24 Of Best Flap Discs In 2024
TOP 1
4.5" x 7/8" Premium High Density Jumbo Zirconia Type 29 Flap Disc 40 Grit
Benchmark Abrasives
4.50 x 4.50 x 0.50 inches
0.25 pounds
Our Score
Product Features
Designed to grind, blend, sand, and finish a wide variety of materials.
For our Flap Discs, Benchmark Abrasives uses only the highest quality grains and backing material.
Welders and metal fabricators have only one option.
Ansi Safety Requirements were followed when creating this product.
Designed to be used with an angle grinder
TOP 2
S SATC 20 Pack Flap Discs 40/60/80/120 Grit Grinding Wheel 4.5" x 7/8" High Density Bevel Type Angle Grinder Sanding Disc Abrasive Grinding Disc #29
S SATC
Our Score
Product Features
The most durable: The Grinder Sanding Disc has a long life expectancy, is safe and effective, and is made of a durable material. It has a durable fiberglass backing and a fine crystal size.t29 Flap Disc Construction With Fiberglass Backing Plate Effectively Absorbs Vibrations Without Smearing During Use, Bringing More Stable
Fiber Backing Is The Strongest Among Other Products: Top-Quality 4 1/2-Inch Grinding Wheels Hard Zirconia is a hard zirconia that has a level of hardness Griding Wheel Material is a good choice. This Flap Disc Is Made Of Industrial Grade High Density Premium Zirconia Material, Which Has A Higher Durability Than Standard Flap Discs And Is Designed To Be A More Robust And Economical Grinding Wheel.
Vaule Super: Wear eye protection and keep all guards while grinding discs 4 1/2 max RPM 13300. Ansl Safety Code B7 should be read and followed. T29 Grander Approved. Choose the right grit for the job. Each Disc is 4-inches in diameter. 1/2- With a 7/8-Inch Diameter It has an inch arbor and can be used with angle grinders that spin at up to 13,300 RPM. Designed to grind, blend, sand, and finish a wide variety of materials.
T29 Angle Grinder Compatible: The Angle Grinder Sanding Disc has a wide range of applications, including metal and woodworking, concrete grinding and finishing, stone smoothing, and so on. This Metal Cutting Discs Is Perfect For Grinding, Debarring, And Light Grinding On A Variety Of Surfaces, and Can Be Used For Metal Or Woodworking, Concrete Grinding Or Finishing, Stone Smoothing Or Finishing, Rust Removal, And More.
Size:flap Disc 4- Best Match 1 2 Inch, 40/60/80/120 Grit, 4 Grits Total, 20 Packs This 20-piece Flap Disc Set contains 10 pieces of 40 grit, 5 pieces of 60 grit, 3 pieces of 80 grit, and 2 pieces of 120 grit, making it an excellent choice for cutting a variety of metals.
TOP 3
Flap Disc 4 1/2 Inch, 40 60 80 120 Grit Grinding Sanding Wheels
LotFancy
2446
Our Score
Product Features
Exceptional Results: Resin of High Quality – The High Performance of Bonded Aluminum Oxide Abrasive: Durable, Abrasion Resistant, and Anti-Static Anti-Static And Static Clogging
Pack of Values: Assorted grits of 40, 60, 80, and 120 grit, 4-pack Type 27, 1/2-inch diameter, 7/8-inch arbor, 13300 RPM maximum speed
Rust, Paint, Ferrous Metals, Stainless Steel, and Non-Ferrous Metals are just a few of the applications for this product. Wood, plastics, and ferrous metals; 4 fits the majority of people 5 Angle Grinders, including the Dewalt Dcg414B, Dwe402, Makita 9557Pbx1, Bosch 1375A, and Gws8- Porter, 45. Pc60Tag, Pce810, Black Cable
Fiberglass Backing Provides Strength And Durability
From coarse to fine, a variety of grit flap discs are available to meet your blending, sanding, and finishing needs.
