22 Of Best Boat Engine Outboard Motor Brackets In 2024
TOP 1
MotorGuide 8M0120717 Xi Series Quick-Release Mounting Bracket Kit
MotorGuide
8M0120717
Our Score
Product Features
White-finished composite base
With a positive locking mechanism and a low profile design, this is a great option.
Hardware is made of stainless steel and is included in the package.
The Top and Bottom Plates are included in the kit.
Padlock Security Clasp Is Included With The Bracket
TOP 2
Minn Kota 1854036 MKA-16-03 Quick Release Bracket
Minn Kota
Minn
12.50 x 8.50 x 1.50 inches
4.45 pounds
Our Score
Product Features
Allows for the quick removal and reinstallation of the trolling motor on the boat deck.
For a better boat cover fit and more clearance when launching the boat, move the motor inboard 6 inches.
For added security, both the upper and lower plates have a slot for securing with a padlock (not included).
Ulterra, Terrova, Power Drive, Power Drive V2, and Deckhand 40 are all compatible with this product.
Cam- Bracket movement and noise are reduced thanks to the lock design, which comes with stainless steel mounting hardware, a lanyard, and a locking pin.
TOP 3
Minn Kota Bracket & Hinge Assembly 2991815A
Minn Kota
4.00 x 3.00 x 2.00 inches
Our Score
Product Features
(From washer to washer) Max Width 6"
The maximum thickness of the transom is three inches.
2991815A is a 2991815A product.
ABS Plastic is used.
TOP 4
SeaSense Adjustable Motor Support Bracket
SeaSense
SS-SMS-73733
3.50 x 7.00 x 32.25 inches
4.05 pounds
Our Score
Product Features
Dimensions of the item's package: 17 inches long by 17 inches wide The dimensions are 78 W X 10 H. 16 H (Cm)
Origin: United States Taiwan is a Chinese province.
Type of product: Equipment for Fishing
Weight of the Item Package: 2 Pounds
TOP 5
Watersnake Trolling Motor Nylon Quick Release Bracket
Watersnake
JM55007
Our Score
Product Features
Compatible with: It works with both a standard bow mount and a scissor bow mount.
Release Time: Immediately The user can quickly attach or remove a bow mount motor from their boat using this bracket.
Security: For added security, a padlock can also be attached.
Applicability: With the included high quality stainless steel nuts, bolts, washers, and spacers, the Heavy Gauge Bracket has two strong nylon plates that attach to the motor and the other to the craft.
Ease of Operation: The bracket only takes up a small amount of deck space and is designed for easy storage, removal, and installation.
TOP 6
PANTHER MARINE 55-0407AL Lightweight 4-Stroke Bracket
PANTHER MARINE
3005.5104
20.00 x 12.00 x 12.00 inches
18.50 pounds
Our Score
Product Features
You can fine tune the motor height for optimal performance with 10" of travel and 5 vertical running positions.
Designed for 2 people And 4- Motors with a stroke of up to 15 horsepower or 132 pounds are available.
The product complies with the requirements of the Abyc.
If you don't have Panther 55, don't use it. 0415 Safety Cable is included in the package.
TOP 7
SE Sport 200 Hydrofoil, fits 8 hp
Sport Marine Technologies Inc.
Hydrofoil 200
2.00 x 15.00 x 16.00 inches
0.01 pounds
Our Score
Product Features
There is no drag because the trailing edge is downturned and the underside is cupped.
For quick and precise control, a narrow Streamline Shape is used.
Hardware is included with the purchase.
Suitable for an 8 HP engine - Engines with a horsepower of 40
Thrust is improved thanks to the crescent shape and control tips.
TOP 8
Norestar Outboard Boat Motor Bracket/Kicker Mount
Norestar
OBM-20
Our Score
Product Features
It only takes up a small amount of wall space to install - Boats of all sizes and types will benefit from this product.
The outboard motor is locked and held in place by the transom mount, which can be raised or lowered for propulsion.
