23 Of Best Distribution Wall Plates Connectors In 2024

TOP 1

OSD Audio 100W Impedance Matching

OSD Audio
SVC100
5.00 x 3.00 x 4.50 inches

Our Score

4.95

Product Features

Controlling the volume: The controls allow you to adjust the volume of a pair of speakers in a home audio system without affecting the volume of other speakers. They work well in both soft and high-volume environments.
High Strength: With minimal bass roll-off, the Svc100 is rated at 100 Watts per channel. Off. It comes with front-mounted adjustable jumpers that can be used to add up to eight pairs of 8 Ohm speakers at the same time.
Knob: A 12-foot wire Linear Rotary in Steps- For A Wide Range Of Listening Volumes, A Style Knob Is Provided. To match any room's decor, this set includes a junction box, screws, and white, ivory, and almond trim plates.
Protection from Impedance: By matching the impedance, this feature of the Svc100 aids in stabilizing the Ohm Load going back to the amp or receiver with parallel connections, preventing overheating and damaging expensive equipment.
Design: The Dcor Plates are easy to install into a wall and work with almost any system for dedicated audio zones. It fits in a standard gang box with a 2 and accepts up to 14 gauge wiring. 9 Depth.
TOP 2

Wireless BT Receiver Wall Mount

Pyle
PWA15BT
3.00 x 4.00 x 4.00 inches
0.22 pounds

Our Score

4.9

Product Features

Connectivity via Bluetooth Built-in Bluetooth makes it simple to stream music to a compatible intercom or speaker system. All of today's smart devices are compatible with it.
Installing Is Simple: Install the Wall Amplifier System on any available wall in your home or office to gain access to a wide range of sound configurations. For mounting the Wall Plate Amplifier Receiver in certain wall installation applications, minor fitting adjustments may be required.
Features have been updated: With the in-wall Bluetooth receiver, you can enjoy features like rotary volume control, 1/4'' mic input, and a USB port for device charging.
The person who connects their Bluetooth device to the unit must stand in front of it.
Paging with a microphone This wall plate receiver includes a microphone paging feature as well as easy source audio control.
For Bluetooth pairing, press and hold the Master Dial for a long time.
Connections by Hard Wire: Optionally, the Wall Amplifier System can be hardwired and powered by an Aux (3. External audio devices can be connected and streamed via a 5mm audio jack. The Speaker Terminal Block on the Rear Panel Allows You To Connect The Receiver To A Pair Of Speakers.
TOP 3

Wall Mount Volume Control Knob

Pyle
PVC1
3.00 x 3.00 x 3.00 inches
0.94 pounds

Our Score

4.8

Product Features

Four- Selector for Speaker Pairs: This Wall Plate Volume Control Can Be Used To Control Up To 4 Pairs Of Speakers Throughout Your Home. It Keeps The Full Hi-Def Quality No Low Frequency Roll-Off in Fi Audio Frequency Response
Adjustment of the Rotary Knob: A Multi- Placement of Light - For Whole House Audio Source Volume Systems, a Touch Rotary Knob Style Adjustment is available. Within various areas of your home, office, or business applications, you can control speaker volume independently.
Components that are included: 1 Pyle- Product with a Home Brand
Plate for a wall or a wall: This Entire- A Universal Standard Decorative Flush In-Wall Volume Control Is A Finishing Plate For Speaker And Stereo System Control That Can Be Installed On The Wall Or Mounted On The Wall It comes with a mounting ring as well as other wire nuts for installation.
Type of Connector: Usb
Frequency Response at 20Hz and 20Khz: Pyle Wall Mount Volume Control Your Speakers To Deliver Rich, High-Quality Sound In The Same Room. This In- The Wall Volume Control Is Designed To Reproduce High-Frequency Signals Over A Wide Frequency Response Range. Sound of Authenticity
Handling 100W of power: In-Pyle Flush Wall Volume Control is compatible with all audio and video systems that have a power output of up to 100 watts. A practical audio source volume setting that allows you to control speaker volume in each audio zone independently.
TOP 4

