20 Of Best Car Floor Jacks In 2024
TOP 1
Powerbuilt 620422E Heavy Duty 4000 lb Triple Lift Jack
Powerbuilt
620422E
17.00 x 27.00 x 8.50 inches
79.20 pounds
Our Score
Product Features
Both a removable lift saddle and padded lift rails are included in the patented design.
This is a long-lasting product.
Both a removable lift saddle and padded lift rails are included in the patented design.
The locking safety bar keeps the jack in place once it's been raised, eliminating the need for jack stands to support a lifted vehicle.
Once raised, the locking safety bar secures the jack in place.
It has a 4,000-pound lifting capacity and meets or exceeds Ansi standards.
A 4,000-pound lifting capacity
The Triple Lift's adaptable design allows it to work with a variety of vehicle frames.
Lifts automobiles, trucks, and ATVs with ease, as well as removing and replacing transmissions and differentials.
TOP 2
BIG RED T83006 Torin Hydraulic Trolley Service/Floor Jack
BIG RED
T83006
36.00 pounds
Our Score
Product Features
With a 3 ton (6,000 pound) capacity and a 5-foot minimum lifting height, this machine is ideal for any job. With a maximum height of 20-inches and a width of 7/8-inches 7/8"; Most cars, trucks, vans, and SUVs are compatible with this product.
Heavy-Duty Steel Is Used To Build The Hydraulic Trolley Floor Jack, Providing Long-Term Durability and An Industrial Luster.
The Jack can be easily raised to the desired height with the help of a single piston quick lift pump. Overheating is avoided with the use of a safety bypass system. Loading And Operation Is Safe. rubber- Tongs with a Tip
Two large steel casters and two 360-degree casters are included in this package. Swivel Casters with a Degree of Swivel for Easy Manoeuvrability; When lifting higher vehicles, the extra long saddle neck saves time. length of the handle: 5 Inch
TOP 3
Blackhawk B6350 Black/Red Fast Lift Service Jack
Blackhawk
B6350
28.50 x 13.75 x 6.50 inches
85.00 pounds
Our Score
Product Features
The Swivel Saddle makes it simple to position the jack and keeps the user safe. diameter of the saddle: 4 Inch
Internal safety valve and vent plug are built-in to ensure safe operation.
For Precise Load Control, Use A Rugged Universal Joint
Note: The Hydraulic Jack Is Designed To Lift, Not To Support The Object; Loads Must Be Supported By A Pair Of Appropriately Rated Jack Stands Immediately After Lifting.
Jack dimensions are 28 1/2" long, 13 3/4" wide, and 6 1/2" tall.
Ideal for garage work as well as other outdoor activities such as picnics and ball games.
7,000 pound per ton Capacity of the Lift
TOP 4
Torin T83505W Blackjack Hydraulic Low Profile Steel Racing Floor Jack
Torin
T83505W
25.20 x 13.50 x 6.90 inches
Our Score
Product Features
Constructed of Long-Lasting, High-Quality Materials Steel of High Tensile; The Jack is equipped with a single piston quick lift pump that makes it simple to raise the jack to the desired height.
The 3 Ton (6,000 Lb) Capacity Racing Floor Jack can be used for general or specialty applications.
Range of Lifting: 3- From 7/10" to 18-tenths of an inch 7/100" Allows For Easy Access In Low-Light Situations Vehicles with a Name
The Foam Bumper On The Handle Assists In The Protection Of Your Vehicle
TOP 5
BIG RED T815016L Torin Hydraulic Low Profile Aluminum and Steel Racing Floor Jack
BIG RED
T815016L
7.00 x 11.25 x 23.50 inches
Our Score
Product Features
Constructed of Long-Lasting, High-Quality Materials Aluminum and steel are both strong materials. It comes with a convenient side handle that makes it easy to carry. It Has A Non-Manufactured, Machined Surface. Handle with Knurled Knurling
The Racing Floor Jack has a 1.25-inch diameter and can be used for general or specialty applications. Capacity: 5 metric tons (3,000 pounds)
The range of lifts starts at 3. You Can Get Easy Access Under Low-Light Conditions If You're 5" to 14" Vehicles with a Name
The Foam Bumper On The Handle Assists In The Protection Of Your Vehicle
TOP 6
Arcan 3 Ton Low Profile Quick Rise Steel Floor Jack
ARCAN
A20002 / XL3000A
6.30 x 29.30 x 13.80 inches
Our Score
Product Features
Lifting Quickly: The Saddle Is Raise To The Load Quickly With Double Pump Pistons
Model numbers are subject to change: A20002 = Xl3000A Xl3000A Xl3000A Xl3000
Seals for wiper blades: Contaminants must be kept out of the hydraulic system.
