24 Of Best Flexible Electrical Conduit Fittings In 2024
TOP 1
Sealproof Non-metallic Liquid-Tight Conduit and Connector Kit, 1-Inch 25 Foot Flexible Electrical Conduit Type B
Sealproof
7.03 pounds
Our Score
Product Features
Corrosion, abrasion, oil, water, acid, metal shavings, and harsh environments are all resistant to this material. Abuse, yanking, and crushing are all things that this dog will not succumb to. Direct Burial, Outdoor, Sunlight Resistant
Made in the United States of America. Sealproof Straight Or Right Angle Connectors are recommended. Any Type B Mettalic Or Nonmettalic Conduit Connectors Can Be Used With It. 50% Lighter Than Metallic Conduits With No Sharp Edges Or Burrs
Underwriters Laboratories File No. Ul Listed 129973; Rating: ULTIMATE When it's dry, it's 80 degrees, and when it's wet, it's 60 degrees Oil Resistant to 70°C. Candian Standards Association File No. Csa Certified, Csa Certified Ll- Csa Rating - 84705, 84705, 84705, 84705, 84705, 84705, 8 Between 18 and 75 degrees Fahrenheit
Made from virgin PVC of the highest quality. Smooth inside for easier wire pulling, no sharp edges or burrs to cause injury, and will not damage conductors. Quick Installation, Cuts With A Utility Knife Or A Pvc Cutter, Lightweight And Low Installed Cost Rigid Integral
Applications include: Pumps, Refrigeration Equipment, Transformer Connections, Outdoor Lighting, Hvac Equipment, Machine Tools, Marine Equipment, Motors And Controls, Printing Equipment, Pumps, Refrigeration Equipment, Transformer Connections
TOP 2
Liquid Tight Connector 1-in 90 Degree, Type B Flexible Non-Metallic Electrical Conduit Connector Fitting
FirmiBang
Our Score
Product Features
Simple to set up - The Firmibang Flexible Conduit Connector is easy to use and requires no tools to install. By pressing the conduit or pipe into the ferrule, you can tighten the dome sealing nut.
Quality Assurance – Liquid Tight Connectors are made of high-quality materials. Impact PVC with a 94V flammability rating 2. The temperature index is 125 degrees Celsius. Resistant to Rust and Corrosion
A Wide Range of Applications - Indoor Or Outdoor Use Is Possible With This Electrical Conduit Connector. Connects Type B Non-Positive Non-Positive Non Liquid Metal - Conduits to weatherproof outlet boxes, motors for pool and spa equipment, and central air conditioning Various electrical enclosures and hubs, as well as conditioning units.
Package - A Locknut and a Sealing Washer are included with each connector. There are a variety of liquid-based models available. To Meet Your Various Needs, Tight Connectors
After- Guaranteed Sales – Please do not hesitate to contact us if you have any questions about our Liquid Tight Connectors. We'll get back to you as quickly as we can.
TOP 3
Halex, 1/2 in. Flexible Metal Conduit Screw-In Connector
Halex
20440
1.00 x 5.00 x 7.00 inches
0.23 pounds
Our Score
Product Features
Zinc Alloy Construction with High Strength
Fmc is connected to steel outlet boxes and other metal enclosures.
It's Only For Indoor Use With A Standard 1/2 In. Knockout
Corrosion Resistant is a term used to describe materials that are resistant to corrosion.
TOP 4
Carlon 1in Pvc Flex Conduit Elbow
Carlon
UAFAF
7.00 x 2.00 x 4.00 inches
0.45 pounds
Our Score
Product Features
Type of Conduit: Flexible
Angle: 90 Deg
Material: Pvc
Length: 13/4 In
It's OK to use it both inside and outside.
TOP 5
3/4 Npt Nonmetallic Liquid-Tight 180-Degree Electrical Conduit Connector Fitting
YXX-TECH
Our Score
Product Features
The installer can simply tighten the Dome Sealing Nut by pushing the conduit or pipe onto the ferrule, eliminating the need for disassembly and simplifying wire installation.
These Non-Profit Organizations Metallic connectors are made of Nylon 6 type, which has a flammability rating of 94V-0. 125 degrees Celsius is the temperature index.
Complete Conduit / Connector System Reusable, Rings And Steel Locknuts For Indoor And Outdoor Use
Salt water, weak acids, gasoline, alcohol, oil, grease, and common solvents are all resistant to metal connectors.
