19 Of Best Frequency Transducers In 2024
TOP 1
AD831 High Frequency Transducer RF Mixer Module 500MHz Bandwidth Mixing Down Mixing Dual Balanced Mixer Single Chip Radio Frequency Converter -10dBm
Walfront
3.94 x 2.36 x 3.15 inches
0.02 pounds
Our Score
Product Features
The Ad831 Is A Single Chip Mixer With Low Distortion And A Wide Dynamic Range For Hf And Vhf Receiver Rf-Rf-Rf-Rf-Rf-Rf-Rf-Rf-Rf-Rf-Rf-Rf-Rf-Rf-Rf-Rf- If Frequency, In Dmr Base Station, Second Mixer, Dc- Ultrasound imaging, frequency move detection, and other applications include baseband conversion, quadrature modulation, and demodulation, as well as baseband conversion, quadrature modulation, and demodulation.
The Ad831 Is A Single Chip Mixer With Low Distortion And A Wide Dynamic Range For Hf And Vhf Receiver Rf-Rf-Rf-Rf-Rf-Rf-Rf-Rf-Rf-Rf-Rf-Rf-Rf-Rf-Rf-Rf- If Frequency, In Dmr Base Station, Second Mixer, Dc- Ultrasound imaging, frequency move detection, and other applications include baseband conversion, quadrature modulation, and demodulation, as well as baseband conversion, quadrature modulation, and demodulation.
There Are No Corresponding Shielding And Isolation Issues, So When Compared To The Passive Mixer, The System Performance Is Improved And The System Cost Is Reduced.
The Mixer Has A Single Power Supply, Rf, If, And Lo Ports With Dc Isolation Capacitor, And Is Simple To Use.
Because the amplifier has a low Dc offset, it can be used in Dc-only applications. Conversion of Baseband Frequencies and Quadrature Amplitude Demodulation
The Ad831 has a third-order intermodulation intercept point of 24 dbm, allowing for the realization of - Without The Need For A High Power Lo Drive, 10 Dbm Lo Power
TOP 2
RF Mixer, RFin=1.5‑3.8GHz 8.0dB Conversion Loss Frequency Transducer Module Low Noise Converter Diode
Jacksing
Our Score
Product Features
Between the Local Oscillator and the Rf Input, there is a 35 dB high isolation that is stable and reliable.
Only 8% of the conversions are lost. The Noise Figure Is As Low As 8, And The Volume Is As Low As 0Db. 0Db (Ssb) is the decimal representation of the decimal representation of the decimal representation of This is a passive device that does not need to be powered.
Using 1. Pcb Double Sided Board, 6mm Thick, Sturdy And Durable, With A Long Service Life
The product has a large heat dissipation area, is stable to operate, and has a long operating time.
The interior is made up of double balanced microwave diodes that are extremely reliable.
TOP 3
DFKEA High Frequency Transducer,Radio Frequency Mixer Module RF Transducer Multiplier Electronic Parts +4.5 V-±12.6 V
DFKEA
0.04 pounds
Our Score
Product Features
The entire process of spraying tin ensures good passing performance of both large and small currents. Rf Mixer Module
High-Quality Radio Frequency Mixer Module, 1. 6 mm thick double-sided sheet, strong and long-lasting
Small and light in weight, radio frequency is easy to carry and use at any time, making it very convenient and practical.
Multiplier Mixer Module Can Be Used For Analog Or Digital Video Signals As Well As High-Speed Data Transmission
High-frequency transducers have a large heat dissipation area, a long service life, and can be used for an extended period of time.
TOP 4
RF Mixer, Converter Passive Diode 8.0dB Conversion Loss RFout=DC‑1.0GHz Frequency Transducer Module
Jinyi
Our Score
Product Features
Between the Local Oscillator and the Rf Input, there is a 35 dB high isolation that is stable and reliable.
The product has a large heat dissipation area, is stable to operate, and has a long operating time.
Using 1. Pcb Double Sided Board, 6mm Thick, Sturdy And Durable, With A Long Service Life
The interior is made up of double balanced microwave diodes that are extremely reliable.
Only 8% of the conversions are lost. The Noise Figure Is As Low As 8, And The Volume Is As Low As 0Db. 0Db (Ssb) is the decimal representation of the decimal representation of the decimal representation of This is a passive device that does not need to be powered.
TOP 5
RF Mixer, Low Noise Diode Passive Frequency Transducer Module
FastUU
Our Score
Product Features
The interior is made up of double balanced microwave diodes that are extremely reliable.
Using 1. Pcb Double Sided Board, 6mm Thick, Sturdy And Durable, With A Long Service Life
The product has a large heat dissipation area, is stable to operate, and has a long operating time.