TOP 4
NEIKO 11142A Zirconia Flap Disc
Neiko
11142A
Our Score
Product Features
[Removal of Stock]: This Abrasive Flap Disc is made of coarse 40 grit Zirconia Alumina, making it ideal for aggressive grinding on hard materials such as metal.
[Quality]: [Premium]: [Premium]: [Premium These Flap Discs are made of industrial grade premium zirconia abrasive, which provides strength, durability, and extended disc life while withstanding high temperatures and pressure.
[Requirements]: Each Disc Is A 4-Inch Diameter 1/2- With a 7/8-Inch Diameter It has an inch arbor and can be used with grinders that spin at up to 13,300 RPM.
[Resin Fiber] is a type of resin fiber that is used to make a variety Vibrations are absorbed by the Resin Fiber Construction, which is reinforced by the Fiberglass Backing Plate, without smearing or contaminating the workpiece during use.
[Bevel]: These Bevel Type 29 Discs Are Angled To Make Contours, Edge And Weld Blending, And Radius Grinding More Effective.
TOP 5
SHALL 24-Pack Flap Disc, 4-1/2" x 7/8"
SHALL
9.84 x 5.12 x 3.54 inches
4.19 pounds
Our Score
Product Features
Emery Cloth - There's a lot more of it! Each Flap Disc contains 80 pieces of Emery Cloth, making it far more efficient than other 72-piece sets. Piece- Emery- Cloth Abrasive Grinding Wheels are now available for purchase. It Improves The Flap Discs' Durability And Density More Effectively.
Exceptional Longevity And Value - Hard Zirconia Alumina Abrasive Material That Lasts Longer Than Standard Aluminum Oxide Abrasive Material These Flap Discs also have durable Fiberglass Backing Plates that require less pressure to remove heavy stock and provide extra secure safety assurance - During use, the vibrations are absorbed without smearing.
Excellent performance - Each 4. 5" X 7/8- Angle Grinders with up to 13,300 RPM and 80 M/S are compatible with Flap Discs with an inch arbor size. Non-ferrous metals non-ferrous metals non-ferrous metals non-ferrous metals non-ferrous metals non-ferrous metal Fiberglass, plastics, woods, and other uneven surfaces are all ferrous materials.
Grit Number And Color Coding Etched - Flap Discs with various grits have a different colored label to distinguish them. Even if the label is missing, each abrasive grinding wheel has its own grit number etched on the metal ring for easy identification.
T29 20 pcs T29 includes 10 pieces of 40 grit, 5 pieces of 60 grit, 3 pieces of 80 grit, and 2 pieces of 120 grit, making it ideal for frequent contouring, shaping, and aggressive grinding during projects. T27 includes 4 pieces of 40 grit sandpaper as a supplement to the project's flat sanding and smoothing requirements. For all of your project requirements, this is the ideal location.
TOP 6
28 Pack 4 1/2 Inch Flap Disc Angle Grinder Sanding Disc 40 60 80 120 Grit Flap Sanding Disc
UltraOutlet
Our Score
Product Features
The Flap Sanding Discs Are Made Of Top-Quality Materials For Extreme Durability And Value. Built for a more durable and cost-effective grinding wheel, level hard zirconia alumina material lasts longer than standard aluminum oxide abrasive material.
a large number 4 1/2-Inch Flap Discs, 40-60-80-120 Grit, 7-Pack Each grade comes in its own bag. Excellent choice for cutting a variety of metals; perfectly meets all of your requirements.
This Flap Disc Can Be Used For A Wide Range Of Projects, From Metal And Woodworking To Concrete Grinding And Finishing, Stone Smoothing And Finishing, And Rust Removal. It Grinds Everything You Need For Your Projects To A Perfect Finish.
Fiberglass Backing Plate for Flap Discs - Sanding Discs for Grinder Have a Long Life Expectancy Use for a Long Time A Product That Is Both Safe And Effective, As Well As Made Of Durable Materials. The Flap Discs Have A Fiberglass Backing Plate That Effectively Absorbs Vibrations Without Smear During Usage, Bringing More Stable And Efficient Grinding The Flap Discs Have A Fiberglass Backing Plate That Effectively Absorbs Vibrations Without Smear During Usage, Bringing More Stable And Efficient Grinding The Flap Discs Are Made With A Fiberglass Backing Plate That Effectively Absorbs Vibrations Without Smear
Each Angle Grinder Sanding Disc is 4-inches in diameter and comes in the best match size. 1/2- With a 7/8-Inch Diameter It has an inch arbor and can be used with grinders that spin at up to 13,300 RPM.
