19 Of Best Aluminum Check Valves In 2024
TOP 1
uxcell Non-Return One Way Check Valve 9mm Barb OD Aluminum Alloy
uxcell
Our Score
Product Features
[One-Way Non-Reversible] Return] - Keep the water or fuel from returning to the tank by preventing it from returning to the line.
[Size] - 22X59 is the size of the fitting. 1Mm / 0. 87X2. 33 inch (Dia*L); 33 inch (Dia*L); 33 inch (Dia*L); 33 inch Inner Dia Barb 5Mm / 0. 2 Inch; Barb Diagonal Outer 9Mm / 0. 35 Inch; Length of Barb: 5Mm / 0. 69 Inch; Size of Hose Clamps: 6 mm to 12 mm / 0. From 24Inch to 0 47Inch
- [Material] - [Material] - [Material] The corrosion resistance of the aluminum alloy check valve and the 304 stainless steel hose clamp is excellent.
[Barbed Fitting] is a term used to describe a piece of equipment that has been barbed Barbs on both sides of the fitting, along with hose clamps, will ensure a good seal and a secure connection.
[Application] - If you're looking for a unique way to express yourself, In the pipeline system, it is commonly used on oil, gasoline, or water lines.
TOP 2
Strataflo 1" NPT Check Valve Aluminum
Strataflo
5300
Our Score
Product Features
Fully- Buna-Filled Buna-Filled Buna-Filled Bun S Rubber Poppet For Bubble-Gum-Gum-Gum-Gum-Gum a snug fit
For Corrosion Resistance, it's made of anodized A356 Marine Grade Aluminum.
Made in the USA, each piece is hand-assembled and tested.
Both ends of the threads are female Npt threads.
Copper or bronze fittings should not be connected directly.
The maximum working pressure is 400 psi, with a cracking pressure of 1 psi.
TOP 3
Baomain Female Threaded Air Gas Water Non Return One Way CV-03 Check Valve 3
Baomain
Our Score
Product Features
Dimensions: 43 x 19 mm / 1. 69" X 0. 75" x 75" x 75" x 75" x 75" x 75
Dimensions of the thread 16Mm 3/8 Pt
This valve allows the medium to flow in only one direction (air, water, or oil).
TOP 4
Tickas Check Valve,12mm Inline One-way Non-return Check Valve Fuel Water Gas Air Vacuum Aluminum Valve
Tickas
1.97 x 0.59 x 0.28 inches
Our Score
Product Features
Fine Craftsmanship and Consistent Performance High tensile strength and hardness, as well as a long service life.
The fluid flow direction is indicated by an arrow on the valve, which prevents fuel from returning to the tank and keeps it in the line.
Petrol, Diesel, Biodiesel, Water, Coolant, Oil, and Air/Vacuum are all acceptable fuels.
Pumps for water pressure are ideal. Priming.
It's simple to put in and take out. Marine, automotive, caravans/rvs, and agriculture are just a few of the industries that benefit from this product.
TOP 5
Check Valve, High Reliability Thread Check Valve Aluminum Alloy Material
Shanrya
Our Score
Product Features
A Oneway Check Valve can be installed in any gasoline or diesel fuel system where the fuel should only flow in one direction.
The Inside Is Made Of Nbr Nitrile Rubber, A High-Quality Rubber That Is More Resistant To Diesel Gasoline And Aging Than Regular Rubber.
The Hose Is Easy To Install And Not Easy To Fall Off Because The Joint Is A Step Type, Also Known As A Pagoda Type.
The exterior is made of a high-quality aluminum alloy that is more durable and has a longer service life.
Replacement Fuel System For Peugeot, Helicopters, Ships, Motorcycles, And Other Vehicles
TOP 6
Check Valve, 2 Pieces 3/8" 10mm Inline ABS 1 Way Water Non Return Check Valve
MagiDeal
3/8\"
0.79 x 0.28 x 1.69 inches
Our Score
Product Features
Normal Performance Between the Ages of 25 and 60, Strong Acid, Alkali, and Salt Corrosion Resistance
The shell is made of ABS resin, and the diaphragm is made of silicone rubber.
The total length is 43 millimeters and one millimeter. 69 Inch
10 millimeters/zero millimeters/zero millimeters/zero mill 39 Inch
In a fluid system, a check valve is used to prevent reverse flow of fluid, or in a pneumatic system, a check valve is used to prevent reverse flow of compressed air.