Leviton 40249-W Standard Telephone Wall Jack

Leviton
40249-W
4.50 x 3.00 x 0.50 inches
0.10 pounds

Our Score

4.7

Product Features

Depending on the model, provide quick at-the-wall connections for Rj 11 telephone and/or F connection video applications.
High-quality ABS plastic or nylon that outperforms other plastics in terms of impact resistance, chemical resistance, and solvent resistance.
Plate for the wall: Included
Listed
6P4C
TOP 5

DATA COMM Electronics 45-0002-WH 2-Gang Recessed Low Voltage Cable Plate

DATA COMM
45-0002-WH
4.52 x 4.56 x 2.48 inches
0.17 pounds

Our Score

4.65

Product Features

It is possible to install it with the opening facing up or down.
Hides low-voltage audio video cables behind flat-panel TVs, amplifiers, and other audio and video devices that are mounted on the wall.
Bracket for mounting is not included.
Non-Toxic Materials Plastic that can be broken
Etl is a trademark registered in the United States and Canada.
TOP 6

OSD 300W in Wall Volume Control Knob

OSD Audio
SVC205
6.00 x 3.00 x 3.00 inches

Our Score

4.6

Product Features

Controlling the volume: The controls allow you to adjust the volume up or down, as well as set the source volume to the best possible level. Levels that are almost too quiet. The On/Off Switch allows you to completely turn off the sound.
Power: With minimal bass roll-off, the Svc205 is rated at 100 Watts per channel. Off. It comes with a front-end loader. Adjustable jumpers are mounted on the speakers to allow for easy adjustment when multiple pairs of speakers are connected.
Knob: A 12-foot wire Linear Rotary in Steps- For A Wide Range Of Listening Volumes, A Style Knob Is Provided. In a stereo system, precision electronics provide low distortion and a ruler flat frequency response.
Protection from Impedance: This feature of the Svc205 aids in the stabilization of the Ohm Load returning to the amplifier or receiver via parallel connections, preventing overheating and amplifier damage.
Design: The Dcor Plates are easy to install into a wall and work with almost any system for dedicated audio zones. It fits in a standard gang box with a 2 and accepts up to 14 gauge wiring. 9 Depth.
TOP 7

OSD in Wall Speaker Selector A/B Switch

OSD Audio
AB12
6.00 x 3.00 x 4.00 inches
0.40 pounds

Our Score

4.55

Product Features

Controlling the switch: With a single push of a button, you can toggle between two amplifiers and one pair of speakers, or two pairs of speakers and one amplifier.
Power: With minimal bass roll-off, the Ab12 is rated at 100 watts. Off. It allows the 100 watts to be directed to the speakers in either A or B, but not both.
Mounting: The Ab12 Selector is 1 W X 2 H X 1 D in size, allowing it to fit into most standard single-seater vehicles. Junction Boxes For Gangs With A 2. 9 Depth.
The frequency is as follows: A 14-foot wire To Get The Best Sound For Your Stereo System, Use 16 Gauge Wire With A Frequency Response Of 20Hz To 20Khz.
Design: The Dcor Plate is a simple wall plate that works with most systems to create dedicated audio zones. Removable and solderless terminals accept wire up to 14 gauge and fit in a standard gang box.
TOP 8

Morris Products 73095 Emergency Exit Light Wire Guard

Morris Products
73095
6.00 x 15.00 x 13.50 inches
1.40 pounds

Our Score

4.55

Product Features

Barrier to Lighting: This Emergency Exit Light Wire Guard protects indoor and outdoor lighting fixtures by allowing light and exit sign visibility while providing a durable covering.
Protection of Exit Signs: With this wire guard cage that mounts directly on the wall, you can keep your emergency exit sign in good condition.
Unit that can be mounted: This Emergency Exit Light Wire Guard can be easily mounted to the wall to provide a protective shield for your light fixtures and exit signs.
Construction: Heavy Duty: Long-term use of this wire guard for emergency lights and exit signs is recommended. This structure is made out of thick 8-inch steel. Steel Gauge - Wire with a unique shape for maximum protection.
The following is a list of electrical tools that can be used in a variety of situations Morris Products is proud to offer a wide range of electrical tools and applications, including wire connectors and non-metallic connectors. Cable Splicers And Insulated Ferrule To Nylon Cable Ties
TOP 9

