22 Of Best Carbon Steel Concrete Screws In 2024
TOP 1
Wej-It Wej-Con Concrete Screw, 1022 Carbon Steel
Wej-It
HCS3611
Our Score
Product Features
The 1022 Carbon Steel Screw Is Corrosion-Resistant. R-Resistant Blue R-Resistant Blue R-Resist To Resist 1,000 Hours Of Salt Spray, A Blocker Coating That Meets Astm B117 Specifications
Concrete Screws create threads in concrete, hollow block, brick, mortar, and concrete masonry units, allowing for a secure hold without the use of threaded inserts.
Use One- Maximum Values For Safe Working Loads (As Required By Local Regulations): Fourth Or Less Of Listed Maximum Values
The ultimate tensile strength of this material is 425 pounds. In a 2,730-square-foot space with a one-inch embedment depth and a one-inch edge distance Concrete with a psi rating
The Hex Washer Head has a flange that provides additional bearing surface to distribute force over the fastened fixture, as well as a slotted drive for use with a flat-drive screwdriver. Driver of a blade
TOP 2
Blue Concrete Anchor Screws 1/4" x 1-3/4" Carbon Steel Hardened
Jake Sales
1.75 x 0.42 x 0.42 inches
Our Score
Product Features
For the pilot hole, use a 3/16" Carbide Tip Drill Bit - There is no drill bit included in this kit.
The following are the measurements: Shaft is 25 inches long. Width/Height: 42" LENGTH: 75 INCHES Use a hex bit that is 5/16" in diameter.
Used for light to medium duty concrete in general - Applications for both the interior and exterior
TOP 3
Hilti Kwik HUS Concrete and Masonry Screw Anchors - Carbon Steel
HILTI
Our Score
Product Features
For uncracked concrete, Ac 193 was used to evaluate it.
Installing It Is Simple And Quick, And It Doesn't Require Any Special Skills The use of a precision torque wrench or hammering is required.
Thread Design That Is Optimized For The Best-In-Class Superior Load Values And Class-Leading Performance
Fully- Anchoring System That Can Be Removed
To Be Used With Ansi-Normal Ansi-Normal Ansi-Normal An Drill Bit with Tolerance; There's no need for special drill bits with tight tolerances.
TOP 4
Hard-to-Find Fastener 014973210632 Hex Head Tapcon Screws
Hard-to-Find Fastener
014973210632
4.25 x 2.63 x 1.00 inches
0.35 pounds
Our Score
Product Features
Length: 1/4 Inch
Diameter: 1/4"
Material: Steel
Style of hair: Hex Washer (Hex) is a type of washer that is made up of hexagonal shapes.
Finish: Ruspert in blue.
TOP 5
Red Head LDT-3454 Large Diameter Tapcon 3/4-Inch by 5-1/2-Inch Anchor
ITW RED HEAD
LDT-3454
Our Score
Product Features
Anchor Bodies are made of Grade 19 hardened carbon steel that has been zinc plated.
Its Own Threads Are Cut Into Concrete
Standard Drill Bits should be used.
Anti-Static Hex Washer Head, Finished Serrations for rotation
A Length Identification Code Is Stamped On The Anchor
TOP 6
Hilti Kwik HUS Concrete and Masonry Screw Anchors - Carbon Steel
HILTI
Our Score
Product Features
For uncracked concrete, Ac 193 was used to evaluate it.
Installing It Is Simple And Quick, And It Doesn't Require Any Special Skills The use of a precision torque wrench or hammering is required.
Thread Design That Is Optimized For The Best-In-Class Superior Load Values And Class-Leading Performance
Fully- Anchoring System That Can Be Removed
To Be Used With Ansi-Normal Ansi-Normal Ansi-Normal An Drill Bit with Tolerance; There's no need for special drill bits with tight tolerances.
TOP 7
SNUG Fasteners 100 Qty 1/4" x 2-3/4" Hex Head Diamond Tip Concrete Screws to Anchor Masonry
SNUG Fasteners
SNG501
4.00 x 6.00 x 3.00 inches
2.36 pounds
Our Score
Product Features
Superior Holding Strength is Ensured by Deep Threads
The Enviroseal Blue Coating provides corrosion resistance and long-term performance.
The Diamond Tip Allows For Better Penetrating Into Difficult Materials
100 Screws and 1 Masonry Drill Bit are included in the package.
Items can be anchored to concrete, brick, block, or other masonry materials with ease.
