25 Of Best Electrical Fuse Blocks In 2024
TOP 1
6 Circuit Fuse Block W/Negative Bus
JOYHO
JH51693-6B
1.97 x 4.80 x 1.97 inches
Our Score
Product Features
Exceptional Quality: This Fuse Holder Is Made Of Environment Fire-Resistant Nylon Material And Meets All The Standards Of An Ideal Fuse Box. It is strong mechanically, insulated, heat resistant, and flame resistant. There is unlikely to be any problems such as fracture, deformation, combustion, or a short circuit.
Suitable for your vehicle: This Premium Fuse Box With Bus Bar Is Required For All Vehicles Equipped With A 10-Amp Alternator. It's a 32-volt DC power source that can be used in any car or boat.
Setup Time: 5 minutes You don't have to be concerned about getting your fuse box ready to use. This six-circuit fuse box is simple to set up.
Labels for the names of the appliances are as follows: There are 70 extra electric device name labels included in the package. You'll be able to figure out which appliance is malfunctioning in a matter of seconds.
1 Year Limited Warranty: A One-Year Warranty Is Included With This Fuse Block With Ground. Warranty is for a year. Simply contact us for a replacement if the part ever fails on your truck, suv, rv, atv, utv, or boat.
TOP 2
Blue Sea Systems 5035 / Blue Sea 5035 ST Blade Fuse Block w/Cover
Generic
CECOMINOD039212
8.00 x 4.00 x 2.00 inches
0.40 pounds
Our Score
Product Features
Provides Outstanding Savings While Providing Premium Quality
With This High-Quality Product, You Get More For Your Money
Product is excellent.
100% Affidavit of Affidavit%
TOP 3
Blue Sea Systems ANL Fuse Block
Blue Sea Systems
5005
1.50 x 6.00 x 9.00 inches
0.26 pounds
Our Score
Product Features
The product comes in an 8-inch package height.
Origin: United States United States of America
The package has a 9-inch width to it.
The product comes in a ten-inch-long package.
TOP 4
Painless Performance 70207 Weatherproof Cirkit Boss Auxiliary Fuse Block
Painless
70207
7.00 x 3.25 x 7.50 inches
1.58 pounds
Our Score
Product Features
With both constant and ignition hot circuits, the first circuit isolator system is available.
Any Vehicle's Electrical Accessories Can Be Installed In A Safe Way
Three 20-minute sessions are included. With a maximum total amperage handling of 40 amps, there are four constant hot circuits and four ignition hot circuits.
Protects your original equipment manufacturer (OEM) and is simple to install
Includes: 40-year weatherproof guarantee 50-Amp Spst Relay, Weatherproof 50-Amp Spst Relay, Weatherproof 50-Amp Spst Weatherproof Relay Base/Fuse Block With Harness, Weatherproof Crimp-On Relay Base/Fuse Block With Harness, Weatherproof Crimp-On Relay Base/Fuse Block With Harness, Weatherproof Crimp-On Relay On Heat- Terminals that can be shrunk, a weatherproof fuse block cover, and mounting hardware
TOP 5
Blue Sea Systems-5503 ANL 35A to 750A Fuse Block
Blue Sea Systems
5503
3.00 x 9.00 x 7.25 inches
Our Score
Product Features
5/16" (M8) Ring Terminals are accepted.
This book has a cover.
Stainless steel studs are corrosion resistant and have a high torque rating for excellent electrical contact.
4/0 Awg is the maximum cable size.
For use on systems with a DC voltage of up to 32 volts
Material of foundation: Polycarbonate with reinforcements
TOP 6
Seachoice 13441 6-Gang Fuse and Terminal Block
SEACHOICE
13441
17.80 x 9.20 x 6.00 inches
0.25 pounds
Our Score
Product Features
Corrosion-resistant brass clips and contacts
Heavy- Molded Base for Heavy Duty Applications
4-inches tall 1/2 Inch Long X 3 Inch Wide 3/4 Inch High X 1/4 Inch Wide
There is one 8-foot buss bar for each buss bar. 2 Hex Nuts For A 32 X 3/4 Inch Stud
Accepts Sfe 20 amp or 3Ag series fusibles.