TOP 7
Check Valve, 3/8 Inch 10 mm ABS Plug-in Check Valve Fuel Oil Water Gas Air One-Way Check Valve
Blulu
Our Score
Product Features
You Will Receive 6 No-Fuss No-Fuss No-Fuss No-Fuss No-F Return Check Valves That Are 3/8 Inch In Diameter, Or 1.25 Inches. Check Valves In Different Situations To Prevent Fluid Backflow, 61 Inches Long, Enough Quantity To Meet Your Use Of Check Valves In Different Situations To Prevent Fluid Backflow
Material: The Internal Valve Core Is Made Of Silicone, And The Check Valve Is Made Of Abs Plastic. Abs Plastic Has A High Hardness, Good Heat Resistance, And Corrosion Resistance, Strong Resistance To Acids And Alkalis, And Is To Some Extent Resistant To Organic Solvents.
Used a lot: One- Way valves can be used in a variety of applications, including water treatment, air purification, automobile parts, machinery manufacturing, and household appliances. , To Ensure That The Medium Does Not Backflow
Note: Pay Special Attention To The Flow Direction Of The Medium When Installing The Check Valve; The medium's normal flow direction should match the arrow direction indicated on the valve body; otherwise, the medium's normal flow will be cut off.
Introduction to the Function: The 3/8 Check Valve is used in a fluid system to prevent backflow, or in a pneumatic system to prevent compressed air backflow. This Check Valve Can Be Used At Temperatures As Low As - The temperature ranges from 20°C to 70°C.
TOP 8
Control Devices P2525-1WA Brass Ball Check Valve
Control Devices
P2525-1WA
Our Score
Product Features
Corrosion resistance, ductility at high temperatures, and low magnetic permeability are all advantages of brass.
For small compressors, it can be used as a tank check valve or as a component in pneumatic circuits.
A maximum working temperature of 250 degrees Fahrenheit and a maximum pressure rating of 250 pounds per square inch
O-fluorocarbon is a type of fluorocarbon that can be found Rings that can withstand higher temperatures and chemicals
Female and male Npt threads are used to connect pipes with different ends.
TOP 9
BBT Check Valve, 1Piece 3/8" 10mm Inline ABS 1 Way Water Non Return Check Valve
BBTUS
Our Score
Product Features
The total length is 43 millimeters and one millimeter. 69 Inch
10 millimeters/zero millimeters/zero millimeters/zero mill 39 Inch
Normal Performance Between the Ages of 25 and 60, Strong Acid, Alkali, and Salt Corrosion Resistance
The shell is made of ABS resin, and the diaphragm is made of silicone rubber.
In a fluid system, a check valve is used to prevent reverse flow of fluid, or in a pneumatic system, a check valve is used to prevent reverse flow of compressed air.
TOP 10
Control Devices-M2525-1WA Brass Ball Check Valve
Control Devices
M2525-1WA
0.09 pounds
Our Score
Product Features
Corrosion resistance, ductility at high temperatures, and low magnetic permeability are all advantages of brass.
For small compressors, it can be used as a tank check valve or as a component in pneumatic circuits.
A maximum working temperature of 250 degrees Fahrenheit and a maximum pressure rating of 250 pounds per square inch
O-fluorocarbon is a type of fluorocarbon that can be found Rings that can withstand higher temperatures and chemicals
Female and male Npt threads are used to connect pipes with different ends.
TOP 11
Feelers 3/8" One Way Inline Check Valve Non-Return One-Way Air Water Gas Check Valve Ozone Resistance PVDF
Feelers
Our Score
Product Features
[Function] These 3/8-Inch Check Valves Are Used To Stop Countercurrent Liquids In Fluid Systems Or To Prevent Reverse Flow Of Compressed Air In Pneumatic Systems.
[Material] Pvdf is used for the one-way check valves, and Silicon Rubber is used for the diaphragm.
[Wide Application] Used in a variety of fields, including water treatment, air purification, automotive parts, machinery, medical equipment, and household appliances.
[Dimensions] Diameter: 3/8" Barb; Fits 3/8" Hose Id; Length in total: 43Mm/1. 69 Inch
[Performance] Acid, alkali, and salt corrosion resistance, as well as the ability to be used for a variety of liquids. normal performance between the ages of 25 and 60.
TOP 12
Little Giant CV-10 Check Valve
Little Giant
89695
6.00 x 4.50 x 0.50 inches
0.04 pounds
Our Score
Product Features
Fittings: Designed To Work With Pumps That Have A 1/4-Inch Bore Inch Fnpt Pipe Fitting And 3/8-Inch Fnpt Pipe Fitting Vinyl Tubing; Inch Vinyl Tubing; Inch Vinyl Tubing; Inch Vinyl The Check Valve is 1/4-inch in diameter. On one end, inch Mnpt, and on the other, inch Mnpt 430- On the other end, there's an inch of barbed wire.
Pumps for removing condensate from Little Giants: Only Little Giant's Vcl-Series Check Valves Work With This Check Valve. To Keep Condensate From Draining Back Into The System, Use 14/24, Vcma Series, And Vcc Series Condensate Pumps
Warranty: This Check Valve is backed by a one-year warranty. Our Technical Support Experts Back Up The Manufacturer's Warranty For A Year
Material: The body and seat of the check valve are made of acetal, and the valve is O-shaped. The ball is made of Buna-N, and the ring is made of Nitrile.
