22 Of Best Electrical Motor Controls In 2024
TOP 1
Speed Controller AC 50-220V 2000W 25A Motor Controller SCR High-power Electronic Voltage Regulator Module Motor LED Dimmers
AiTrip
Our Score
Product Features
It can be used to control the temperature of an electric stove, a water heater, a lighting dimmer, a small motor speed, and an electric iron thermostat, as well as achieve dimming, thermostats, and pressure regulator effects.
The Output Voltage Can Be Adjusted Between 50V and 200V. For Use With Electrical Appliances at 220V
Controls the speed of a DC motor universally. With this controller, you can change the speed of a dc motor.
Your Dc Motor Or Other Dc Load Can Easily Be Provided With A Continuous Current Using The Motor Speed Controller.
Make Certain that all power is turned off before attempting to wire the controller. Cut any of the lamp's or electrical appliances' battle lines or zero lines, and connect wires according to the "wiring diagram"; Adjust the potentiometer after turning on the power.
TOP 2
RioRand 7-70V PWM DC Motor Speed Controller Switch 30A
RioRand
7-70V PWM DC
3.40 x 2.30 x 1.40 inches
Our Score
Product Features
Suitable For Working Long Hours: Design of a circuit that optimizes performance and is stable
Potentiometer cable can be separated by about 15 cm, and it has a running stop brake function.
Using Imported High-Quality Materials Mos Tube, Three Pressure 100V High-Voltage Mos Tube, Three Voltage Mos Tube, Three Voltage Mos Tube, Three Voltage Low Frequency Automotive Fuses, Capacitors of Resistance
Pwm Frequency: Pwm Frequency is the frequency at which a piece 12Khz
Adjust the motor in a smooth, noiseless, vibration-free manner, with power indication and a wide duty cycle adjustment range.
TOP 3
ALL-CARB Router Fan Electric Motor Rheostat Variable Speed Controller AC 1500W
ALL-CARB
Does not apply
6.50 x 4.72 x 3.35 inches
0.64 pounds
Our Score
Product Features
Capacity at the moment: 15A
the name of the product Router Fan Rheostat Variable Speed Controller Ac Router Fan Electric Motor Rheostat
Capacity of Voltage: 60 Hz at 120 volts ac
The following are the three settings: On (Full) / Variable / Off / Off / Off / Off / Off / Off / Off /
Maximum Power Input: 1500W
TOP 4
Electric Motor Control, 5.0 Max amp
KB ELECTRONICS
8811012
0.31 pounds
Our Score
Product Features
115 Volts, 0 Max Amps Ulrich
Designed to fit a 2" x 4" electrical wall box.
Capacitor Start and Capacitor Run Motors are not compatible with this product.
Applications include: Humidifiers, Ventilators, Fans, Blowers, Fireplace Blowers, Attic Fans, Humidifiers
TOP 5
tatoko DC Motor Speed Controller 10V-55V 12V 24V 36V 40A Stepless DC Motor Speed Controller
tatoko
Our Score
Product Features
High Power Speed Controller Switch That Is Much More Adaptable Potentiometer With Switch Function
Voltage of the input supply: Dc 10V- Maximum current: 55 volts maximum voltage: 55 volts maximum voltage: 55 volts Continuous current of 60 amps: 40A; Range of speeds: 100%
" ","- The Input Voltage Must Differ " ","- ",Within a 10-minute period, the input voltage should be equal to the motor's rated voltage. It must be kept at 55 degrees Fahrenheit or it will be burned.
The casing around the outside is called the outer casing, and it is made up of It's made to keep the controller board safe from damage while also dissipating heat.
Dc10V- Adjustable Driver Cw Ccw Reversible Switch With Digit Display 55V Pwm Brushed Dc Motor Speed Controller
TOP 6
RioRand 6V 12V 24V 28V 3A 80W DC Motor Speed Controller PWM Speed Adjustable Reversible Switch 1203BB DC Motor Driver Reversing
RioRand
RR-PWM-3A
2.00 x 1.30 x 0.40 inches
Our Score
Product Features
The length of the switch cable is 15 centimeters (five centimeters).