TOP 7
Tonchean 50 Pack 5 Inch Aluminum Oxide Flap Discs 40 Grit High Density Industrial Abrasive Grinding Wheel Flap Sanding Disc Sandpaper Wheel Grinder di...
tonchean
0222
Our Score
Product Features
[Widely Used] Our Flap Sanding Discs Are Frequently Used To Remove Weld Reinforcement, Deburr, Polish, And Remove Rust From Metal Or Wood.
Abrasive Grinding Discs Are Made Of Industrial Grade Premium Blue Zirconia Cloth, Which Provides Strength, Durability, And Longer Disc Life.
[Heavy Duty] This 40 Grit Zirconia Abrasive Grinding Wheel Has A Coarser Construction That Is Ideal For Heavier Stock Removal And Sanding. The Grinding Disc Is Long-Lasting, Abrasion-Resistant, and Anti-Scratch. Anti-Static And Static Clogging. An Excellent Zirconia and Aluminum Oxide Grain Blend That Provides A Good Cut Rate To Cost Ratio.
Glass Fiber And Adhesive Form A Firm Combination [Effective Grinding] The Working Surface Will Not Be Polluted By Grinding Discs. The Fiberglass Pad can effectively absorb vibrations, resulting in more stable and efficient grinding with minimal noise.
[Size of Discs] 40 Grit,Material: Max Speed: Zirconia, Zirconia, Zirconia, Zirconia, 13000 revolutions per minute. Diameter of the outside: Approx. Inner Diameter: 125mm (5"), 125mm (5"), 125mm (5"), 125mm (5"), 125mm (5" Approx. 22Mm/ 0. 87". All sanding flap wheels are made on computer-controlled machines and put through a series of tests to ensure high quality and safety.
TOP 8
Neiko 11257A High Density Jumbo Premium Zirconia Flap Disc
Neiko
11257A
Our Score
Product Features
The 40 Grit Flap Disc has a coarser construction and is best used for removing heavier stock.
To Provide More Grinding Material Than Standard Flap Discs, These Discs Are Made Of Industrial Grade High Density Premium Zirconia.
Vibrations are absorbed without smearing thanks to the resin fiber construction and fiberglass backing plate.
Each disc is 4 inches in diameter. 1/2- With a 7/8-Inch Diameter It has an inch arbor and can be used with grinders that spin at up to 13,300 RPM.
For contours, edge and weld blending, and radius grinding, the Bevel Type 29 Disc Build is ideal.
TOP 9
EZARC Flap Discs 40 Grit, 4 1/2 x 7/8-Inch Flap Sanding Disc
EZARC
4.88 x 4.49 x 4.84 inches
Our Score
Product Features
The 40 Grit Flap Disc is a coarser-built disc that is ideal for removing heavier stock. Our Flap Disc Is Frequently Used To Remove Weld Reinforcement, Deburr, Polish, And Remove Rust From Metal Or Wood.
Ezarc Flap Sanding Discs Are Made Of Hard Zirconia Material, Which Lasts Longer Than Standard Aluminum Oxide Abrasive Material, Resulting In A More Robust And Economical Grinding Wheel.
[Flap Disc for Professional Grinder] 4- 1/2- With a 7/8-Inch Diameter Angle Grinder With A Maximum Grinding Speed Of 13, 300 Rpm Compatible With An Inch Arbor Size This Flap Disc For An Angle Grinder Is Designed For Grinding, Blending, Sanding, And Finishing On A Variety Of Materials.
[In a hurry] The Fiberglass Pad has the ability to effectively absorb vibration and provide more stable and efficient grinding.