TOP 7
Blue Sea Systems - 5015 Fuse Block AGC 6-CIR W/Ground
Blue Sea Systems
5015
2.00 x 4.00 x 8.00 inches
0.54 pounds
Our Score
Product Features
Weight of the package 55 Pounds
Dimensions of the package 064 inches tall by 18 inches wide 034 L X 9 is a number that can be used to describe the size of (In Centimeters) 398 W
Labeling, spare fuse storage, and easy fuse removal are all possible thanks to the innovative design.
Large Format Labels Can Be Accepted With A Clear Insulating Cover With Label Recesses
TOP 8
SEACHOICE 13301 ATO/ATC Fuse Block 6 Gang
SEACHOICE
13301
9.00 x 17.00 x 5.00 inches
Our Score
Product Features
Heavy-Duty Construction Intended For Marine Use
The 6 Gang Ato/Atc Fuse Block has superior functionality and allows for quick replacement of blown fuses.
Size: 3- 3/4 in. x 3 in. 5/16" x 13/16"
Rating: 30 amps at 12 volts dc
Ground Bar on a Black Plastic Molded Base
TOP 9
Sierra International FS40520-1 Standard Fuse Block
Sierra International
FS40520-1
1.50 x 3.06 x 9.06 inches
0.05 pounds
Our Score
Product Features
Package Dimensions of the Item: 555 centimeters long by seven centimeters wide The dimensions are 62 centimeters wide by 20 centimeters long. 574 centimeters x 574 centimeters x 574 centimeter
Type of product: Block at the end
Package Quantity: Item Package Quantity: Item Package Quantity: Item Package
Origin: United States United States of America
TOP 10
Pico 1598D Electrical Wiring Brass ATO Fuse Block Terminal 5 Per Package
Pico
1598
0.13 pounds
Our Score
Product Features
0910 Fuse Block is recommended for use.
Fuse Block Terminal for Ato
5 pieces per package
TOP 11
DC Power Fuse Distribution Strip Module
OONO
Our Score
Product Features
Pitch of the input terminals is 7. 62Mm/0. Maximum Current 30 Amps Per Position, Wire Size 2610 Awg, Stripping Length 8Mm, Metric M3 Slotted Screw, 3" Connect To Other Modules To Support Power Supply Expansion
Dc 0 to 32V working voltage 30 Amps is the maximum total input current. 6 output channels, each with a maximum output current of 3 amps (factory-installed) You can replace the fuse to support up to 10 amps if the installed fuse value is 3 amps.
Pitch Pitch Pitch Pitch Pitch Pitch Pitch Pitch Pitch Pitch P 0Mm/0. Metric M2, 197", Wire Size 2612 Awg, Stripping Length 7Mm Screw with five slots
Fuse Holders For Ato/Atc Medium Blade Fuse, The Fuse Can Be Removed And Replaced Easily. With the Fuse Fail Indication function, when you connect a load and the fuse blows or is unplugged, the Fail Indication Led will illuminate.
Pcb with 4 dual copper layers made of fiberglass. Din Rail Mount Carrier, High Quality Taiwan Dinkle Fireproof Nylon Material (Not China Low Quality Carrier), Can Support Rail Width 35Mm.
TOP 12
Electronics-Salon Panel Mount 10 Position Power Distribution Fuse Module Board
Electronics-Salon
Our Score
Product Features
Voltage Required for Work: Total Current Rating: 40Amp, Ac Or Dc 532V. The following are the measurements: The dimensions are 150 x 72 millimeters. (W X L X H): 5 mm x 29 mm
Fuse Module Board for Panel Mounted Power Distribution.
