19 Of Best Drift Punches In 2024
TOP 1
Mayhew Pro 61360 3 Pc. Brass Drift Punch Set
Mayhew Tools
61360
10.50 x 3.75 x 1.00 inches
1.77 pounds
Our Score
Product Features
1/2-25076 Brass Drift Punch, 1 Inch
Includes: 3/4-25075 Knurled Brass Drift Punch Inch
It is packaged in a tray.
Type of Body: Round
3/8-25077 Brass Drift Punch, 1 Inch
TOP 2
Mayhew Pro 25077 3/8-Inch Knurled Brass Drift Punch
Mayhew Tools
25077
6.00 x 0.40 x 0.40 inches
0.20 pounds
Our Score
Product Features
Developed to Prevent Sparking
For Non-Profit Organizations Applications with a Negative Impact
Length in total: Inch
Made in the United States of America
Overall Length: 3/8" Body by 6" Overall Length: 3/8" Body by 6" Overall Length:
TOP 3
Proto J96B SET PUNCH DRIFT 5 PC
Proto
OMX5702
6.00 x 3.00 x 2.60 inches
2.20 pounds
Our Score
Product Features
Tip Type: Round
Sizes Included: 1/8, 3/16, 1/4, 5/16, and 7/32 are the sizes of the screws. Inch
Material: Steel that is alloyed
Made in the United States of America
Includes: Tool Roll with 5 Pockets
TOP 4
JDAMALEYWO Brass Drift Punch Set
JDAMALEYWO
Our Score
Product Features
Uses in Common: Steel, automobile repairs, oil, gas, chemical, and mining applications are all examples of aligning steel.
Drift Punch Set - Brass - 5 Pcs. Size Are: 3/4", 5/8", 1/2", 3/8",1/4", 3/4", 5/8", 1/2", 3/8",1/4", 3/4", 5/8",
To Remove Or Loosen A Part Or Pin, This Tool Is Used To Transfer The Force Of A Hammer Blow To A Specific Location.
Non- Non-marring/Marring Harder steel materials will not be harmed by sparking.
Durability, workability, and overall performance are all enhanced by the use of high-quality brass.
TOP 5
SK Hand Tool 6324 Drift Punch
SK Hand Tool
6324
8.00 x 0.75 x 0.75 inches
1.08 pounds
Our Score
Product Features
Origin: United States United States of America
Alignment of unhardened steel and aluminum
Number of Models: 6324
Package Dimensions of the Item: 0" L X 0. W X 0.75" H X 0.75" W X 0.75" H 75" H
TOP 6
Knurled Brass Drift Punch Set
Warhuntusa
Our Score
Product Features
1/4-inch Drift Punches are included. 3/8-inch-inch-inch-inch-inch-inch-inch-inch- 1/2-inch in diameter 5/8-inch-inch-inch-inch-inch-inch-inch-inch- inch, inch Inch
Durability, workability, and overall performance are all enhanced by the use of high-quality brass.
Uses in Common: Steel, automobile repairs, oil, gas, chemical, and mining applications are all examples of aligning steel.
TOP 7
Gray Tools 2 Piece Brass Punch Set
Gray Tools
C2BDS
8.50 x 3.50 x 1.00 inches
1.55 pounds
Our Score
Product Features
The knurled body gives you a better grip and hold.
2 Brass Drift Punches are included in the set: 3/4" Diameter X 8" Length and 1/2" Diameter X 7" Length
Made in the United States of America.
A Limited Lifetime Warranty is included.
It's Perfect For Non-Profit Organizations In the automotive industry, as well as the oil, gas, chemical, and mining industries, there are a variety of applications that can be found.
TOP 8
Groz 25809 7-Piece Drift Punch Set
Groz
25809
Our Score
Product Features
For Longer Working Life, Accurately Hardened And Tempered
Made of high-quality carbon steel and constructed in a single piece.
Set of 7 Drift Punches, 1/8", 5/32", 3/16", 7/32", 1/4", 5/16", 1/8", 5/16", 1/8", 5/16", 1/8", 5/16", 1/8", 5/16", 1/8", 5/16", 1/8", 5/16", 1/8", Vinyl Pouch is used to package the item.
Working Edges that have been machine ground
Ideal For Drawing Pins Through Various Assemblies And Lining Up Holes In Metal Pieces
TOP 9
GEARWRENCH 3/8" x 6" Brass Drift Punch
GEARWRENCH
70-294G
6.00 x 0.38 x 0.38 inches
Our Score
Product Features
The Non-Sparking Design Is Ideal For Heavy-Duty Applications. Duty Work in Mines or Explosive Environments With Dangerous Sparks
The non-marring design is ideal for delivering powerful blows while avoiding damage to the work surface.
Made in the United States of America
Flat tip can be used to install or remove pins and shafts, as well as to align holes in multiple pieces.
TOP 10
Solid Brass Drift Punch 3/4" x 8" Hand Punch
AK Garage
1.53 pounds
Our Score
Product Features
Developed to Prevent Sparking
For Non-Profit Organizations Applications with a Negative Impact
3/4" X 8" is the size of the piece.
Designed to not mar steel and made of consumable brass.