[Easy to Use] The Bevel Type 29 Angle Design makes edge and corner grinding much easier. It's also great for surface sanding and working on welded seams at a working angle of 5 to 15.
TOP 10
WORKPRO 20-Pack Flap Discs, 4-1/2-inch
WORKPRO
5.12 x 4.92 x 8.66 inches
3.42 pounds
Our Score
Product Features
Built for a more robust and economical grinding wheel, made of hard zirconia alumina material, which lasts longer than standard aluminum oxide abrasive material.
This Premium Flap Disc Set includes 10 pieces of 40 grit, 5 pieces of 60 grit, 3 pieces of 80 grit, and 2 pieces of 120 grit, and can be used for a wide range of applications, including metal or woodworking, concrete grinding or finishing, stone smoothing or finishing, rust removal, and more - All You Need For Your Projects Is Perfectly Available
Fiberglass Backing Plate for T29 Flap Discs - The T29 Flap Disc has angled flaps that can be used for edge-to-edge applications. Applications that are in use or that have been contoured. For Stock Removal On Horizontal Surfaces, These Discs Are Also Designed With A Greater Surface Area Than Flat Type Discs. Fiberglass has a strong adhesive bond and does not contaminate the work surface. Fiberglass Backing Plate Absorbs Vibrations Effectively And Provides More Stable
Excellent performance - Each 4. 5" X 7/8- Angle Grinders with up to 13,000 RPM can use a Flap Disc with an inch arbor size. On non-ferrous metals, our Flap Disc Set is ideal for high-performance blending and stock removal. Fiberglass, plastics, woods, and other uneven surfaces are all ferrous materials.
TOP 11
3M Flap Disc 769F - 40+ Grit Ceramic
3M
3M™ Flap Disc 769F
Our Score
Product Features
3M Precisionshaped Grain Cuts Faster And Lasts Longer Than Regular Abrasive Grain
At A Reasonable Price, It Provides Long-Lasting High Performance And Versatility
Alumina Zirconia Flap Discs Have Been Proven To Outperform Traditional Alumina Zirconia Flap Discs
Individual flaps degrade, exposing fresh mineral and ensuring a consistent cut rate throughout the disc's life.
Use On Carbon Steel, Stainless Steel, And Other Heat-Sensitive Materials
From weld grinding and beveling to surface preparation, this tool covers a wide range of applications.
TOP 12
PEGATEC 40 Grit Flap Discs 4 1/2 inch Flap Wheel Type 29 Flap Sanding Disc
PEGATEC
Our Score
Product Features
Widely Used T29 15Design - The T29 15 design of our Flap Disc is ideal for fine grinding of flat, curved, chamfered, and concave-convex surfaces. The Thick Cloth Base And High-Quality Fabric The Sanding Discs are more flexible thanks to the tenacity cotton lining, and an excellent polishing effect can be achieved.
High Grinding Productivity - The Sanding Discs' Surfaces Have A Heat-Resistant Coating. Anti-Inflammatory As Well As Resistant Stick Coating, As Well As The High-End Strength Aluminum Oxide Raw Material Which Improves Grinding Efficiency By 55% While Ensuring A Smooth Material Surface Of The Material
Glass Fiber Mesh Cover with a Thickened Surface - Our Grinding Wheels' Glass Fiber Mesh Cover Design Is Combined Basf (Resin Adhesive), Making It More Wear-Resistant. The Service Life Is Increased By Two Times When Compared To An Ordinary Plastic Mesh Cover Even at 13500 RPM, the blade knob is made of PE, which will not break.
Protect Yourself From Thermal Burns - When the temperature of general flap Discs is too high during the grinding process, it is easy to burn the metal and cause it to discolor, reducing the metal's hardness and toughness. The Pegatec Flap Disc's patented ratio improves heat dissipation and prevents thermal burns.
Multi- Sanding Discs for a Variety of Applications - Angle Grinder Flap Disc Is Designed To Grind Various Materials, And Can Be Used For Metal Or Wood Processing, Concrete Grinding Or Finishing, Stone Smoothing Or Finishing, Rust Removal, Welding Mixing, Deburring Or Deburring, And So On. Angle Grinders with 7/8 Spindles are compatible with this product.