Leviton 47609-EMP Telephone Patching Expansion Board

Leviton
47609-EMP
0.20 pounds

Our Score

4.45

Product Features

Fits in any Leviton Structured Media Enclosure with Ease
Use in conjunction with a Category 5E Voice and Data Board and/or a Telephone Line Distribution Board.
Panels from the Compact Series are ideal for multi-purpose applications. Dwelling units and apartments, as well as any other location where space and budget are important.
Not 110 Idc Punch Down, but Line Bridged Module with Patching Via Modular Plug
TOP 10

Cmple - 3RCA Wall Plate - Gold Plated RCA 3 RGB Component Video 1080P Full HD

Cmple
1081-565-N
0.98 x 0.98 x 0.98 inches
0.11 pounds

Our Score

4.45

Product Features

Component Video Cables And All Standard Rca Av Audio Video Cables Work Great; Installing the plate is simple; simply screw it in place and connect the cables to the front of the plate. Convenient And Cost-Effective One-Stop Shopping Lead Piece - Design Of A Frame And A Wall Plate
Wall Plate with Rca: There are three different colors on this plate. Component Video Connections With Coded Rca Jacks: Rgb (Red, Green, Blue) is a color scheme that consists of three primary colors: red, green It can also be used for video and audio applications that require a standard Rca Composite Video Stereo Left And Right Audio Setup. Ideal for use at home- Dvd player, television, camcorder, and set-top box are examples of entertainment systems. Top- Boxes, VCRs, and Other 3-D Objects Devices that are Rca compatible.
Exceptional Quality: ABS Plastic is used to make this product. Gold- Corrosion resistance, durability, and improved signal transmission are all advantages of using plated connectors. Up to 1080p high-definition video can be delivered. Wires Coming Into A Mounted Electrical Box Are Covered
Included in the package are: Cmple - 1 X Component Video 1080P Full HD Port, Av Composite Video 2Rca Stereo Audio Insert Outlet Cover Panel Mount, White (Mounting Screws Included) 3 Rca Wall Plate Component Video 1080P Full HD Port, Av Composite Video 2Rca Stereo Audio Insert Outlet Cover Panel Mount, White (Mounting Screws Included)
Management of Cables: When passing through a wall, this feature allows you to organize and protect low voltage cable from the inside instead of the outside. Remove that tangle of wires and conceal them behind a wall; Install cables flush to the wall surface behind your flat panel TV or other audio/video devices. Run Your Cables Through The Wall In A Clean And Neat Manor.
TOP 11

BestMounts in-Wall Cable Management 1-Gang Low Voltage Cable Pass Through Outer Nose Wall Plate

Best Mounts
BWPON-12-WHT
4.50 x 2.75 x 1.50 inches
0.06 pounds

Our Score

4.35

Product Features

The Low Voltage Cable Plate comes equipped with mounting screws.
Designed For Hdmi, Coax, Data, Voice, And Other Low-Voltage Applications Cabling for High Voltage
The Extraordinary All Types Of Av Cables Can Fit Through The Wide Opening. 6 Hdmi Cables Can Be Stored Easily Do you require more space? Take a look at the version with two gangs.
It's ideal for low-cost bundles. Running Power Cabling is a type of voltage cabling.
ABS Plastic is a strong and long-lasting material.
Low Voltage Pass Through Wall Plates give your installation a finished look while also allowing you to use any cable type you want.
It is possible to install it with the opening facing up or down.
TOP 12

RiteAV 1 Port HDMI and 1 Port RCA White and 1 Port Toslink and 1 Port Cat6 Ethernet White Wall Plate

RiteAV
RAV-4-4286

Our Score

4.3

Product Features

Exceptional
Just plug one cable into the front and the other into the back for a simple connection.
Both the front and back of the wallplate are identical.
There are screws included in the package.
Standard Outlet Boxes and Mounting Brackets are compatible.
TOP 13

Leviton 40159-W Decora Telephone/Video Wall Jack Assembly

Leviton
40159-W
4.00 x 6.00 x 1.00 inches
0.10 pounds

Our Score

4.25

Product Features

Lead-Free Models in the 6P4C Series Designing A Frame For Increased Reliability And Ease Of Installation
A matching Decora insert and a matching Decora wallplate are included in the Decora Wallplate Assemblies.
White
Terminals screwed on
Part of the award-winning Residential System from Leviton
TOP 14