Only 8% of the conversions are lost. The Noise Figure Is As Low As 8, And The Volume Is As Low As 0Db. 0Db (Ssb) is the decimal representation of the decimal representation of the decimal representation of This is a passive device that does not need to be powered.
Between the Local Oscillator and the Rf Input, there is a 35 dB high isolation that is stable and reliable.
TOP 6
RF Mixer, Passive Frequency Transducer Module RFout=DC‑1.0GHz Diode
Crisist
Our Score
Product Features
The interior is made up of double balanced microwave diodes that are extremely reliable.
Only 8% of the conversions are lost. The Noise Figure Is As Low As 8, And The Volume Is As Low As 0Db. 0Db (Ssb) is the decimal representation of the decimal representation of the decimal representation of This is a passive device that does not need to be powered.
Using 1. Pcb Double Sided Board, 6mm Thick, Sturdy And Durable, With A Long Service Life
The product has a large heat dissipation area, is stable to operate, and has a long operating time.
Between the Local Oscillator and the Rf Input, there is a 35 dB high isolation that is stable and reliable.
TOP 7
Frequency Transducer Module, Low Noise RFout=DC‑1.0GHz RFin=1.5‑3.8GHz Diode RF Mixer
SoarUp
Our Score
Product Features
The interior is made up of double balanced microwave diodes that are extremely reliable.
Using 1. Pcb Double Sided Board, 6mm Thick, Sturdy And Durable, With A Long Service Life
The product has a large heat dissipation area, is stable to operate, and has a long operating time.
Only 8% of the conversions are lost. The Noise Figure Is As Low As 8, And The Volume Is As Low As 0Db. 0Db (Ssb) is the decimal representation of the decimal representation of the decimal representation of This is a passive device that does not need to be powered.
Between the Local Oscillator and the Rf Input, there is a 35 dB high isolation that is stable and reliable.
TOP 8
Frequency Transducer Module, Passive RF Mixer Converter RFin=1.5‑3.8GHz Diode
LIKJ
Our Score
Product Features
Only 8% of the conversions are lost. The Noise Figure Is As Low As 8, And The Volume Is As Low As 0Db. 0Db (Ssb) is the decimal representation of the decimal representation of the decimal representation of This is a passive device that does not need to be powered.
Between the Local Oscillator and the Rf Input, there is a 35 dB high isolation that is stable and reliable.
Using 1. Pcb Double Sided Board, 6mm Thick, Sturdy And Durable, With A Long Service Life
The product has a large heat dissipation area, is stable to operate, and has a long operating time.
The interior is made up of double balanced microwave diodes that are extremely reliable.
TOP 9
Mixer Module, 0.1‑500MHz Conversion Board High Frequency Transducer -10dBm
01 02 015
Our Score
Product Features
Power Consumption at 10 dBm Low: Can Achieve a 24 Dbm Third Order Intercept Point There Are No Corresponding Shielding And Isolation Problems With 10Dbm Lo Power Consumption, There Are No Corresponding Shielding And Isolation Problems With High Power Lo Drivers, Can Improve System Performance And Reduce Costs
Wide Range of Use: Rfif Down Conversion In Hf And Vhf Receivers, Second Mixer In Base Stations, Dc Baseband Conversion, Quadrature Modulation And Demodulation, And Doppler Detection In Imaging are just a few of the applications.
Low Distortion And A Broad Dynamic Range: The Ad831 is a single chip mixer with low distortion and a wide dynamic range.
At 70 MHz, the 3Db Ssb Noise Figure is: The Ssb Noise Figure Of This Mixer Module Is 10 With The Output Amplifier And Optimal Source Impedance At 70 MHz, 3 dB is achieved. There is no insertion loss, there is no external duplexer, and there is no passive termination.
a single source of power The Mixer Module is designed to be powered by a single power supply, and the Rf, If, and Lo ports are equipped with Dc Isolation Capacitors for ease of use.
TOP 10
Microwave Radio Frequency Dual Double Balanced RF Mixer Frequency Transducer SMA Female Differential Circuit Signal IF Filter
BooiParts
Our Score
Product Features
Dual Double Balanced Rf Mixer Frequency Transducer Sma Female Differential Circuit Signal If Filter Microwave Radio Frequency
TOP 11
High Frequency Transducer, Low Distortion Conversion Mixer Module -10dBm Bandwidth Mixing
01 02 015
Our Score
Product Features
Power Consumption at 10 dBm Low: Can Achieve a 24 Dbm Third Order Intercept Point There Are No Corresponding Shielding And Isolation Problems With 10Dbm Lo Power Consumption, There Are No Corresponding Shielding And Isolation Problems With High Power Lo Drivers, Can Improve System Performance And Reduce Costs
Wide Range of Use: Rfif Down Conversion In Hf And Vhf Receivers, Second Mixer In Base Stations, Dc Baseband Conversion, Quadrature Modulation And Demodulation, And Doppler Detection In Imaging are just a few of the applications.