Vertical Elevation:
Positions of Locking:
Capacity: 110 Lbs
TOP 9
Yamaha Transom Saver Alternative
Motormate
11.50 x 8.00 x 1.50 inches
2.75 pounds
Our Score
Product Features
Yoke: Transom Mount: 7/8" 3/4"
Fits Yamaha 4-cylinder engine 200-yard dash 250Hp Sho
Skylar Hamilton and Alton Jones Sr. have put their trust in us. Terry Scroggins, Takahiro Omori, Terry Scroggins, Terry Scroggins, Terry Scroggins, Terry Scroggins, Terry
Marine-Grade Stainless Steel With a High-Performance Finish Nylon Caps with an Impact
Guaranteed for life
TOP 10
SeaSense Motorbracket 15-20 Hp Outboard Stationary
SeaSense
50072379
18.50 x 5.98 x 3.11 inches
1.46 pounds
Our Score
Product Features
Size of the package: 368 Cm
Length of the package 94 Cm
Type of product: equipment for fishing
Height of the package: 636 Cm
TOP 11
Explore Land Outboard Motor Cover
Explore Land
28.00 x 19.00 x 28.00 inches
1.04 pounds
Our Score
Product Features
Waterproof to the nth degree Excellent For Off-Shore Boating Mooring, Mooring, Mooring, Mooring, Mooring, Seasonal Outdoor High- Double-stitched seams and all seams sealed with tape can help to increase durability. Rain, wind, snow, fog, dust, and scratches are all protected by full coverage.
Material is made of 600D marine grade polyester with a high-quality waterproof undercoating. Fits Most 115-Volt Outboard Motors Cover Size: 28"L X 19"W X 28"H, 225 HP Note: Please Measure Your Motor Diamensions Carefully Before You Buy! This Cover Is An Universal Fit Type, So Don't Just Refer To How Much Horse Power Your Motor Is!
Design Improvements – Velcro on the front side makes it simple to put on and take off. Long-term ventilation was improved by an air vent on the back side. Inside Condensation And Wind Lofting Are Reduced In A Term Storage Situation. Protecting and extending the life of your vehicle all year long.
Locking Systems - There are a variety of locking systems available. Adjustment is made with a heavy duty elastic cord for a snug fit. Quick- Release Buckles and Adjustable Straps in the Front and Back Keep the Cover Securely Fastened, Even in Severe Weather.
Service to Customers – Any Quality Is Covered For 2 Years- A similar problem exists.
TOP 12
MotorMate Yamaha,4-Stroke Motors,fits 115hp
MotorMate
11.50 x 8.00 x 1.50 inches
2.75 pounds
Our Score
Product Features
Marine-Grade Stainless Steel With a High-Performance Finish Nylon Caps with an Impact
Yamaha, 4-piece Saltwater Series, Stroke Motors, 115Hp, Ss Mounting Brackets Included
Guy Eakers, Ott Defoe, and Timmy Horton are among the professionals who swear by it.
Guaranteed for life
TOP 13
Mercury Transom Saver Alternative - 2 Stroke 115-200hp Outboard Motors
Motormate
11.50 x 8.00 x 1.50 inches
2.75 pounds
Our Score
Product Features
Yoke: Transom Mount: 1/8" 7/16"
Fits 150- Optimax 175 hp, 200 hp Carborated 250 hp, EFI 200 hp, Pro Xs 115 hp 175Hp
Guy Eakers, Ott Defoe, and Timmy Horton are among the professionals who swear by it.
Marine-Grade Stainless Steel With a High-Performance Finish Nylon Caps with an Impact
Guaranteed for life
TOP 14
Five Oceans Rail-Mount Outboard Motor Bracket
Five Oceans
1.80 pounds
Our Score
Product Features
It consists of two parts: Clamp Clamp Clamp Clamp Clamp Clamp Clamp Clamp Clamp Clamp Clamp Clamp C Inch (25. 4Mm) O. It has a T rail and can hold outboards up to 80 horsepower.
The Rails of the Five Oceans is a rail system that connects the five ocean The Mount Outboard Bracket keeps your small outboard safe and upright on the stern rail (rather than in a locker where gas from the tank could collect and cause hazardous fumes, or spill and ruin stored goods).
UV - Resistant Polypropylene that has been stabilized to withstand the harsh conditions of the marine environment.
Fits rails with 7/8-inch and 1-inch diameters, as well as rails with 90-degree tee fittings. Four (4) stainless steel fasteners are included as part of the attachment hardware.
Barbecues, downrigger brackets, fish cleaning tables, and other items can be mounted on this platform. For the past 40 years, we've been developing high-quality products across five oceans. Marine Products of Superior Quality
TOP 15
MARINE CITY 304 Stainless-Steel Fine Polished Outboard Motor Bracket Up to 20 HP Easy Use Smooth Design Heavy Duty
MARINE CITY
3.00 x 3.00 x 3.00 inches
Our Score
Product Features
The Construction Is Made Of Stainless Steel, Which Is Non-Toxic. For saltwater use, it is corrosive, extending the life of the product.
