High-Grade Thread Sealant.
All Epa and Carb Requirements are met.
All standard 1/4" Npt fittings are compatible with this male fitting.
TOP 11
Marine Boat Speedometer Pitot Kit
asdmm
0.15 pounds
Our Score
Product Features
Compatible With The Largest Number Of Mounting Holes
Replacement Pitot Tube for All Brands.
With stable water pressures, accurate readings can be obtained.
All marine pressure driven speedometers up to 80 mph, including Faria and Medallion, can be used.
Kick-Start System: Protect yourself from impact damage by raising your head up.
TOP 12
CPWR-WS-240-33 Water Level Gauge
KUS
JMV00040
0.20 pounds
Our Score
Product Features
The entire gauge has an IP67 protection rating.
Plate on the face Bezel: White | Color: Sues 316 | Led Backlight In Red Or Yellow
Voltage Required for Work: 12V or 24V power supply
Signal: 240- Indicating Range: 33 | 33 | Indicating Range: 33 | Indicating Range: Empty- Full
2 1/16 inch or 52 mm mounting size
TOP 13
Seachoice 15401 Universal Marine Speedometer Pitot Tube
SEACHOICE
15401
4.00 x 2.00 x 9.00 inches
0.11 kilograms
Our Score
Product Features
Construction that is both durable and kick-ass. To Prevent Breakage, There Is A Feature That Allows You To Move Up
Speedometer readings are accurate thanks to the Pitot Tube.
Design that is resistant to weeds
Compatible with the vast majority of speedometers.
Color: White
TOP 14
KUS USA Reed Switch Diesel Fuel Water Level Sensor
KUS
JKS02202
13.00 x 6.00 x 2.50 inches
0.60 pounds
Our Score
Product Features
Method of Fixing: (Not Equidistant) Sae 5 Hole Mounting Pattern
Output of Signal: 240 Ohm Standard American Output - 30 Ohm (Empty - - - - - - - - - Non-Full), Full) 18-inch linear output 21 millimeters per step
How it works: 12 volts/24 volts, volts, volts, volts, Temperatures range from 40 to 185 degrees Fahrenheit (-). (Temperatures range from 40 to 85 degrees Fahrenheit.)
Included: Nbr Mounting Gasket (1 Pc), 10-Piece Sending Unit 5 pcs. hex screws, 1 pc. installation instructions
Suitable for: Oem Replacement, Diesel, Fuel, Gasoline, Water
TOP 15
Shoreline Marine Generation III Johnson Fuel Line Assembly
Shoreline Marine
4012049
10.80 x 6.40 x 2.60 inches
0.95 pounds
Our Score
Product Features
Resistant to Alcohol
Clamp for a hose made of stainless steel
Hose that does not kink
Climate Extremes Have Been Put to the Test
Fuel Hose Made of Composite Materials
TOP 16
Moeller Marine Fuel Tank NPT Connector
Moeller Marine
3001.7991
4.00 x 4.50 x 6.25 inches
0.10 pounds
Our Score
Product Features
The year was 1998
Type of Sport: Boating
Weight of the package 050 pound sterling sterling sterling sterling sterling sterling sterling sterling sterling sterling sterling sterling sterling sterling
Components that are included: Mrcry 98Eng 1/4Npt M Tnk Cnct 1/4Npt M Tnk Cnct 1/4Npt M Tnk Cnct 1/4N
TOP 17
Moeller Marine Fuel Tank NPT Connector
Moeller Marine
033461-10
6.00 x 2.25 x 1.25 inches
0.20 pounds
Our Score
Product Features
Type of Material: Plastic
Threads Into Tank Fuel Withdrawal
Type of Sport: Boating
the name of the substance plastic
TOP 18
Moeller Marine Fuel Tank Three-Way Valve
Moeller Marine
033312-10
8.00 x 6.00 x 4.00 inches
0.55 pounds
Our Score
Product Features
"The Item's Package Height Is 6"
Origin: United States China
Type of Sport: Boating
"The Item's Package Width Is 7.5"
"The item's package length is eight inches."
TOP 19
SEACHOICE 23011 Gas Tank Vent
SEACHOICE
23011
3.75 x 1.50 x 7.00 inches
0.11 kilograms
Our Score
Product Features
For Corrosion Resistance, it is made of chrome-plated zinc.
While filling the tank, it aids in maintaining a proper flow of fuel.
A 5/8-inch vent hose is connected to the integrated hose barb.
Includes a locking nut with a wide flange.
It has a stainless steel finish. Contaminants are blocked by a steel flame-resisting screen.