TOP 13
Benchmark Abrasives 4.5" x 7/8" Premium Zirconia Flap Disc Grinding Wheel 40 Grit Type 29-10 Pack
Benchmark Abrasives
Our Score
Product Features
Designed to grind, blend, and finish a wide variety of metals.
For our Flap Discs, Benchmark Abrasives uses only the highest quality grains and backing material.
Welders and metal fabricators have only one option.
Ansi Safety Requirements were followed when creating this product.
Designed to be used with an angle grinder.
TOP 14
MIDO Professional Abrasive Flap Disc 4-1 2 Inch 20 Pack Flap Disc Assorted Grit 40 60 80 120 Aluminum Oxide Sanding Grinding Wheels 4.5 x 7/8 Inch Fla...
MIDO Professional Abrasive
Our Score
Product Features
Our performance has been improved. For the best grinding performance and user experience, use 5 inch Flap Discs with thicker abrasive cloths and more durable abrasive grains.
All 4- have a long life span. Premium Alumina Oxide Grains, Polyester Flaps, And Multi-Color Multi-Color Multi-Color Multi-Color Multi-Color Multi-Color Multi-Color Multi-Color Multi-Color Multi-Color Multi-Color Multi-Color Multi-Color Multi-Color Multi Flaps Discs With Layered Fiberglass Plates Are More Durable Than Other Flaps Discs On The Market
4-Application Scope Most Angle Grinders Fit 1/2 Inch X 7/8 Inch Flap Discs, and Alumina Oxide Grains Can Be Used On Metal
Well- Our 20 Pack Contains 4 Different Grits (40 Grit, 60 Grit, 80 Grit, 120 Grit), 5 Pieces Of Each Grit.
Flap Discs Type 27 T27 Are Ideal For Smoothing And Blending Surfaces
TOP 15
Flap Discs 40 PCS 4.5 Inch - 40 60 80 120 Grit Grinding Discs 4 1/2 Assorted Sanding Grinding Wheels
MinCHI257
20200302FD40PCS
Our Score
Product Features
Resin of High Quality – The High Performance of Bonded Aluminum Oxide Abrasive: Durable, Abrasion Resistant, and Anti- Anti-Static And Static Clogging
40 pcs. each of 40, 60, 80, and 120 grit assorted pack, each grit 10 pcs., 4-pack 7/8 Inch Arbor, 1/2 Inch Diameter
Wide Range of Use: rust, paint, ferrous metals, stainless steel, and non-ferrous metals Metals, wood, and plastics; ferrous metals, wood, and plastics Most air and electric grinders, including Dewalt Dcg414B, Dwe402, Makita 9557Pbx1, Bosch 1375A, and Gws8- 45, Porter – Pc60Tag,Pce810,Black Pc60Tag,Pce810,Black Pc60Tag,Pce810
Excellent performance - Each 4. 5" X 7/8- Angle Grinders with up to 17,000 RPM can use a Flap Disc with an inch arbor size.
TOP 16
4 1/2 Flap Disc , T29 High Density Angle Grinder Sanding Disc
CREEYA
Our Score
Product Features
Exceptional Results: T29 Flap Disc has a Fiberglass Backing Plate that effectively absorbs jitter, resulting in more stable and effective grinding with less smear. T29 4, each The 18,000 RPM Idling Test Has Been Passed On The 5" X 7/8" Flap Disc To Ensure That High Performance (Note: When in use, please do not exceed 14,000Prm).
Density is high. 4- Flap Disc 1 2 Inch Is Fastened With 80 Pages Of Zirconia Sandpaper, Which Is 11% More Than The Standard Angle Grinder Sanding Disc Creeya Disc Measures Have A Larger Crystal Size, Faster Polishing, And Longer Lasting Time, Making It A Great Choice For Cutting Various Metals, Perfectly Meeting All Your Needs
More Expertise: 4 1/2 inch grinding discs make it compatible with angle grinders, and it fits the T29 Grander. For grinding, blending, sanding, and finishing a wide variety of materials. Designed to Last- Life Premium Abrasive Is Suitable For Stainless Steel, Hard Steel, Titanium, And Other Metals.