Applications include: Equipment for heating and cooling Tools for the Machine Shop; Equipment for the Sea Motors and Controls are two types of machines that are used to move things around. Machines for printing; Pumps; Equipment for Refrigeration; Connection to the transformer; Lighting for the Outside
TOP 6
PVC Conduit Flexible Connector 3/4"
Carlon
GIDDS-626745
10.00 x 2.00 x 2.00 inches
0.10 pounds
Our Score
Product Features
The Product Is Extremely Long-Lasting
It Is a Good Product To Use
Made in the United States
TOP 7
Sealproof 1/2-Inch 10 Pack Non-metallic Liquid-Tight 90-Degree Conduit Connector Fitting
Sealproof
5.25 x 3.81 x 4.00 inches
0.71 pounds
Our Score
Product Features
There's no need to take it apart. Instead, the installer simply presses the conduit or tubing against the ferrule and tightens the domed sealing nut. The Locknut can then be used to secure the completed assembly in the chassis (or the connector can be secured into an Npt threaded hole first).
Salt water, weak acids, gasoline, alcohol, oil, grease, and common solvents are all resistant to the Nylon construction. Nylon 6 is a type of nylon that has been molded. 94V- 94V- 94V- 94V- 94V- 94V- 125 degrees Celsius is the temperature index.
It's suitable for both indoor and outdoor use. Original Equipment Manufacturers (OEMs) and Field Installers Included are a 0 ring as well as a steel locknut.
There is no need to thread the conduit or tubing during installation, removing the risk of cutting the conduit and creating leak paths. Applications include: Equipment for heating and cooling Tools for the Machine Shop; Equipment for the Sea Motors and Controls are two types of machines that are used to move things around. Machines for printing; Pumps; Equipment for Refrigeration; Connections between transformers; Lighting for the Outside
It is possible to reuse the entire conduit/connector system. During assembly, the conduit will not wind tightly onto the connector and can be easily removed by pulling while turning clockwise.
TOP 8
ISPINNER 4pcs NPT 1/2" Nonmetallic Liquid Tight 90 Degree Electrical Conduit Connector Fittings
ISPINNER
Our Score
Product Features
Dimensions 4 Pack Npt 1/2 Inch Npt Npt Npt Npt Npt Np
Exceptional quality - These Liquid Tight Conduit Connector Fittings are made of high-quality nylon that can withstand salt water, weak acids, gasoline, alcohol, oil, grease, and other common solvents. 94V- flammability rating 1. The temperature index is 125 degrees Fahrenheit.
Wide Range of Use - It can be used for a variety of applications, including machine tools, marine equipment, motors and controls, printing equipment, pumps, refrigeration, transformer connections, and outdoor lighting.
Package - Each connector comes with an O-ring as standard. The ring and the locknut.
Simple to Work With - No disassembly is required; simply push the conduit or tubing onto the ferrule and tighten the domed sealing nut.
TOP 9
1/2 Inch Nonmetallic Liquid Tight Straight Electrical Conduit Conector Fitting
SLAIR
Our Score
Product Features
Performing Arts: 94V- 94V- 94V- 94V- 94V- 94V- 125 degrees Celsius is the temperature index.
Material: Seawater, gasoline, alcohol, grease, and other chemicals are all resistant to nylon.
Installation Instructions: No disassembly is required; simply push the conduit or tubing onto the ferrule and tighten the domed sealing nut.
Authentication: Ul / Csa
In this case, It can be used both indoors and outdoors. Included are an O ring and a stainless steel locknut.
TOP 10
1 Inch 90 Degree Nonmetallic Liquid Tight Electrical Conduit Conector Fitting
SLAIR
Our Score
Product Features
Performing Arts: 94V- 94V- 94V- 94V- 94V- 94V- 125 degrees Celsius is the temperature index.
Material: Seawater, gasoline, alcohol, grease, and other chemicals are all resistant to nylon.
Installation Instructions: No disassembly is required; simply push the conduit or tubing onto the ferrule and tighten the domed sealing nut.
Authentication: Ul / Csa
In this case, It can be used both indoors and outdoors. Included are an O ring and a stainless steel locknut.
TOP 11
Sealproof 1/2-Inch Non-metallic Liquid Tight Straight Electrical Conduit Connector Fitting
Sealproof
8.25 x 6.00 x 1.25 inches
0.15 pounds
Our Score
Product Features
There's no need to take it apart. Instead, the installer simply presses the conduit or tubing against the ferrule and tightens the domed sealing nut. The Locknut can then be used to secure the completed assembly in the chassis (or the connector can be secured into an Npt threaded hole first).