TOP 13
Metaland One Way Check Valve
Metaland
Our Score
Product Features
[Material] You may receive semitransparent ones, which are our most recent product. They can withstand much more fuel, oil, and acid than milky ones. 100% Pp Polypropylene Plastic Is Better Than Pvdf Is Better Than Pvdf Is Better Than Pvdf Free of lead, long-lasting, and safe to drink.
[Function] Check Valves Can Be Used In Fluid Systems To Prevent Countercurrent Liquids, Or In Pneumatic Systems To Prevent Reverse Compressed Air Flow. Pharmaceutical, food and beverage, laboratory, chemical processing and handling, and printing and labeling applications are all possible.
[Working Temperature] - - - - - - - - - - - - The temperature ranges from 120 to 280 degrees Fahrenheit.
[Size] 3/8" Hose Barb, Fits 3/8" Id Hoses And Tubing
[Quantity] 3 pcs Plastic One-Size-Fits-All-Sizes-All-Sizes-All-Sizes Check Valve in the Right Direction
TOP 14
John Guest Acetal Copolymer Tube Fitting
John Guest
3/8SCV
2.00 x 0.75 x 0.75 inches
0.05 pounds
Our Score
Product Features
Tube fittings made of nylon and polyurethane are accepted.
In a liquid piping system, an Imperial single check valve is used to prevent flow reversal.
Working pressures of up to 145 psi are possible.
For Quality Assurance, it complies with NSF/ANSI Standards 14, 51, and 61.
For low moisture absorption and high tensile and flexural strength, this product is made of Acetal Copolymer Plastic.
TOP 15
HydraForce HY LSV1-6T-N - 3 Port Shuttle Valve #6 ORB Ports
Hydraforce
Our Score
Product Features
The Floating Ball Will Return To The Low-Pressure Side.
Ball-and-Socket Hydraulic Shuttle Valve (Ball-and-Socket Hydraulic Type)
Ports: 6 Sae O- 9/16-inch ring Thread No. 18
3500 psi is the maximum working pressure.
Rating of Flow: 7 Gpm
TOP 16
Quickun 3/8" Barb Hose One Way Inline Check Valve Non Return Ozone Resistance PVDF Plastic One-Way Fuel Oil Water Gas Pump Air Check Valve
Quickun
Our Score
Product Features
3/8" Barb [Diameter], Can Fit 3/8" Hose Id
[Material] Pvdf is used for the shell, and Silicon Rubber is used for the diaphragm.
43Mm/1 [Total Length] 69 Inch
[Performance] Normal Performance Between the Ages of 25 and 60, Strong Acid, Alkali, and Salt Corrosion Resistance
[Application] A check valve is a device that is used in a fluid system to prevent reverse flow of the fluid or in a pneumatic system to prevent reverse flow of compressed air.
TOP 17
Zoeller 30-0040 1.5" PVC Quiet Union Check Valve
Zoeller
30-0040
11.00 x 8.00 x 12.00 inches
1.00 pounds
Our Score
Product Features
Check Valve for PVC Quiet Union
Zoeller is 30 years old.
Components that are included: Unit
Number of Models: 30-
Guide to Instructions
TOP 18
JoyTube 5 Packs Check Valve 3/8” One-Way PVDF Plastic Hose Barb
JoyTube
as8-640-scv
Our Score
Product Features
The Opening Pressure of the Barb Hose Check Valve is: Maximum Back Pressure: 5 Kpa, Minimum Back Pressure: 5 Kpa, Minimum Back Pressure: 5 Kp 300Kpa
Both sides of a one-way inline check valve can be connected to a hose barb.
Perfect for Hydraulic Systems to Prevent Material Reverse Flow, or Compressed Air for Pneumatic Systems to Prevent Material Reverse Flow
The Inside Of A Pvdf Wear Resistant Check Valve Is Designed With A Pagoda-Style Design. Non-removable shaped card slot Non-Slip And Slippery Toxic, with excellent airtightness and adsorption capacity
Pvdf, Sturdy, and Long-Lasting For Long-Term Use, Resistant And Durable
TOP 19
Duda Energy VCV-WOG1000-F050 Vertical Check Valve
Duda Energy
VCV-WOG1000-F050
Our Score
Product Features
Temperature of the fluid: Water, oil, air, gas, and light acids/alkalis can all be used at temperatures between 20 and 302 degrees Fahrenheit.
6'', L: 4'' - Dimensions can be found in the drawing.
In order to direct flow in one direction, this device is used.
Spring made of stainless steel- Low Cracking Pressure (5 Psi) when fully loaded
Valve that can be serviced - Threads for disassembly, Female Npt Ports