The input power ranges from Dc6 to Dc12 watts. 28V; The Continuous Maximum Output Current is: 3A; The Maximum Power Output: 80W
Potentiometer with a Switch
Package: 1 Dc Motor Speed Controller by Riorand
Size of the item: 3. 2*5*1. 5 Cm/1. 3*2*0. 4 Inches; Weight (Net): 13 Ounces
TOP 7
10-50V 100A 5000W DC Motor Engine Speed Controller 0-100% PWM Control Industrial Motor Speed Regulator
Walfront
480.00 grams
Our Score
Product Features
Power to Command: From one watt to five thousand watts; Duty Cycle in Pwm (Pwm Duty): The Current Is 0 And It Is 100 And It Is 100 And It When the voltage is between Dc10V and Dc30V, the current should not exceed 40Ma.
Voltage Required for Work: dc 10- 50V; Max. 60 A rated current, 100 A peak current
Universal Speed Controller For Dc Brush Motors, Suitable For Car Cooling Fan Motors, Car Air Conditioning Motors, Exhaust Blowers, Treadmill Motors, and Other Applications
This motor speed controller can also be used to control dc heaters or dim dc lamps.
Temperature of Operation: 20 To 40. When the temperature is below 0°F, it can function normally.
TOP 8
PEMENOL Motor Speed Controller PWM DC 5V 12V 24V 150W Adjustable Speed Regulator
PEMENOL
Our Score
Product Features
Soft- The Motor Controller Has A Soft-Start Protection The Motor Controller Has A Soft-Start Protection A start-up protection feature that effectively reduces inrush current, protects the motor, and extends the motor's life.
The Rotary Encoder Adopts The Digital Pulse Principle, So The Output Will Be As Much As You Rotate It, And The Same Value Will Be Input When You Rotate It Next Time. Good Repeatability, High Precision, And Can Be Quickly Adjusted To The Value You Want
Using the Start/Stop Buttons: The Pwm Dc Motor Governor With Start And Stop Button, As Well As The Ability To Be Controlled By An External Switch, Will Satisfy Your Various Control Needs. Power to the Max: 150W. Voltage Required for Work: Dc5V30V, Anti-Static Input Protection Against Reverse Connection
Note: This product is only compatible with DC brushed motors and not with brushless motors. Please read the User Manual for more information: Https: //M. media- Amazon. com/Images/I/91Yf0Pb0V9L/91Yf0Pb0V9L/91Yf0Pb0V9L/91Yf0
The duty cycle, upper and lower duty cycle limits, and working frequency can all be adjusted with the 3 Digits Led Motor Speed Regulator. Customers Can Use It Depending On The Working Characteristics Of Their Own Motors. To prevent data loss in the event of a power outage, the adjustable electronic speed controller can save the set parameters automatically.
TOP 9
AC Motor Speed Controller 110V
FASTTOBUY
Our Score
Product Features
To save power, adjust the speed by adjusting the voltage;
Voltage: 110V / 220V
To maintain a relaxing working environment, reduce the rotational speed and vibration force of the vibration motor.
For a single motor, only one speed controller is required.
It is possible that a vibrating motor cannot be started from a low speed state. It can only be started when it is at a high speed.
TOP 10
NEW Magnetic Motor Starter. 7.5HP 1Ph 230V 40amp GE General Electric
WEG
WEG40 1 phase
6.00 pounds
Our Score
Product Features
Overload Relay with Adjustable Range 25-100 volts 40 Amps
Magnetic Motor Starter by Weg (WAG) 7. 208-volt 5 hp single phase Contactor, 240 volts, 40 amps
Enclosure for Nema 1 - Auxiliary Contacts N/O, Mounted on the Side
TOP 11
AYNEFY Motor Speed Controller, 400W AC Small Size High Precision Motor Speed Controller Motor Pinpoint Regulator Forward & Backward Direction
AYNEFY
3.94 x 1.97 x 1.97 inches
Our Score
Product Features
[Normal Speed Range]: [Normal Speed Range]: [Normal Speed Range]: [Normal Speed The speed regulation range of this speed controller is 90-180 mph. From 1400 RPM at 50 Hz to 90 Hz at 1400 RPM at 50 Hz, 60Hz, 1700 RPM/Min
[Specific Application]: This Motor Speed Controller is designed to work with AC220V 50/60Hz motors.