Niles C5-HDDA CAT-5 component video and coaxial digital audio balun

Niles

Our Score

4.25

Product Features

Cat- Connector number five
Run Component Video And Digital Audio Signals Over Long Distances Using Cost-Effective Cat-II Cat-II Cat-II Cat-II Cat-II Cat-II Cat-II Cat-I 5 Cable
Passive Circuitry is a term used to describe circuitry that is not active. There is no need for an electrical supply.
Gold- Rca Jacks with Color Coded Plates
a part of Chassis Design
TOP 15

Satellite Wall Plate, White, F-pin Connector and Telephone Jack

Cable Showcase
301-02100
1.18 x 1.18 x 1.18 inches
0.20 pounds

Our Score

4.2

Product Features

Product for the Network / Phone
F-Type Satellite Wall Plate, F-Type Satellite Wall Plate, F-Type Satellite Wall White Telephone Jack with Pin Connector
Plates for the Wall
F-Type Satellite Wall Plate, F-Type Satellite Wall Plate, F-Type Satellite Wall White Telephone Jack with Pin Connector
301- 2100
TOP 16

StarTech.com Single Outlet 15-Pin Female VGA Wall Plate

StarTech
VGAPLATE
0.01 x 0.01 x 0.01 inches
0.09 pounds

Our Score

4.1

Product Features

Video Wall Plate / Video Wall Plate Extender / VGA Wall Plate
Incorporate An In- For neat and professional video installations, use a VGA port mounted on the wall.
VGA Extender Is Ideal For A/V Installers And Integrators
Provides A Clean Vga Extension Solution By Eliminating Cable Mess
Any standard Vga cable can be securely screwed in with this design.
TOP 17

Kwikjack CAT5E Data Jack

Dynacom
4330599040

Our Score

4

Product Features

Wire Dressing Is Made Easier With 'Surelock Retention Technology'
High- Designing with Density
Colour of White
Compatible with Kwiktool for simple termination
T536A or B is color coded.
TOP 18

Leviton 41108-RA5 Category 5 QuickPort Connector

Leviton
41108-RA5

Our Score

3.95

Product Features

Full Voice And Low-Voice Support Applications that use high-speed data
All Quickport Wallplates and Housings are compatible with this product.
Overcomes the limitations of a standard Cat 5 channel by providing additional headroom.
Accept Rj-Cat 5/3Accept Rj-Cat 5/3Accept Rj-Cat 5/3 45 Plugs
All Tia Channel Requirements are met by Cat 5 and 3 Connectors.
TOP 19

OSD Audio Outdoor Volume Control

OSD Audio
OSD Audio-OVC300GREY
4.75 x 3.28 x 3.00 inches

Our Score

3.95

Product Features

Controlling the volume: You can adjust the volume by turning the knob up or down. It does not increase the volume of your amplifier or receiver beyond the master volume level.
Outdoor: The Ovc300 is weatherproof, making it ideal for use on outdoor decks, patios, and swimming pools. It is resistant to extreme temperatures as well as unknown outdoor conditions such as rain, snow, and heat.
Power: 300 Watts Of Optimized Sound Quality With Minimal Bass Roll-Off Are Included In The Volume Control. Off. The system can control up to eight stereo speaker pairs at the same time throughout the house.
Protection from Impedance: This feature of the Ovc300 aids in the stabilization of the Ohm Load returning to the amplifier or receiver via parallel connections, preventing overheating and amplifier damage.
Design: The Speaker Wire Inserts are detachable and use lock slips, making it simple to connect to your speakers. It comes with a metal mounting plate and matching plastic to hang on the wall.
TOP 20

Leviton 41080-6WP 6-Port QuickPort Wallplate Single Gang

Leviton
41080-6WP
8.00 x 8.00 x 8.00 inches
0.10 pounds

Our Score

3.85

Product Features

Fits Nema Openings with a Minimum Rectangular Shape
Color- Screws with a matching pattern on the wallplate
The narrow width of the modules allows for a high port density in a small space.
Individual port configuration allows for greater flexibility in specification.
All Quickport Connectors are compatible with each other.
TOP 21