Side Plates Made of Steel: Side plates made of high carbon steel add to the chassis's strength.
Range of Lifting: 3" To 19. 72"
Simple Maneuvrability: Easy transport is made possible by the wide front wheels and ball bearing-mounted rear casters.
Conforms to ASME Pase- 2019 Safety Standard: To ensure our products are among the safest on the market, we put all of our lifting equipment through voluntary and rigorous third-party safety testing.
Valves For Bypass And Overload: Prevents Overindulgence Extending the use of a hydraulic ram and a jack beyond their rated capacities.
TOP 7
Pittsburgh Automotive 3 Ton Heavy Duty Ultra Low Profile Steel Floor Jack
Pittsburgh Automotive
28.00 x 12.00 x 10.00 inches
Our Score
Product Features
Professional Mechanics And Automotive Enthusiasts Will Appreciate The Industrial Quality
Super- Construction is tough and precision welded, with an industrial grade finish.
In any handle position, the Universal Joint Release allows for precise load control.
Rapid Pump's exclusive dual parallel pump system lifts with far fewer pumps than other systems.
Extra- Stability is ensured by the use of wide steel casters.
TOP 8
AFF Floor Jack, Dual Pump Hydraulic Car Lift System
AFF
400SS
34.00 x 16.00 x 8.00 inches
105.00 pounds
Our Score
Product Features
Features: For faster and more efficient lifting, the jack is equipped with a twin hydraulic system.
Capacity: With a 4 ton capacity and Universal Joint Technology, you'll be able to descend with greater control.
Quick- Lift: The Pinned And Padded Saddle Allows For A Quick Lift As Well As Additional Vehicle Protection.
Simple to Store: Positioning, pumping, and easy storage are all made easier with the piece handle.
Move With Ease: Swivel Casters at the back of the chair allow for easy maneuverability.
TOP 9
BIG RED T820014S Torin Hydraulic Trolley Service/Floor Jack
BIG RED
T820014S
18.30 x 7.70 x 5.30 inches
18.00 pounds
Our Score
Product Features
A 1. Feature With a minimum lifting height of 5 feet and a 5 ton (3,000 pound) capacity, With a maximum height of 13" and a thickness of 3/5" Most cars, trucks, and SUVs can benefit from this product.
Heavy-Duty Steel Is Used To Build The Hydraulic Trolley Floor Jack, Providing Long-Term Durability and An Industrial Luster.
Overheating is avoided with the use of a safety bypass system. Ensures Safe Operation And Loading
When not in use, a plastic blow mold carrying case is included for easy storage. A One-Year Manufacturer's Limited Warranty is included.
Two large steel casters and two 360-degree casters are included in this package. Swivel Casters With A Degree Of Swivel For Easy Manoeuvrability
TOP 10
Liftmaster 3 Ton Heavy Duty Ultra Low Profile Steel Floor Jack
LiftMaster
6490
31.00 x 15.00 x 6.50 inches
72.75 pounds
Our Score
Product Features
Lifts with a dual pump system save time and money.
Low-profile design of 3 inches for easy installation under low-riding vehicles.
Two-piece knurled steel handle provides a secure grip and is equipped with a foam bumper to protect the vehicle.
Rubber Pad Has Been Strengthened To Provide Better Friction And Protection
TOP 11
Arcan 3-Ton Quick Rise Aluminum Floor Jack
ARCAN
A20018
30.00 x 13.50 x 8.00 inches
56.00 pounds
Our Score
Product Features
Pistons for a Dual Pump: To load the floor jack saddle, quickly raises it.