It's made of stamped 304 stainless steel with a plastic base and a spring-loaded 4 vertical position adjustable bracket.
With a reinforced welded frame and stamped stainless components, this unit is built to last. For added stability, the track body is wider.
Rating in watts Mounting Size: 8 8-inch x 20-inch x 20-inch x 20-inch x 20-inch x 20 8-inch, 5/8-inch, 5-inch, 5-inch, 5-inch, 5-inch, 5-inch 1/4 *10- Thickness of 3/8" 304 Stainless Steel 2. 5 Mm. Suits 2- Motors with a 7 1/2-inch stroke With a maximum weight of 50 kg (110 lbs), the engine is capable of 20 horsepower.
Stainless springs make it simple to lift and lower the motor, which helps to counterbalance its weight.
TOP 16
Minn Kota 1810302 Talon Sandwich Adapter Bracket
Minn Kota
1810302
30.00 x 13.00 x 6.00 inches
21.00 pounds
Our Score
Product Features
Fit Type: Fits Everyone
TOP 17
PANTHER MARINE 55-0028 Fixed-Mount 4-Stroke Outboard Motor Bracket
PANTHER MARINE
55-0028
11.10 x 9.21 x 3.90 inches
8.50 pounds
Our Score
Product Features
The mounting board is made of a tough polypropylene.
It Can Be Used With Two Or Four People- Motors with a stroke of up to 35 horsepower and a weight of up to 263 pounds are available. Maximum Capacity
To ensure proper installation procedures, refer to the manufacturer's recommendations and guidelines.
Mounting hardware is made of stainless steel, and the safety cable is included.
TOP 18
ISURE MARINRE Aluminium Boat Outboard Motor Bracket Kicker 7.5-20HP Heavy Duty Trolling Yacht
ISURE MARINE
Our Score
Product Features
Mounting board made of solid polypropylene
Material: Constructed from anodized aluminum
A Sturdy Design With A Smooth, Spring-Like Surface With 5 stop locations, the assisted lifting action can be fully adjusted.
Heavy Duty With Reinforced Welded Frame And Stamped Stainless Components, Retractable Bracket For Trolling Auxiliary Motors On Power And Sailboats With Ease
The mounting holes are 100mm across (from center to center) and have multiple vertical holes for various mounting options.
TOP 19
Attwood SP-402 Replacement Bolt On Bracket SP-402
attwood
SP-402
1.50 x 1.50 x 2.48 inches
Our Score
Product Features
When an old bracket becomes damaged or worn out, it is simple to replace it.
Bracket Bolt For Transom Saver Head Replacement
To relieve pressure from the boat transom or engine transom bracket, it helps support the weight of the outboard or stern drive unit when trailering or storing it.
Supports the weight of the outboard or stern drive unit while trailering or storing it, relieving pressure on the boat transom or engine transom bracket.
TOP 20
Marinetech Panther 55-0010 Outboard Motor Bracket
Marinetech
55-0010
19.25 x 9.00 x 8.50 inches
8.80 pounds
Our Score
Product Features
Fits motors with a maximum output of 10 horsepower and a maximum weight of 80 pounds.
TOP 21
X-Haibei Outboard Motor Bracket for Boat Auxilary Up to 10HP Stainless Steel Mounts 4 Stroke
X-Haibei
Our Score
Product Features
Mounting Dimensions: 8 Inch x 8 Inch 625 Inch (Please refer to the images for more information on sizes.)
Rating in watts To 10 Hp
Size of roller: 8 25*10. Inches (375)
If you have any questions, please do not hesitate to contact us.
Material of foundation: Frame: Plastic, Plastic, Plastic, Plastic, Plastic, Plastic, Plastic, Plastic, Plastic steel made of stainless steel
TOP 22
Panther Marine 55-0410 Auxiliary Outboard 4-Stroke Motor Bracket
Marinetech
55-0410
23.74 x 12.24 x 9.49 inches
19.00 pounds
Our Score
Product Features
The anodized aluminum bracket is designed to handle the increased weight and torque output of today's four-stroke engines, whether they have long or short shafts.
For changing water or load conditions, set your trolling or auxiliary motor to one of five vertical running positions.
Up to 35 horsepower and 263 pounds can be handled. Motors With A Travel Of 10"
Fit Type: Universal
Top Picks
Most Popular
Related