[Wide Application]: This Speed Controller Is Appropriate For A Wide Range Of Applications, Including Packaging, Printing, Food, Electronics, Instrumentation, Medical Equipment, and Clothing Industry Production Lines For Speed Control Drive Devices.
[Long- Use of the Term] To ensure its long-term durability, this speed controller is made of high-quality electronic circuits and integrated components. Durability over the long haul
[High Usefulness]: This speed controller has a small size, high precision, and a wide speed control range, making it extremely useful and long-lasting. Service Life Term
TOP 12
For Router Fan Variable Speed Controller Electric Motor Rheostat AC 120V
labwork
Our Score
Product Features
Off, On (Full), and Variable are the three options available. To increase or decrease the speed of the fan motor, simply turn the dial. The voltage is 120 volts and the current is 15 amps.
This is a listing for a new Router Fan Variable Speed Controller Electric Motor Rheostat Ac 120V.
Brush-type motors are the only ones that will work with this.
Keep in mind that Brushless motors and soft/slow start motors are not compatible. Router is available for purchase separately.
Power Cord - 110V/60Hz
TOP 13
Adjustable Digital display 10-55V 60A PWM DC Brushed Motor Speed Controller Switch Control 12V 24V 36V 48V Forward Brake Reverse
TKXEC
Our Score
Product Features
Display Type: Digital Motor Rotation Speed Percentage 0 ,Accurate Adjustment Speed Motor Speed is controlled by the output current.
The input voltage must be equal to the motor's rated voltage. a large voltage: 10-Volt Wide Voltage Input Maximum Output Current 60A, Continuous Current: 55V, Maximum Output Current 60A, Continuous Current: 55V, Maximum Output Current 60A, Continuous Current 40A.
Knob for controlling the speed: With Forward-Brake-Control And Stepless Speed Regulation Switch to the opposite direction. Only for brushed motors will this work.
Note: If the children's car has a forward-reverse circuit regulator, make sure the speed controller is connected between the power supply and the forward-reverse circuit regulator. The Children's Car's Reverse Circuit Regulator. The Speed Controller may be damaged if this is not done.
Notice 1: The input power supply must have a power rating of at least one. To get the motor to work, you'll need 5 times the motor's rated power (Note: The Motor's Rated Voltage Must Be Consistent With Its Input Voltage).
TOP 14
6-60V 12V 24V 36V 48V 30A PWM DC Motor Speed Controller Digital Regulator Variable Speed Switch Display LED Control Circuit Board Start Stop Switch
Vikye
3.15 x 1.18 x 1.18 inches
Our Score
Product Features
'Stable Function' is a term that refers to a function that is This is a very simple and straightforward procedure. The performance of a dc motor speed controller is stable. The Speed Controller is constructed with a high-quality circuit board to ensure a long service life.
[Aspect]: Screw Terminals are used in this motor speed controller for easy and quick wiring. A momentary start/stop switch and a speed control potentiometer are included.
[Note] : Please allow for a small size difference due to manual measurement errors. Thank you for your patience and understanding.
[Input Voltage Range]: [Input Voltage Range]: [Input Voltage Range] Dc6V- (The input voltage should match the motor's rated voltage.) 60V
[Concept]: With A Digital Display That Shows The Ratio Of Actual Speed To Maximum Speed In Percentage
TOP 15
eMylo Smart RF Motor Controller Switch Relay Wireless Remote Control Switch 12V Motor Switch 433Mhz
Owfeel
Our Score
Product Features
Modernization of Technology: Both the transmitters and the receivers use non-standard communication protocols. Directional Wireless Encoding Technology, which enables independent control and eliminates mutual interference, is a high-performance wireless encoding technology. "Tuya" Chip Module, which has a stable performance and sensitivity.