TOP 8
SNUG Fasteners 100 Qty 1/4" x 1-3/4" Hex Head Diamond Tip Concrete Screws to Anchor Masonry
SNUG Fasteners
SNG499
4.00 x 6.00 x 3.00 inches
1.56 pounds
Our Score
Product Features
Superior Holding Strength is Ensured by Deep Threads
The Enviroseal Blue Coating provides corrosion resistance and long-term performance.
The Diamond Tip Allows For Better Penetrating Into Difficult Materials
100 Screws and 1 Masonry Drill Bit are included in the package.
Items can be anchored to concrete, brick, block, or other masonry materials with ease.
TOP 9
CONFAST LDC383 3/8" x 3" Zinc Plated Large Diameter Concrete Screw
CONFAST
Our Score
Product Features
Threads with a Low Torque – Installation is simple.
Will Cut Itself a Hole in Concrete - When properly inserted into a hole that has been properly drilled
Make Use Of A Common Bit - The diameter of the bit and the diameter of the anchor are the same.
Design in One Piece – There is no need to assemble; Prepared For Installation
Hex Washer Head with Serrations - Back pain is avoided by using this product.
TOP 10
CONFAST 1/4" x 1-1/4" Concrete Screws 410 Stainless Steel Hex
CONFAST
Our Score
Product Features
Hex Head- It's possible to use a hex driver to get it to work.
Each box has a little something in it. Improved Holding Values And Lower Costs With A Proper Bit
Self- Tapping- No other anchor is required because the threads are tapped directly into the masonry.
The Diamond Point – To save time, it is more convenient to drive the screw.
TOP 11
SNUG Fasteners 100 Qty 1/4" x 1-1/4" Hex Head Diamond Tip Concrete Screws to Anchor Masonry
SNUG Fasteners
SNG498
4.00 x 6.00 x 0.50 inches
1.14 pounds
Our Score
Product Features
Superior Holding Strength is Ensured by Deep Threads
The Enviroseal Blue Coating provides corrosion resistance and long-term performance.
The Diamond Tip Allows For Better Penetrating Into Difficult Materials
100 Screws and 1 Masonry Drill Bit are included in the package.
Items can be anchored to concrete, brick, block, or other masonry materials with ease.
TOP 12
ITW Red Head LDT-3830 Large Diameter Tapcon 3/8-Inch by 3-Inch Anchor
ITW RED HEAD
LDT-3830
8.00 x 5.00 x 2.50 inches
0.01 pounds
Our Score
Product Features
Anchor Bodies are made of Grade 7 hardened carbon steel that has been zinc plated.
Its Own Threads Are Cut Into Concrete
Standard Drill Bits should be used.
Anti-Static Hex Washer Head, Finished Serrations for rotation
A Length Identification Code Is Stamped On The Anchor
TOP 13
SNUG Fasteners 100 Qty 3/16" x 1-3/4" Flat Head Phillips Diamond Tip Concrete Screws to Anchor Masonry
SNUG Fasteners
SNG481
4.00 x 6.00 x 0.50 inches
0.90 pounds
Our Score
Product Features
Superior Holding Strength is Ensured by Deep Threads
The Enviroseal Blue Coating provides corrosion resistance and long-term performance.
The Diamond Tip Allows For Better Penetrating Into Difficult Materials
100 Screws and 1 Masonry Drill Bit are included in the package.
Items can be anchored to concrete, brick, block, or other masonry materials with ease.
TOP 14
SNUG Fasteners 100 Qty 3/16" x 2-1/4" Hex Head Diamond Tip Concrete Screws to Anchor Masonry
SNUG Fasteners
SNG488
4.00 x 6.00 x 0.50 inches
1.16 pounds
Our Score
Product Features
Superior Holding Strength is Ensured by Deep Threads
The Enviroseal Blue Coating provides corrosion resistance and long-term performance.
The Diamond Tip Allows For Better Penetrating Into Difficult Materials
100 Screws and 1 Masonry Drill Bit are included in the package.
Items can be anchored to concrete, brick, block, or other masonry materials with ease.
TOP 15
SNUG Fasteners 100 Qty 1/4" x 1-3/4" Flat Head Phillips Diamond Tip Concrete Screws to Anchor Masonry
SNUG Fasteners
SNG493
4.00 x 6.00 x 3.00 inches
1.51 pounds
Our Score
Product Features
Superior Holding Strength is Ensured by Deep Threads
The Enviroseal Blue Coating provides corrosion resistance and long-term performance.