Salt water, weak acids, gasoline, alcohol, oil, grease, and common solvents are all resistant to the Nylon construction. Nylon 6 is a type of nylon that has been molded. 94V- 94V- 94V- 94V- 94V- 94V- 125 degrees Celsius is the temperature index.
It's suitable for both indoor and outdoor use. Original Equipment Manufacturers (OEMs) and Field Installers Included are a 0 ring as well as a steel locknut.
There is no need to thread the conduit or tubing during installation, removing the risk of cutting the conduit and creating leak paths. Applications include: Equipment for heating and cooling Tools for the Machine Shop; Equipment for the Sea Motors and Controls are two types of machines that are used to move things around. Machines for printing; Pumps; Equipment for Refrigeration; Connections between transformers; Lighting for the Outside
It is possible to reuse the entire conduit/connector system. During assembly, the conduit will not wind tightly onto the connector and can be easily removed by pulling while turning clockwise.
TOP 12
Qty of 5-1" Dia. - Non Metallic Electrical Liquid Tight Conduit Straight Fittings
HYDROMAXX
Our Score
Product Features
Internal Surfaces That Make Wire Installation Easier
Non- Straight Nylon Electrical Liquid Tight Conduit Fittings in Metallic Nylon
During the assembly process, the conduit will not be tightly wound onto the connector.
For both indoor and outdoor use, an O ring and a steel locknut are included.
No threading of conduit is required for installation, and there is no disassembly (just push tubing onto fitting).
TOP 13
Gardner Bender GCC-120 1/2-Inch Two Hole Plastic Straps
Gardner Bender
GCC-120
1.00 x 2.25 x 0.50 inches
0.05 pounds
Our Score
Product Features
UV rays don't harm it, and it won't break if you put it in the freezer.
Allows for the secure attachment of plastic electrical conduit, Schedule 40 PVC, copper tubing, and other similar materials.
Polyethylene, Heavy Duty
The size of the diameter is. 840"
a bag of twenty
1/2- Inch
TOP 14
Southwire 3/4-in 90 Degree Liquid-Tight Connector
Southwire
58133901
1.00 x 0.75 x 1.00 inches
Our Score
Product Features
the name of the brand Southwire
Superior Tight Liquid Sealing And Pulling Strength
Dimensions of the product 0 X 0. 75 X 1.
Origin: United States China
TOP 15
Gardner Bender GCC-220 3/4-Inch Plastic Conduit Strap
Gardner Bender
GCC-220
1.25 x 2.50 x 0.50 inches
0.05 pounds
Our Score
Product Features
UV rays don't harm it, and it won't break if you put it in the freezer.
Allows for the secure attachment of plastic electrical conduit, Schedule 40 PVC, copper tubing, and other similar materials.
Conduit, pipe, tube, or bundles with a diameter of up to 3/4 inch (19mm) are secured.
Polyethylene, Heavy Duty
The size of the diameter is one.
a bag of twenty
TOP 16
Fuzbaxy10pcs 1/2" Nonmetallic NPT Liquid Tight Connector 90 Degree Electrical Conduit Connector Fitting
Fuzbaxy
Our Score
Product Features
Material: The liquid Tight Connector is made of high-quality nylon that is resistant to salt water, mild acids, alcohol, oil, grease, and common solvents.
Dimensions The Npt 1/2 Liquid Tight Connector comes in a pack of ten.
Widely UsedNice Tight Fit For Outdoor Electrical Box, Marine Equipment, Motors And Controls, Printing Equipment, Pumps, Refrigeration, Transformer Connection, Outdoor Lighting, and Other Applications
Features: Excel Lent Design Claws And Seals Can Hold Cable Firmly And Have A Wider Cable Range.
Installing Is Simple: They are simple to attach to the box and secure to the flex conduit. There is no need for disassembly; simply push the conduit or tubing onto the ferrule and tighten the domed sealing nut.
TOP 17
Liquid Tight flex Connector 1/2" 25 Pack
KDDindustries
LT12STRAIGHT
Our Score
Product Features
High- PVC Construction with an Impact
Connects Type B Non-Positive Non-Positive Non Liquid Metal - Conduits to weatherproof outlet boxes, motors for pool and spa equipment, and central air conditioning Various electrical enclosures and hubs, as well as conditioning units
Resistant to Rust and Corrosion
TOP 18
ProConnex AMC-50 BX/Flex MC/Connector
YXX-TECH
Our Score
Product Features
* For 14/2 Aluminum Or Steel - 3/8-inch ac and mc, as well as 10/3-inch ac and mc Fmc/Rwfmc is a combination of Fmc and Rwfmc.