1 To P2- The following are the ten output terminals: Pitch - 5Mm/0. Maximum Current 10A For Each Position, Wire Size 2612 Awg, Stripping Length 7Mm, Metric M2. 295", Maximum Current 10A For Each Position, Wire Size 2612 Awg, Stripping Length 7Mm, Metric M2. Screw with five slots
P1 Terminals for Output: Pitch - 08Mm/0. 2", 10A maximum current per position, wire size 2612 Awg, 7Mm stripping length, Metric M2. Screw with five slots
Terminals for supplying information: Pitch - 62Mm/0. 3" Current 30A Per Position, Wire Size 2610 Awg, Stripping Length 8Mm, Metric M3 Slotted Screw
TOP 13
Recoil BB38R Busbar 3 x 3/8” Studs and 8 x #8 Screw Terminals Power Distribution Block
RECOIL
Our Score
Product Features
To protect against accidental short circuits, a reinforced polycarbonate cover is attached with nylon nuts.
Red Busbar With 3 X 3/8" Stainless Steel Studs And 8 X 8 Stainless Steel Screws From Eleven Connections. 3 X 8Awg 3/8 Insulated Ring Terminals and 8 X 8 Insulated Ring Terminals are included.
Nickel Plated Brass Plate Has A Low Resistance, High Conductivity, And Corrosion Resistance. Made of tough polycarbonate plastic for long-lasting strength and durability in even the harshest conditions.
Voltage at Maximum: The voltage is 300 volts alternating current (AC) and 48 volts alternating current (DC). Continuous Amperage Maximum (maximum): 130 amps ac, 150 amps dc
Any installation in your boat, car, or caravan will have a neat and clean finish.
TOP 14
Mersen MPDB63133 Alum Pwr-Dist Block 3P
Mersen
MPDB63133
6.75 x 3.13 x 2.88 inches
0.50 pounds
Our Score
Product Features
Termination of Cables
Mini Box To Box Power Distribution Block In An Open Style With Three Outlets 4 studs and a pole
Standard
It does this by dividing primary power into a number of secondary circuits or by providing a fixed junction tap-in. Off Point
Glass-free insulators are virtually unbreakable. Polycarbonate that has been filled
Allow You To Splice Cables In A Safe And Convenient Way
600 V
3 Pole
185 ohms (Csa), 195 ohms (Ul)
Per pole, there is one primary opening.
TOP 15
Blue Sea Systems 100-300A MEGA/AMG Fuse Block
Blue Sea Systems
5001
1.50 x 6.00 x 9.00 inches
0.15 pounds
Our Score
Product Features
The Abyc/USCG Insulation Requirements are met by the Insulating Cover.
5/16" (M8) Ring Terminals are accepted.
Stainless steel studs are corrosion resistant and have a high torque rating for excellent electrical contact.
Breakouts in the insulating cover allow wire access in three directions.
To ensure secure fuse mounting, use molded studs.
TOP 16
Electronics-Salon Panel Mount 10 Position Power Distribution Fuse Module Board
Electronics-Salon
Our Score
Product Features
Voltage Required for Work: Total Current Rating: 40Amp, Ac Or Dc 548V. The following are the measurements: The dimensions are 150 x 72 millimeters. (W X L X H): 5 mm x 29 mm
Fuse Module Board for Panel Mounted Power Distribution.
1 To P2- The following are the ten output terminals: Pitch - 5Mm/0. Maximum Current: 6; Maximum Length: 295; Maximum Length: 2 3A per position, 2612 Awg wire, 7mm stripping length, Metric M2. Screw with five slots
P1 Terminals for Output: Pitch - 08Mm/0. 2", 10A maximum current per position, wire size 2612 Awg, 7Mm stripping length, Metric M2. Screw with five slots
Terminals for supplying information: Pitch - 62Mm/0. 3" Current 30A Per Position, Wire Size 2610 Awg, Stripping Length 8Mm, Metric M3 Slotted Screw
TOP 17
EZGO 35211G01 6 Position ATC Fuse Block
E-Z-GO
35211G01
2.50 x 3.50 x 1.00 inches
0.15 pounds
Our Score
Product Features
Fits Between 1998 and 2000 a total of 25 cars
Fuse Block is on the move!
Designed in the United States
Fuse Block with 6 Positions (Atc)
TOP 18
Square D 9080-PF-1 Fuse Block 9080PF1
Square D
1.00 x 1.00 x 1.00 inches
0.50 pounds
Our Score
Product Features
Vac: 250
Amps:
TOP 19
Blue Sea Systems Fuse Block MIDI
Blue Sea Systems
7720
8.00 x 4.00 x 2.00 inches
0.33 pounds
Our Score
Product Features
Fuses are protected from the harsh marine environment by a sealed cover.