Switch to control a motor with a wireless remote control: It Is Specifically Made For Motors. Two- With a long control distance, the channel design is capable of controlling the motor's forward, reverse, and stop.
Wide Range of Use: Emylo Motor Driver Reversing Controller Switch with Structural Upgrades Allows Independent Control Without Mutual Interference Rolling doors, electric curtains, electric door locks, water pumps, and other motor machines are all examples of where this material is used. Now is the time to begin living a smarter life.
Stability is important. Signal Sensitivity And Interference Resistance Are Included In This Relay Module. To control a receiver within the valid range, an Rf Motor Controller can pass through walls, floors, and doors. Made of ABS and flame retardant material, it provides overvoltage and fire protection, making it safer.
Installation is simple: In One Minute, The Motor And Wireless Relay Are Connected Using A Special Jointing Clamp There are no tools required. During installation, avoid opening the box to ensure a secure connection and safe operation.
TOP 16
ALMOCN 2PCS 2000W PWM AC Motor Speed Control Module AC 50-220V 2000W 25A SCR Constant Adjustable Voltage Regulator
ALMOCN
Our Score
Product Features
The Maximum Power Output: 2000W; The Maximum Current Output:
Voltage of the input supply: 220V ac 110V ac 110V ac 110V ac 110V a The Voltage at which the output is produced is: 50V- 220V (Input Supply Voltage + Output Voltage)
The product makes use of a brand-new bidirectional high-speed communication system. Power Thyristor With Current Up To 25A, Which Addresses The Problem Of Overcurrent Caused By The Low Resistance Of The Electric Furnace Wire During Cooling.
Temperature of the operating environment: 20'C- 40'C; High efficiency, high torque, and low heat generation are all characteristics of this machine.
Connect this product in series in a lamp or an electric circuit, rotate the potentiometer screw rod, and it can regulate light and shade, speed, voltage, and temperature.
TOP 17
7-80V PWM DC Motor Speed Controller Switch 30A
LEIMO KPARTS
Our Score
Product Features
1 7- Motor Speed Control Regulator, 80V Pwm Dc Motor Speed Controller Switch 30A; Pwm Frequency: Pwm Frequency is the frequency at which a piece 12Khz.
2 7-Volt Wide Voltage Wide Range Of Applications, 80V High Current 30A Design Line Length 30cm, Board Switch With Operation Stop Brake Function, Adjustable Potentiometer Soft Cable Can Be Separated
3Circuit Optimization Design Wide Range Of Duty Cycle Adjustment, Smooth Motor Without Vibration, No Vibration, With Power Indication, Stable Circuit Design For Long Working Hours 3Circuit Optimization Design
4Adopt Imported High-Quality Products Three High-Voltage Mos Tubes 100V - High Voltage Fuses For Braking And Frequency Resistance Capacitors It Is Difficult To Heat And Replace The Parameters. The Internal Circuits And Components Are Protected By The Standard Aluminum Housing For Long-Term Use. Durability over time.
5Contents of the package: 1 X7- Switch to control the speed of an 80V PWM DC motor at 30A; Customer Service on Amazon that is Satisfied
TOP 18
NEW MAGNETIC MOTOR STARTER CONTROL FOR ELECTRIC AIR COMPRESSOR 5HP 1-PHASE 208-240 VAC 34AMP
shihlin
MSP30T-5-1-230
8.00 pounds
Our Score
Product Features
Auxiliary Contacts (Auxiliary Contacts) - Grommets for Wiring - Enclosure in Metal
220-volt 5 hp single phase Contactor for 240 Volt Coil Range 34 Amp
Dial between 22 and 24 for the Overload Relay. Overload protection is provided by 34 amps.
TOP 19
QWORK AC 110V 400W Knob Motor Speed Controller DC 0-90V Variable Adjustable Speed Regulator
QWORK
Our Score
Product Features
Low Power Consumption - This product consumes very little power. Power consumption is reduced due to our compact design and high precision.
Fitting - Only 90V Dc Motors are compatible with our speed controller.
Use in a Variety of Situations - It can be used to control the speed of a device. It is appropriate for a wide range of applications, including packaging, printing, electronics, clothing machinery, and so on.