Vanco Vanco Bulk Cable 1-Gang Faceplate

Vanco
120614X
1.50 x 4.50 x 3.00 inches
0.05 pounds

Our Score

3.85

Product Features

Hdmi, Dvi, and Vga cables are all accommodated in this box, which has a hole diameter of about 1-inch. 1/2" X 1- 1/4" :
Technical Details – Type of Mount- Mounted on the wall Technical Details – Features- Unique Wall Plate Design Provides For Easier Installation Designed To Fit Single Standard Electrical Outlets Removable Design To Accommodate Areas Where Space Is Limited
Technical Details – Type of Mount- Mounted on the wall Technical Details – Features- Unique Wall Plate Design Provides For Easier Installation Designed To Fit Single Standard Electrical Outlets Removable Design To Accommodate Areas Where Space Is Limited
Allows for simple installation
Diameter of the hole is approximately 1 inch. 1/2" X 1- 1/4"
Designed to fit a single standard electrical J-type connector Bracket for mounting a box or a low-voltage device
Color: White
Hdmi, Dvi, and Vga cables are all supported.
TOP 22

Keystone Wall Plate 8 Port

CableWholesale
301-8K-W
3.00 x 2.00 x 2.00 inches
0.12 pounds

Our Score

3.75

Product Features

Ease of Operation: You Can Rely On This Wallplate To Provide Great Results With Minimum Tools Whether You Are Setting Up A Network Or Phone Lines In Your Home Or Office, You Can Rely On This Wallplate To Provide Great Results With Minimum Tools.
For Professional And Clean Installations, Use This Wall Plate: Abs Body Is Made From A Strong, Shock-Resistant Material. Make your office or networking room look professional by keeping it clean, neat, and tidy. Using Network Wall Plates as a Source of Information. It eliminates clutter in the room by allowing you to install the jack directly through the wall plate rather than running cables across the floor.
Wide Application: Networking, home theater, audio/video systems, projectors, and general work areas are some examples of common applications. The Wall Plate does a good job of allowing for easy connection and aesthetic changes.
Guaranteed for life: On our cables, adaptors, and most of our products, we are proud to offer a lifetime warranty.
Observance: Compliant with Rohs.
TOP 23

Theater Solutions TSVCS White Wall Mount Impedance Matching Speaker Slide Volume Control Switch

Theater Solutions by Goldwood
3.50 x 3.00 x 4.50 inches

Our Score

3.7

Product Features

Adaptable - Independent Grounds Work With Any Amp And The Connections Take Wire Up To 14 Gauge, 12 Steps Of Attenuation With True First "Off" Position, Use With 4, 8, And 16Ohm Speakers And Handles 150 Watts Per Channel, Independent Grounds Work With Any Amp And The Connections Take Wire Up To 14 Gauge, 12 Steps Of Attenuation With True First "Off" Position
Volume Control for Speakers in Slides - Low Voltage Passive Design Is Simple To Install For Do-It-Yourselfers 3 color options with decorative white, almond, and ivory faceplates and knobs, whether you're a do-it-yourselfer or a professional.
What's Included In The Box - Use For Whole House Audio Systems, Business Or Retail Installations, 1 Theater Solutions By Goldwood Tsvcs Passive Slide Speaker Volume Control With Shorting Bars And Instruction Manual With Shorting Bar Reference Chart
System Requirements are a set of specifications that must be met in order for the system to Any home audio receiver or amplifier with raw speaker wire outputs, as well as Cl3-rated in-wall certified raw speaker wire for all connections.
Impedance Matching is a term that refers to the process of matching the impedance Shorting Bars Ensure The Proper Impedance Matches The Level Being Produced From Your Amp, Fits Most Deep Single Gang Electrical Junction Boxes With A Depth Of 3. Change The Shorting Bars Placement To Safely Connect To 8 Pairs Of 8Ohm Speakers, Shorting Bars Ensure The Proper Impedance Matches The Level Being Produced From Your Amp, Fits Most Deep Single Gang Electrical Junction Boxes With A Depth Of 3.