Highly Versatile: The 40/60 Grit Flap Disc has a coarser construction and is ideal for removing heavier stock. The 80-grit flap sanding disc is smoother than the 60-grit disc, making it ideal for light stock removal and other grinding tasks. Cleaning And Finishing With 120 Grit Grinding Wheels Our Flap Disc Is Frequently Used For Metal Or Non-Metallic Applications. Metal, Weld Seam Cleaning, Deburring, Polishing, Stainless Steel, Cast Iron, and Sheet Metal, as well as De-burring and polishing Rusting.
Exceptional: 4 1/2 grinding wheels made of high-grade hard zirconia material for industrial use. Grinder Sanding Disc Has Long Lasting Time Durable Material Because Zirconia Is A Good Material For Griding Wheel. Increased Durability Compared To Standard Flap Discs, Designed To Be A More Robust And Economical Grinding Wheel
TOP 17
EZARC Flap Disc 20 Pack, 4.5" x 7/8"
EZARC
80FD0020
9.45 x 4.72 x 4.33 inches
2.00 pounds
Our Score
Product Features
The 40/60 Grit Flap Disc is a coarser-built disc that is ideal for removing heavier stock. The 80-grit flap sanding disc is smoother than the 60-grit disc, making it ideal for light stock removal and other grinding tasks. Cleaning And Finishing With 120 Grit Grinding Wheels Our Flap Disc Is Frequently Used For Metal Or Non-Metallic Applications. Metal, Weld Seam Cleaning, Deburring, Polishing, Stainless Steel, Cast Iron, and Sheet Metal, as well as De-burring and polishing Rusting.
Ezarc 20 Pack Flap Discs Are Made Of Hard Zirconia Material, Which Lasts Longer Than Standard Aluminum Oxide Abrasive Material, Making For A More Robust And Economical Grinding Wheel.
4- [Flap Disc with Various Grits] Flap Disc with four different grits: 40, 60, 80, and 120. This Angle Grinder Flap Disc Set includes 10 40-grit discs, 5 60-grit discs, 3 80-grit discs, and 2 120-grit discs. The Grinder Sanding Disc is an excellent choice for grinding a variety of metals, and it perfectly meets all of your requirements.
4 [Sanding Discs for Professionals] 1/2- With a 7/8-Inch Diameter Angle Grinder With A Maximum Grinding Speed Of 13, 300 Rpm Compatible With An Inch Arbor Size This Angle Grinder Sanding Disc Can Be Used To Grind, Blend, Sand, And Finish A Variety Of Materials.
[In a hurry] Glass Fiber And Adhesive Form A Stable Combination That Will Not Contain Pollutants On The Work Surface. The Fiberglass Pad has the ability to effectively absorb vibration and provide more stable and efficient grinding.
TOP 18
Walter 06A452 Enduro-Flex Turbo Abrasive Flap Disc
Walter Surface Technologies
06A452
4.60 x 4.60 x 0.60 inches
0.31 pounds
Our Score
Product Features
Applications include: The Surface Conditioning Disc aids in the blending of welds, the breaking of edges, and the abrasive grinding of surfaces. This Flat Disc Can Also Be Used To Deburr
Disc with a Flap Abrasive Grinding Discs Can Be Used To Remove Material More Efficiently And Take Less Time During The Finishing Process
Specifications include: The Surface Finishing Disc is 5 inches in diameter. It has a diameter of 12 inches and is rated for a grinding tool with a maximum rotational speed of 12200 revolutions per minute. The Arbor Hole Is 5/8-Inch In Diameter. 11 In.
Grinding Disc Made of Metal For improved performance, the Grinder Disc employs exclusive Cyclone Technology, which provides maximum grinding ability as well as solid edge stability. The Abrasive Disc is ideal for use on steel and stainless steel.
Disc to be ground: This grinding disc has a patented Turbofan cooling design on the back that allows air to cool work pieces and reduce heat transfer to the surface, extending product life.