Controlling the speed - It Can Adjust The Voltage Freely, Conveniently, And Simply Because Of The Adjustable Knob.
100% Satisfied Customer Service- Take A Relaxing Ride In One Month Get A FREE Experience With 100% Satisfied Service!
TOP 20
DC Motor Speed Controller,Hima Brush Motor Driver Controls Module DC 9V-60V 12V 24V 36V 48V 60V Motor Pulse Width Modulator Regulator 20A 1200W PWM Mo...
Hima
3.62 x 2.05 x 1.42 inches
0.35 pounds
Our Score
Product Features
In this case, Brush Motor Speed Regulation and Light Dimming Regulation In The Dc Circuit Can Both Be Achieved With The Dc Motor Driver. note: Electric vehicles are not compatible with this motor.
the following parameters: The input voltage range for a motor speed controller is 9 to 24 volts. The output current range is 0-60V, and the voltage is 60V. The continuous power is 1200W at 20A.
Controlling the speed: Our Motor Control Board has a potentiometer that can be used to regulate motor speed. Furthermore, it supports both clockwise and anticlockwise rotations. Adjusting the rotation wisely is a good idea.
Pwm: The Benefit Of Using A Pulse Width Modulation (Pwm) Method For Dimming / Speed Regulation Is That The Power Supply's Energy Can Be Fully Utilized, And The Circuit Is Highly Efficient.
Wiring is simple: Thick red wire for the positive of the power supply, and thick black for the negative; thick blue wire for the positive of the motor, and thick green for the negative of the motor.
TOP 21
Onyehn DC Motor PWM Speed Controller3V 6V 12V 24V 35V Speed Control Switch Mini LED Dimmer 5A 90W
Onyehn
Our Score
Product Features
Dc 6 Mini PWM Motor Speed Controller, 35V 5A. Pwm Duty Cycle Wide Voltage Dc Motor Speed Controller: 1% - 100%.
The speed of a DC motor is controlled by adjusting the pulse-width of a mini style Dc motor speed regulator. Width- (Pwm) Modulated (Pwm) Modulated (Pwm) Modul
It Can Be Used Not Only To Control The Speed Of A Dc Motor, But Also To Adjust The Led Light.
Disconnection Of Short Circuit Point By Default, Suitable For 5 Input voltage is 35V. Suitable For Low Power 3- Manually Connect The Short Circuit Point According To Your Needs Input voltage of 15V.
You can turn off the power supply output by screwing the potentiometer. Resettable Fuse For High Voltage And High Current, Automatic Disconnection For Overcurrent, Power Off For A Few Seconds For Cooling, Fuses Automatic Recovery
TOP 22
Lejin Universal 12V DC Motor Control Radio Remote Control High Performance 30A Range 200M Linear Actuators Linear Motor Forward and Reverse Radio Remo...
Lejin
Lejin-02
Our Score
Product Features
It's simple to set up wireless control. With the Transmitter (Remote Control), you can rotate a motor in the positive or reversal direction from anywhere within a safe distance.
In this case, It Can Be Used In Rolling Blinds, Rolling Doors, Projection Screens, Awnings, Pumps, Winches, Conveyors, And Other Appliances And Equipment With Dc Motors. It Can Remotely Control Dc Motor Rotates In The Positive Or Reversal Direction.
You Could Use The Transmitter (Remote) To Turn On / Off The Receiver From Any Reliable Distance. Wireless radio signals are capable of traveling through walls, floors, and doors.
The Product Makes Use of Non-Toxic Ingredients Technology that uses directional radio coding and allows for independent control without the need for mutual control. Outdoors, the remote control has a range of up to 200 meters. You can use two or more units at the same time in the same location.
High Strength: The Motor In The Picture Is Just A Test Prop. It Is A High Power / Relay Of 30A, More Stable, To Meet The Industrial Needs The package does not include a motor. Included in the package are: 1* Receiver (Includes Cover); 1* Remote Control (with battery; if you require an additional remote control, please let us know.
Top Picks
Most Popular
Related