Ignition Protected Ignition For Use On Gasoline Or Diesel-Powered Boats
The Abyc/USCG Insulation Requirements are met by the Insulating Cover.
TOP 20
Blue Sea Systems 7725 Safety HUB Fuse Block 100 RBS
Blue Sea Systems
7725
9.00 x 4.30 x 11.50 inches
1.00 pounds
Our Score
Product Features
Three 30A-rated 200A Midi/Ami Fuses are ideal for high-voltage applications. Panel feeds, windlasses, and stereo amplifier circuits are all examples of amp circuits.
An Ignition-Protected Fuse Block And An Integrated Connecting Plug are combined in this product.
Reduces wiring connections and consolidates up to seven fused circuits, making it safe for use on gasoline-powered boats.
Four 1A- Fuses for 200A Ato/Atc- Circuits such as bilge pumps, alarms, and clock memory are all good candidates.
TOP 21
LITTELFUSE L60030M-3PQ Midget Fuse Block
Littelfuse
L60030M3PQ
36.00 x 24.00 x 24.00 inches
0.04 pounds
Our Score
Product Features
600V Ac
30 Amp
Accessory for the Panel
Fuse Block for Midgets with Pressure Plate Terminal
Holder for a fuse
TOP 22
Blue Sea Systems 7721 Fuse Block Safety SEA/AMG
Blue Sea Systems
7721
7.75 x 4.00 x 2.00 inches
0.50 pounds
Our Score
Product Features
Fuses are protected from the harsh marine environment by a sealed cover.
Ignition Protected Ignition For Use On Gasoline Or Diesel-Powered Boats
The Abyc/USCG Insulation Requirements are met by the Insulating Cover.
TOP 23
Electronics-Salon DIN Rail Mount 10 Position Power Distribution Fuse Module Board
Electronics-Salon
Our Score
Product Features
Voltage Required for Work: Total Current Rating: 40Amp, Ac Or Dc 548V. Dimensions of the printed circuit board (PCB): The dimensions are 150 x 72 millimeters. (W X L X H): 5 mm x 29 mm Size of the module: (W X L X H) 153 mm x 87 mm x 53 mm
Power Distribution Fuse Module Board for Din Rail Mount.
1 To P2- The following are the ten output terminals: Pitch - 5Mm/0. Maximum Current: 6; Maximum Length: 295; Maximum Length: 2 3A per position, 2612 Awg wire, 7mm stripping length, Metric M2. Screw with five slots
P1 Terminals for Output: Pitch - 08Mm/0. 2", 10A maximum current per position, wire size 2612 Awg, 7Mm stripping length, Metric M2. Screw with five slots
Terminals for supplying information: Pitch - 62Mm/0. 3" Current 30A Per Position, Wire Size 2610 Awg, Stripping Length 8Mm, Metric M3 Slotted Screw
TOP 24
LITTELFUSE LFT600603C AMPS-Volts, 600V Class T Block 60A 3 Pole Box Lug
Littelfuse
LFT600603C
0.74 pounds
Our Score
Product Features
Amps(60)- 600 volts (vacuum)
600V Class T 60A 3 Pole Box Lug 600V Class T 60A 3 Pole Box Lug 600V Class T 60A 3 Pole Box
Accessory for the Panel
Holder for a fuse
TOP 25
Mersen 20313 Class H and K Non-Spring Reinforced Fuse Block
Mersen
GOS20313
0.25 pounds
Our Score
Product Features
All Class H, K 250 Power Fuses are compatible with this product.
Non-Class H And K Non-Class H And K Non-Class H And K Non Fuse Block with a Spring Reinforcement
Connector for Screws
Molded glass is used as an insulator. Gfpc (Glass Fiber Polycarbonate) is a type of polycarbonate that is filled with glass fibers.
All of the fuse clips are made of a tin alloy with a high conductivity. Copper Plated with a Non-Stick Coating Clips With Spring Reinforcement In 30A