Aircraft that are light in weight - Aluminum, Grade 1 Ensures Easy Maneuvrability
Lift Arm with Reinforcement: Strengthens, stabilizes, and extends the life of the chassis
Origin: United States China
TOP 12
TCE AT82001U Torin Hydraulic Trolley Service/Floor Jack Combo
TCE
AT82001U
9.40 x 13.50 x 18.10 inches
31.25 pounds
Our Score
Product Features
The Floor Jack has a load capacity of 2 tons (4,000 pounds) and a minimum lifting height of 5 feet. With a maximum height of 13 inches and a thickness of 1/4 inch 3/8"; Two large steel casters and two 360-degree casters are included in this package. Swivel Casters With A Degree Of Swivel For Easy Manoeuvrability
The Hydraulic Trolley Service/Floor Jack Combo comes with one floor jack and two jack stands, giving you everything you need to lift and support most vehicles. Heavy-duty steel construction ensures long-term durability.
The height of a jack stand can be adjusted from ten to twenty feet. Sizes range from 13/16" to 16". 9/16" Load Capacity of 2 Tons (4,000 Lbs) Multi- The Sawtooth Design of the Position Ratchet Bar Allows For Quick Height Adjustments That Lock Into Place
Overheating is avoided thanks to the safety bypass system. Ensures safe operation by loading and unloading; The Floor Jack's built-in carrying handle allows it to be lifted quickly for maximum portability.
For better contact with the load being supported, each Jack Stand has a large saddle surface area. A wide pyramid foot base adds strength and stability; it complies with ASME safety standards and comes with a limited 2-year manufacturer warranty.
TOP 13
JEGS Professional Low-Profile 3-Ton Aluminum Floor Jack
JEGS
7.50 x 14.70 x 31.50 inches
58.00 pounds
Our Score
Product Features
Lifts from 3 to 19 inches with a low profile design
You Can Roll Jack Around With Ease Because It Is Made Of Lightweight Aluminum.
Surfaces are not marred by the use of a rubber lift pad.
To Use Safely On Dirt, Gravel, And Grass, An Optional Jack Skid Is Available Separately
The 360-degree rotating saddle makes it easier to move around.
TOP 14
Pro-Lift F-767 Grey Low Profile Floor Jack
Pro-LifT
F-767
17.91 x 5.32 x 8.47 inches
30.00 pounds
Our Score
Product Features
Range Of Lifting: 3 From 1/2 inch to 14 inch To ensure user safety, features such as solid steel construction and a safety release valve were added.
Low Profile Extra Low Profile
For safe operations, a patented bypass device protects against over pumping.
Long-term durability is ensured by the use of heavy-duty steel construction.
Overload protection is provided by a built-in safety valve.
TOP 15
Torin TAM815016L Hydraulic Low Profile Aluminum and Steel Racing Floor Jack
Torin
TAM815016L
24.70 x 13.20 x 8.20 inches
Our Score
Product Features
Constructed of Long-Lasting, High-Quality Materials Aluminum and steel are both strong materials. The Jack is equipped with a dual piston quick lift pump that makes it simple to raise the jack to the desired height.
The Racing Floor Jack has a 1.25-inch diameter and can be used for general or specialty applications. Capacity: 5 metric tons (3,000 pounds)
Range of Lifting: 3- 1/2" to 14" in diameter You Can Get Easy Access Under Low-Light Conditions With 1/8" Vehicles with a Name
Protects Your Vehicle From Damage With A Foam Bumper On The Handle; It's easy to carry thanks to the convenient side handle.
TOP 16
STANDTALL Electric Car Jack Kit
STANDTALL
12.20 x 5.10 x 17.70 inches
15.00 pounds
Our Score
Product Features
Range of Lifting: 1~17. 7 Inch: The height range for lifting is between 6 and 12 feet. 1~17. 7 Inch. The Jack can lift the car in less than a minute and change a tire quickly. Non- Design with a Slip Cross Groove. Height can be freely adjusted
Maximum Load Capacity (in lbs.): This Jack can easily lift vehicles (under 5 tons) to a height of 17 feet in less than two minutes. 7 Inches. It's Powerful Enough To Get Your Tire Replacement Jack Done Thanks To Its Built-In Motor Driver Powered By Cigarette Lighter Or Vehicle's Battery
Multi- Kits that are useful: This electric jack comes with an air pump and a bright LED light built in. As a result, it can cater to a variety of requirements. The Tire Screws Can Be Removed Easily With The Electric Impact Wrench That Comes With The Kit- Making The Tire Change Process Easier
Highest Level of Protection: When the machine reaches its height limit, it will automatically stop working to ensure maximum safety. This Car Jack Kit is versatile and can meet a variety of needs, making it an indispensable outdoor tool in an emergency. This Electric Jack makes it simple for anyone to change tires by requiring no physical effort.