The Diamond Tip Allows For Better Penetrating Into Difficult Materials
100 Screws and 1 Masonry Drill Bit are included in the package.
Items can be anchored to concrete, brick, block, or other masonry materials with ease.
TOP 16
CONFAST 1/4" x 2-3/4" Blue Flat Phillips Concrete Screw Anchor
CONFAST
Our Score
Product Features
Each box has a little something in it. Improved Holding Values And Lower Costs With A Proper Bit
Each box has a little something in it. Improved Holding Values And Lower Costs With A Proper Bit
Self- Tapping- No other anchor is required because the threads are tapped directly into the masonry.
Phillips Head with a Flat Surface With a Phillips Screwdriver, it's possible to drive it in.
The Diamond Point – To save time, it is more convenient to drive the screw.
TOP 17
CONFAST 3/16" x 4" Blue Flat Phillips Concrete Screw Anchor
CONFAST
Our Score
Product Features
Each box has a little something in it. Improved Holding Values And Lower Costs With A Proper Bit
Each box has a little something in it. Improved Holding Values And Lower Costs With A Proper Bit
Self- Tapping- No other anchor is required because the threads are tapped directly into the masonry.
Phillips Head with a Flat Surface With a Phillips Screwdriver, it's possible to drive it in.
The Diamond Point – To save time, it is more convenient to drive the screw.
TOP 18
CONFAST 1/4" x 2-1/4" Concrete Screws 410 Stainless Steel Hex
CONFAST
Our Score
Product Features
Hex Head- It's possible to use a hex driver to get it to work.
Each box has a little something in it. Improved Holding Values And Lower Costs With A Proper Bit
Self- Tapping- No other anchor is required because the threads are tapped directly into the masonry.
The Diamond Point – To save time, it is more convenient to drive the screw.
TOP 19
Concrete Screw - Red Seal Moisture Barrier High Performance
Phillips
RS-FH-25X225
2.25 x 0.25 x 0.25 inches
Our Score
Product Features
Moisture Is Kept In Or Out: Use To Prevent Moisture From Seeping Into Holes Drilled Into Brick To Protect Your Valuable Structure!
Barrier Against Moisture It works on concrete pads, electrical boxes, stucco, and other surfaces.
Installation: Use outside on electrical boxes or hose reels. Also works well for mounting televisions near a swimming pool.
Concrete Screw with High Performance: Motorcycle Ramps And Other Brackets Can Be Mounted Into Concrete Slabs.
Installation Instructions for Light Duty Concrete: Long-lasting and durable.
TOP 20
SNUG Fasteners 100 Qty 3/16" x 1-1/4" Hex Head Diamond Tip Concrete Screws to Anchor Masonry
SNUG Fasteners
SNG486
4.00 x 6.00 x 3.00 inches
0.67 pounds
Our Score
Product Features
Superior Holding Strength is Ensured by Deep Threads
The Enviroseal Blue Coating provides corrosion resistance and long-term performance.
The Diamond Tip Allows For Better Penetrating Into Difficult Materials
100 Screws and 1 Masonry Drill Bit are included in the package.
Items can be anchored to concrete, brick, block, or other masonry materials with ease.
TOP 21
SNUG Fasteners 100 Qty 1/4" x 1-1/4" Flat Head Phillips Diamond Tip Concrete Screws to Anchor Masonry
SNUG Fasteners
SNG492
4.00 x 6.00 x 3.00 inches
Our Score
Product Features
Superior Holding Strength is Ensured by Deep Threads
The Enviroseal Blue Coating provides corrosion resistance and long-term performance.
The Diamond Tip Allows For Better Penetrating Into Difficult Materials
100 Screws and 1 Masonry Drill Bit are included in the package.
Items can be anchored to concrete, brick, block, or other masonry materials with ease.
TOP 22
CONFAST 3/16" x 1-3/4" Blue Flat Phillips Concrete Screw Anchor
CONFAST
Our Score
Product Features
Each box has a little something in it. Improved Holding Values And Lower Costs With A Proper Bit
Each box has a little something in it. Improved Holding Values And Lower Costs With A Proper Bit
Self- Tapping- No other anchor is required because the threads are tapped directly into the masonry.
Phillips Head with a Flat Surface With a Phillips Screwdriver, it's possible to drive it in.
The Diamond Point – To save time, it is more convenient to drive the screw.