TOP 11
K Tool International KTI72975 Drift Brass Punch
K Tool International
KTI72975
13.30 x 2.00 x 1.00 inches
0.75 pounds
Our Score
Product Features
Diameter of the punch: 3/4 inch (19 millimeter)
Features and Advantages: Length: 3/4 inch (147 millimeters)
Guaranteed for life
Components that are included: Drift Punches are a type of hand tool that is used to make drifts.
TOP 12
Blacksmith Drift Set Blacksmithing Knifemakers Tomahawk Ax and Mouse Hammer Drift
Hihitomorrow
12.20 x 4.33 x 1.57 inches
Our Score
Product Features
This is a three-piece drift set. Picture 3 shows the size of the drift.
Drilling A Series Of Small Holes To Handle Hand-Made Hammers, Axes, Or Tomahawks, Etc. is a task assigned to blacksmiths. Once the holes are drilled, heat the item and split it with a cold chisel or similar tool. After the piece has been split, reheat it and drive the drift through the hole. Continue to drive the Drift into the workpiece while tapping the sides of the workpiece until the Drift Hole reaches the desired measurement. To achieve the desired shape, the heating process may be repeated several times.
The Drifts are lightly sanded with 60-grit sandpaper. Grit To Provide A Smooth Drifting Operation With A Reverse Taper On The Struck End To Allow Them To Fall Through The Stock When Drifting.
Made of High-Quality Materials Steel of high quality that is both strong and long lasting.
If the Drifts ever bend, simply heat them to a low temperature, straighten them with light hammer blows, and let them cool in the air.
TOP 13
Stanley Proto J9634HB Proto 3/4" x 12" Brass Drift Punch
Proto
J9634HB
12.00 x 0.75 x 0.75 inches
1.65 pounds
Our Score
Product Features
Designed to help protect the object being struck from being damaged.
Spark- Mar-resistant is a word that comes to mind when you think of resistance Resistant
Drift Punch made of brass
3/4- Width of the tip in inches
Overall length is in inches, and it is made in the United States.
TOP 14
GEARWRENCH Brass Drift Punch Set 3 Pc.- 70-545G
GEARWRENCH
70-545G
11.45 x 3.95 x 0.85 inches
1.00 pounds
Our Score
Product Features
Non- The Use of a Sparkly Design Is Ideal For Heavy-Duty Applications Duty Work in Mines or Explosive Environments With Dangerous Sparks
The non-marring design is ideal for delivering powerful blows while avoiding damage to the work surface.
Made in the United States of America
Installing or removing pins and shafts, as well as aligning holes in multiple pieces, can all be done with the flat tip.
TOP 15
Dasco Pro 606 Drift Punch
Dasco Pro
0606-0
16.00 x 4.00 x 2.00 inches
0.50 pounds
Our Score
Product Features
The item is made in the United States of America.
Heat-resistant, wide utility punch with complete taper Treated
This product satisfies the needs of the customer.
TOP 16
Dasco 603 3/16-Inch by 8-Inch Drift Punch
DASCO
9.00 x 0.19 x 0.19 inches
0.35 pounds
Our Score
Product Features
To Assist In Aligning And Sizing Holes In Various Materials, This Tool Has A Long, Tapered Point.
Length in Inches
Made in the United States of America
Eye protection should always be worn.
TOP 17
Armstrong 70-197 1/4-Inch by 5/8-Inch by 12-Inch Drift Punch
Armstrong
70-197
10.97 x 0.63 x 0.63 inches
0.65 pounds
Our Score
Product Features
For strength and durability, it is made of high-alloy steel.
'Made in the USA' is a phrase that means "made in the United States The Availability Of Quality
For Strength And Durability, It Has Been Heat Treated
TOP 18
Proto Drift Punch Set, Not Tether Capable
Proto
J96A
4.00 pounds
Our Score
Product Features
The following sizes are included: 3/32", 1/8", 3/16", 1/4", 5/16", 3/8", 3/32", 1/8", 1/8", 1/8", 1/8", 1/8", 1/8", 1/8", 1/8 Features: The tool has a black oxide finish and a polished identification panel with the tool number and size.
TOP 19
Pro 61360 Hand Tool Brass Drift Punch Set 3/4-Inch 1/2-Inch 3/8-Inch 3/4-In 1/2-In 3/8-In 3/4'' 1/2'' 3/8'' Replaces 25075 25076 25077 3 Pc
Jofynzo
Our Score
Product Features
Uses in Common: Steel, oil, gas, chemical, auto repair, and mining applications are all aligned.
ncluding Package: ncluding Package: ncluding 1 25075 3/4-Inch Knurled Brass Drift Punch, 1 25076 1/2-Inch Brass Drift Punch, and 1 25077 3/8-Inch Brass Drift Punch
Usage: To Remove Or Loosen A Part Or Pin, This Tool Is Used To Transfer The Force Of A Hammer Blow To A Specific Location. Non- Non-marring/Marring Harder steel materials will not be harmed by sparking.
Matrial: Durability, workability, and overall performance are all enhanced by the use of high-quality brass.
Ensure: Please do not hesitate to contact us if there is a problem with the product; we will gladly assist you in resolving the issue.