Accessory Kit in Its Entirety: Included is an electric car jack. Wrench with an electric impact; Hammer of Safety; Case made of plastic; 5 meter long power cord A pair of gloves; A battery clamp with wire; Manuals, Instructions, and so on It's a very small and simple device to use.
TOP 17
E-HEELP Electric Car Jack Kit 5Ton 12V Hydraulic Car Jack Lift
E-HEELP
14.40 x 13.60 x 6.70 inches
Our Score
Product Features
[Easy Tire Change] Car Jack Hydraulic Type Car Jack Hydraulic Type Car Jack Hydraulic Type Car Jack Hydraulic Type Car Jack Hydraulic Type Car Jack Hydraulic Type Car Jack Hydraulic Type Car Jack Hydraulic Car Battery And Cigar Lighter The Car Battery Is What We Recommend To Our Customers Because It Will Make The Current More Stable. The Floor Jack has a tire pumping inflator that is equipped with a tire pressure display so you can easily monitor the tire pressure. If you've never changed a tire before and aren't used to using a standard car jack, you'll be amazed at how simple and quick it is.
[Poweful Car Jack] This electric car jack is hydraulically powered and capable of lifting vehicles weighing up to 5 tons in under 2 minutes. Height (Range of Lifting: 7 Inch). The Hydraulic Jack's high-capacity engine nearly matches all automobiles, including sedans, SUVs, MPVs, pickup trucks, and trucks. The Hydraulic Srenth Is More Competitive Than Other Car Jacks Due To Its Powerful Hydraulic System.
[Portable Impact Wrench] This Electric Car Jack Kit Includes A Portable Ergonomic-Designed Impact Wrench. Electric Impact Wrench And Two Sleeves With Two Sizes Designed To Fit More Vehicles On The Market A Strong Motor And A Precisely-Controlled System This Electric Car Jack Kit has a specially designed speed control system that allows you to screw/unscrew in a very short amount of time, saving you a lot of time and energy.
[Multi- Scene Application] This Portable Car Lift With Two Led Lights Assists You In Finding Your Lifting Area And Illuminates Your Working Environment Even At Midnight. In addition, the Hydraulic Car Jack and Power Cable Connectors are waterproof, so they can be used even when it's raining. This Kit Is Truly Multi-Use, Whether In Your Home Garage, On A Road Trip, In A Car Repair Shop, On A Farm, Or In A Halfway Emergency. Applied.
[All For Your Safety] When the Hydraulic Jack reaches its maximum height or the weight exceeds the maximum loading weight, the Smart Overload Protection System kicks in, and the electric jack stops lifting automatically. If an emergency occurs on the halfway, the red triangle outside the Electric Car Jack Kit can be used as a warning sign by placing it behind your vehicle. The Safety Of The Operator And The Car Is Assured By The Electric Car Jack Kit.
TOP 18
Pro-LifT G-4630JSCB 3 Ton Heavy Duty Floor Jack/Jack Stands and Creeper Combo
Pro-LifT
G-4630JSCB
36.00 x 15.50 x 3.39 inches
5.00 pounds
Our Score
Product Features
The Steel Frame Construction of the Garage Jack With The 3 Ton Capacity Provides Added Strength And Durability. They ensure portability and stability with the 3" roller casters.
G-Force Pro Lift The 4630Jscb Mechanics Set includes three garage essentials in one easy-to-carry package. It includes a 3 ton garage jack, a 3 ton jack stand, and a detachable creeper weighing 300 pounds.
The 3 ton capacity of the Jack Stands is impressive. Place the ratchet bar in the frame and tighten it. The Ratchet Pawl Must Be Aligned With The Ratchet Portion Of The Bar.
The Creeper is 40" long and has a weight capacity of 300 lbs. It provides users with easy maneuverability thanks to its six casters.