TOP 19
Weiler 51112 4-1/2" Tiger Paw Abrasive Flap Disc
Weiler
51112
4.60 x 8.20 x 4.60 inches
0.33 pounds
Our Score
Product Features
Cut Rate And Product Life Are Significantly Improved With 100% Zirconium Grain
Grain Retention Is Superior, Which Allows For Maximum Aggression On The Edge
Premature Shedding Is Eliminated With An Engineered Poly/Cotton Cloth That Extends Disc Life.
Contains a contaminant-free cloth
Phenolic protects the workpiece from scratching by preventing the backing from scratching it.
TOP 20
Neiko 11117A Premium Zirconia Flap Disc
Neiko
11117A
Our Score
Product Features
The 60-grit Flap Disc Is Perfect For Grinding On A Variety Of Work Surfaces.
For Strength, Durability, And Longer Disc Life, Made Of Industrial Grade Premium Zirconia
Vibrations are absorbed without smearing thanks to the resin fiber construction and fiberglass backing plate.
The Flat Type 27 Disc Build Is Good For Blending, Smoothing, And Finishing Flat Surfaces.
Each disc is 4 inches in diameter. 1/2- With a 7/8-Inch Diameter It has an inch arbor and can be used with grinders that spin at up to 13,300 RPM.
TOP 21
PFERD 4-1/2" x 5/8-11 POLIFAN Curve Flap Disc SGP
Pferd
67258
4.50 x 4.50 x 0.80 inches
Our Score
Product Features
On a hot day, the ceramic oxide grain provides a cool grinding surface. Materials that conduct heat without causing thermal damage to the workpiece
Consumable Fiberglass Backing Will Not Melt Or Scratch The Workpiece
Fillet welds and repair applications can be precisely ground out thanks to the radial construction shape.
Multi- Purpose - It can be used as a standard flap disc as well as for underhand applications when the top of the disc is used.
60 grit provides excellent stock removal rates as well as a smooth surface finish.
TOP 22
3M™ Flap Disc 769F, 05904, T27, 4 1/2
3M
3M™ Flap Disc 769F
Our Score
Product Features
3M Precision-Made Components are included in this kit. Shaped Abrasive Grain Cuts Faster And Lasts Longer Than Standard Abrasive Grain
Delivers Long-Term Results At A Reasonable Price, Long-Lasting High Performance And Versatility
Alumina Zirconia Flap Discs Have Been Proven To Outperform Traditional Alumina Zirconia Flap Discs
Individual flaps degrade, exposing fresh mineral and ensuring a consistent cut rate throughout the disc's life.
Use On Carbon Steel, Stainless Steel, And Other Heat-Resistant Materials Alloys with a High Sensitivity
From weld grinding and beveling to surface preparation, this tool covers a wide range of applications.
TOP 23
Benchmark Abrasives 4.5" x 7/8" Premium High Density Jumbo Zirconia Type 27 Flap Disc 60 Grit
Benchmark Abrasives
BM-F4.5SZ60T27HD
Our Score
Product Features
Designed to grind, blend, sand, and finish a wide variety of materials.
For our Flap Discs, Benchmark Abrasives uses only the highest quality grains and backing material.
Welders and metal fabricators have only one option.
Ansi Safety Requirements were followed when creating this product.
Designed to be used with an angle grinder
TOP 24
Premium Zirconia Flap Disc 4-1/2" X 7/8" 40 GRIT Pack of 50
MarsIndustry
100.00 x 100.00 x 50.00 centimeters
100.00 kilograms
Our Score
Product Features
It's especially good for stainless steel, but it's also good for mild steel.
Our Flap Disc is hard-wearing and has a long service life.
The Flap Disc Is Compatible With Any 115mm (4. Angle Grinder (5" x 5" x 5" x 5"
Wood, metal, and plastic are all good choices.
Ideal For The Home, Workshop, Hobbyists, Tradesmen, Builders, And Diy Enthusiasts, To Name A Few
Top Picks
Most Popular
Related