* Ac, Mc, Or Fmc/Rwfmc Is Terminated To A 1/2- With No Tools Required in Knockout
* Zinc Dietary Supplement Wire protection is provided by a cast construction with an insulated throat.
* Is Culus Listed On This Product?
* Please contact us via email if you are not satisfied with your purchase of our connector products.
TOP 19
Sigma Electric ProConnex 1902 EMT One-Hole Strap 3/4-Inch
Sigma Electric
1902
1.90 x 0.63 x 0.91 inches
1.50 pounds
Our Score
Product Features
Meets the requirements of the National Electric Code (Nec).
3/4-inch thick Emt Conduit is a fictional character who appears in the film Emt Condu
Steel with a Zinc-Plated Finish
Snap- To Make Installation Simple, Use Type
TOP 20
1-in Liquid-Tight Connector
Southwire
58308157
1.00 x 1.00 x 1.00 inches
Our Score
Product Features
Assembly Is Simple, Quick, And Easy
Superior Tight Liquid Sealing And Pulling Strength
It can be used both indoors and outdoors.
Wire Installation Made Easier With Smooth Interior Surfaces
Reusable
There is no need to thread the conduit or tubing.
Steel Locknut and Seal Gasket are included in the package.
TOP 21
Clamp Type Connector 1/2 Inches and 3/4 Inches Cable Connector Clamp Cable Connector
Fiada
Our Score
Product Features
Material that is long lasting: Wire Connectors Are Made Of Zinc Alloy Material, Which Is Rust-Resistant, Durable, And Practical. They Can Be Used For A Long Time After Heat Treatment, And They Come With A Corrosion-Resistant Finish. Zinc Diet with Resistant Zinc Structure made of cast iron
Quantities in a Variety of Sizes: There are four pieces, each measuring 4 1/2 inches by 4 1/2 inches by 4 1/2 inches by 4 1/2 inches by Inch, as well as four 3/4-inch pieces. Inch Cable Connectors Are Included In The Package, Enough To Meet Your Replacement And Use Needs In Daily Work, As Well As Better Cooperation With You To Complete The Work
Metal Structure: Sturdy and durable. The Metal Structure Of The Cable Connector Kit Ensures Mechanical Protection Of The Raceway, Protects Your Wires From Damage, And Prevents Leakage Hazards, Safe And Sturdy
Information on the size: The Cable Connector Clamp Is About 1/2 Inch And 3/4 Inch, Please Check To See If It Meets Your Daily Work And Cooperation Needs Before Purchasing To Avoid Making A Mistake.
Design of the Screw Strap: Clip- 650Xy2 Two screw straps and flexible conduit ftgs are found on the connector. It Is Not A Metal Cable, But It Is A Service Entrance Cable Accessory; The diameter of the cable is 14 AWG, and the shooting distance is between 1/2 and 3/4 inch.
TOP 22
Fuzbaxy 12pcs 1/2Inch Clamp Type Cable Connectors
Fuzbaxy
Our Score
Product Features
Color: Silver; Quantity: 12 Pack.
Material: Alloy of Zinc; 1/2 inch in diameter.
The Wire Connector Is Made Of A Corrosion-Resistant Zinc Alloy Material That Is Not Easy To Rust, Is Durable And Practical, Can Be Used For A Long Time After Heat Treatment, And Has A Corrosion-Resistant Surface. Zinc Diet with Resistant Zinc The structure is made of concrete.
The Squeeze Connector works perfectly with 14/2 and 12/2 Romex (Nm Cable) as well as the Knockout.
Punch-In 1/2" Squeeze Connector For Standard 1/2" Electrical Boxes Out.
TOP 23
Southwire LTNM-CP-050 1/2" Liquid Tight Non-Metallic Push Install LT Coupling
Southwire
LTNM-CP-050
1.42 x 1.42 x 2.33 inches
0.07 pounds
Our Score
Product Features
Push-Button Control Is Simple And Quick Liquid Tight Conduit Fittings should be installed.
Simpush Fittings are removable and reusable, and they install quickly and without tools by simply pushing the fitting onto the conduit.
Works With Non-Profit Organizations Type B Liquid Tight Conduit, Metallic
Ip66 and Nema 4X
UV-protected materials were used to create this product. Resin that is resistant to chemicals
TOP 24
Lamson UA9ADB-CAR Carlon Schedule 40 90-Degree Elbow
Carlon
UA9ADB-CAR
8.50 x 0.75 x 0.75 inches
0.25 pounds
Our Score
Product Features
The Product Is Extremely Long-Lasting
It Is a Good Product To Use
Made in the United States