The Garage Jack is designed to lift a vehicle but not to support one end. It must be used with the pair of 3 ton jack stands that are included.
Fit Type: Fits Everyone
TOP 19
BEETRO 3 in 1 Electric Hydraulic Car Jack
BEETRO
12.60 x 6.10 x 6.10 inches
10.25 pounds
Our Score
Product Features
Capacity rated: The maximum lifting weight of this car jack is 5 tons (11000 lbs), with a lifting height range of 6 to 17. 7 Inches. The air flow rate of the tire inflator is 35 liters per minute. It's simple to use and only takes about 2 minutes to reach maximum height, allowing you to complete repairs quickly and easily. Perfect for car owners, and especially good for women.
1st Concept: The Beetro Electric Hydraulic Jack has three functions: a 5-ton hydraulic jack, a tire inflator pump, and a built-in flashlight to meet your needs for changing tires or pumping up tires in an emergency. Suitable for most vehicles under 5 tons, such as sedans, SUVs, MPVs, and trucks, among others. It's a great helper for garages, farms, highways, and long-distance travel. Traveling a long distance or needing to replace a tire on the side of the road.
Power Supply for Everyone: It has a long 11-foot cord that can be connected to a cigarette lighter power outlet or a car battery. It comes with a 5-foot power cord that can be used to attach it to the front or back tire. It also has a built-in built-in built-in built-in built-in built-in built- Using A Flashlight And A Drop-In Don't Worry About Working At Night Or Missing Accessories With This Tool Box. When repairing on the highway, the red triangle on the surface of the tool box can be used as a warning road sign.
Assurance of safety: When the height limit of the electric car lift jack is reached, it will automatically stop working. the Self- The Jack's locking structure can keep the car from crashing to the ground and ensure the safety of both the car and the people inside. The jack's internal circuit breaker can protect your car from overheating.
Keep in mind that Never exceed a 5 ton capacity. Use the jack on a level and firm surface. To Provide Sufficient Electricity, Start Your Car Engine Before You Operate. When the pressure rod can't be lowered any further, remove the safety valve cap, loosen with the small hexagonal wrench until the pressure rod falls to its previous position, then tighten.
TOP 20
E-HEELP Electric Car Jack 5Ton 12V Kit Car Jack Hydraulic
E-HEELP
14.00 x 6.70 x 9.40 inches
15.30 pounds
Our Score
Product Features
Car Jack Hydraulic [Universal Applied] Can Be Powered In Two Ways: Car Cigarette Lighter And Battery Clip With 12V Dc Power Socket The High- Power Motors are nearly identical to all vehicles on the market, including sedans, SUVs, MPVs, trucks, and pickup trucks. You can also use the car jack to lift your motorcycle or other heavy items. Please ensure that you are operating on flat ground and that the load weight does not exceed the maximum allowed.
E- (Electric Car Jack) E- (Electric Car Jack) E- (Electric Car Jack) E The Heelp Electric Car Jack is hydraulically powered, allowing it to lift vehicles weighing less than 5 tons (11023 lbs) in less than 2 minutes. The Hydraulic Jack's high-capacity engine nearly matches all automobiles, including sedans, SUVs, MPVs, and trucks. The Hydraulic Srenth Is More Competitive Than Other Car Jacks Due To Its Powerful Hydraulic System.
[Multi- This Portable Hydraulic Jack Can Be Used In Your Home Garage, On A Road Trip, In A Car Repair Shop, On A Farm, Or In A Halfway Emergency. Because the car jack and the power cable connectors are waterproof, you can use them even when it's raining. Plus, two LED lights make it easier to locate your lift and illuminate your working environment, even in the dead of night.
[Easy Pumping] With a tire inflator pump built into the electric car jack, there's no need to be concerned about a flat tire in the middle of nowhere. You can monitor the tire pressure while pumping because the pump has a tire pressure display. Now you can put your tire-changing woes behind you!
[All For Your Safety] When the Electric Hydraulic Jack reaches its maximum height or weight, the Overload Protection System kicks in, and the Floor Jack will stop lifting automatically. In the meantime, the cross lines on the top of the bar head improve lifting friction. If an emergency arises, the red triangle on the outside of the Electric Car Jack Kit can be used as a warning sign by simply placing it behind your vehicle.