TOP 20
Acouto Male Fuel Tank Connector 1/4 inch Fuel Tank Male Connector Pipe Joint Fit
Acouto
3.94 x 3.94 x 3.94 inches
Our Score
Product Features
Perfect Compatibility- The Fuel Tank Male Connector Replaces The End Of The Fuel Connectors For Yamaha Outboards, and It Is Also Compatible With Hidea Motors Made In China. Please Be Assured Of Your Purchase Because It Is 100 Brand New.
Outboard Motors by Yamaha-- Fuel Line Connectors For Yamaha Outboard Motors With 6Mm Fuel Tube are part of a motor boat accessory line. The Marine Fuel Tank Connector Is Suitable For 1/4" Hose Line And Is About 7 Inches In Diameter. 1 Cm/2. 8 Inches
Assurance of Quality – High-quality products and services have always been a priority for us as a professional seller. Before leaving the factory, each product must pass a quality inspection. Before making a purchase, please double-check that the product is appropriate. Always, always, always, always, always, always, always, always, always, always
Exceptional Quality- This 1/4" Male Fuel Tank Connector is constructed of high-quality plastic and metal that is resistant to wear. It is resistant and durable, and it is difficult to break. It also has a long service life.
a suitable substitute- The Male Fuel Tank Connector is a direct replacement for the old and broken one and is simple to install. Nice Accessory Sets For Repairing Or Replacing
TOP 21
Attwood 14531-6 Marine Fuel Tank and Hose Fittings
attwood
14531-6
0.24 pounds
Our Score
Product Features
Versatile; Can Be Used With Leaded, Unleaded, and Ethanol-Based Fuels Alcohol-Free And Blended Fuels that have been blended
Die-Cast Durability For a Long-Lasting Zinc-Cast- Long-Term Results
For 3/8 Inch I.D., a standard 1/4 Inch Npt thread with barbed fittings is used. Hose (Dimensions on the Inside)
Designed Specifically For Mercury/Mariner Engines And Tanks
Attwood's products are both compatible and dependable, and they're engineered and built to last. With a Failure Attitude
TOP 22
Sea Dog 352110-1 Gas Tank Vent
Sea Dog
3004.4582
0.63 x 0.43 x 0.15 inches
0.20 pounds
Our Score
Product Features
Each item is sold separately.
Chrome plated die cast zinc.
For a 5/8" hose, use a gas tank vent.
TOP 23
attwood 93806ELP7 Fuel Line Kit —
attwood
3005.0563
8.25 x 12.25 x 8.25 inches
1.04 pounds
Our Score
Product Features
Engines and tanks by Johnson and Evinrude
Original Equipment Replacement that is Reliable
Multi- Low-cost layer The Primer Bulb for Permeation
Not included: Male Universal Sprayless Connector (USC) tank fitting
Two (2) 8889Lp6 Hose Fittings are included for both the tank and engine ends.
There are six in total. Foot- 3/8-inch long Fuel Line Diameter
For Use With 8889Lp6 Engine Fitting
Designed to work with Johnson/Evinrude engines and tanks.
8889Lp6 Hose Tank Fitting (Female) is included.
6 Ft. 3/8" Diameter and 3/8" Length
TOP 24
OEM Evinrude Johnson BRP 5/16" 8' EPA Compliant Hose and Bulb Assembly
Evinrude Johnson
15.00 x 6.00 x 13.00 inches
6.00 pounds
Our Score
Product Features
Sold Each
Sku: 5008609
Please double-check that you are a good fit.
TOP 25
attwood 93806AUS7 Marine Boat Fuel Line K
attwood
93806AUS7
12.50 x 3.00 x 8.62 inches
0.11 pounds
Our Score
Product Features
Multi- Low-priced layer 60% More Fuel Output Compared To Competitors Permeation Primer Bulb
The award-winning Universal Sprayless Connector from Attwood is included. When connecting and disconnecting pressurized lines, there will be no more hazardous fuel sprays.
Tank Fitting with Male Universal Sprayless Connector (USC)
Includes a 3/8-inch Inch Low- Fuel Permeation Hose That Doesn't Kink or Harden; Temperatures of up to 100 degrees Celsius are possible.
For Use With 8893-A Engine Fitting
Pre-assembled for use with Mercury brand engines and tanks 1998
Hose Tank Fitting with Female Universal Sprayless Connector (USC) is included.
Compatible With Ethanol-Blended Fuels And Pre-Moistened Fuels Engines and tanks from the Mercury brand from 1998
Attwood's products are both compatible and dependable, and they're engineered and built to last. With a Failure Attitude
6 Ft. 3/8" Diameter and 3/8" Length
Top Picks
Most Popular
Related