At 70 MHz, the 3Db Ssb Noise Figure is: The Ssb Noise Figure Of This Mixer Module Is 10 With The Output Amplifier And Optimal Source Impedance At 70 MHz, 3 dB is achieved. There is no insertion loss, there is no external duplexer, and there is no passive termination.
a single source of power The Mixer Module is designed to be powered by a single power supply, and the Rf, If, and Lo ports are equipped with Dc Isolation Capacitors for ease of use.
Low Distortion And A Broad Dynamic Range: The Ad831 is a single chip mixer with low distortion and a wide dynamic range.
TOP 12
Frequency Transducer Module, RF Mixer Passive Low Noise RFout=DC‑1.0GHz
WNSC
Our Score
Product Features
Only 8% of the conversions are lost. The Noise Figure Is As Low As 8, And The Volume Is As Low As 0Db. 0Db (Ssb) is the decimal representation of the decimal representation of the decimal representation of This is a passive device that does not need to be powered.
Between the Local Oscillator and the Rf Input, there is a 35 dB high isolation that is stable and reliable.
Using 1. Pcb Double Sided Board, 6mm Thick, Sturdy And Durable, With A Long Service Life
The product has a large heat dissipation area, is stable to operate, and has a long operating time.
The interior is made up of double balanced microwave diodes that are extremely reliable.
TOP 13
Mixer Module, Board AD831 Low Distortion -10dBm High Frequency Transducer
LIKJ
Our Score
Product Features
Power Consumption at 10 dBm Low: Can Achieve a 24 Dbm Third Order Intercept Point There Are No Corresponding Shielding And Isolation Problems With 10Dbm Lo Power Consumption, There Are No Corresponding Shielding And Isolation Problems With High Power Lo Drivers, Can Improve System Performance And Reduce Costs
Low Distortion And A Broad Dynamic Range: The Ad831 is a single chip mixer with low distortion and a wide dynamic range.
Wide Range of Use: Rfif Down Conversion In Hf And Vhf Receivers, Second Mixer In Base Stations, Dc Baseband Conversion, Quadrature Modulation And Demodulation, And Doppler Detection In Imaging are just a few of the applications.
a single source of power The Mixer Module is designed to be powered by a single power supply, and the Rf, If, and Lo ports are equipped with Dc Isolation Capacitors for ease of use.
At 70 MHz, the 3Db Ssb Noise Figure is: The Ssb Noise Figure Of This Mixer Module Is 10 With The Output Amplifier And Optimal Source Impedance At 70 MHz, 3 dB is achieved. There is no insertion loss, there is no external duplexer, and there is no passive termination.
TOP 14
RF Mixer, RFin=1.5‑3.8GHz Passive Low Noise Frequency Transducer Module 8.0dB Conversion Loss
Diydeg
Our Score
Product Features
The interior is made up of double balanced microwave diodes that are extremely reliable.
The product has a large heat dissipation area, is stable to operate, and has a long operating time.
Using 1. Pcb Double Sided Board, 6mm Thick, Sturdy And Durable, With A Long Service Life
Only 8% of the conversions are lost. The Noise Figure Is As Low As 8, And The Volume Is As Low As 0Db. 0Db (Ssb) is the decimal representation of the decimal representation of the decimal representation of This is a passive device that does not need to be powered.
Between the Local Oscillator and the Rf Input, there is a 35 dB high isolation that is stable and reliable.
TOP 15
Roadiress Frequency Transducers, 35M-4.4GHz RF Signal Source Phase Locking Loop Frequency Synthesizer ADF4351 Development Board
Roadiress
2.76 x 1.97 x 0.79 inches
0.04 pounds
Our Score
Product Features
Voltage of supply: 9V (5Vdc)
Frequency Range of the Output: 35Mhz - 4Ghz
Three- All functions, including point frequency sweep and frequency hopping, are enabled by a wire serial peripheral interface bus lead to the control pin and the state locking pin.
Default value - Active Crystal Oscillator with a 50 ppm and a 25 mM frequency range.
For ease of use, all control pins have been led out.
TOP 16
Taidda Passive Double Balanced Mixer
Taidda
2.76 x 2.17 x 0.47 inches
0.11 pounds
Our Score
Product Features
Gaas Schottky Diodes and a Novel Planar Transformer are used in passive mixers. Structures of Chip Baluns
It Can Also Be Used As An Up-Cycle Down-converter Two-way converter Phase Modulator and Demodulator (also known as a phase comparator) is a device that modifies and demodulates the phase
The Passive Mixers are designed with small components, are compact, and light in weight.
High Isolation Is A Benefit Of The Mixer
Double-passive passive- 8-Piece Balanced Mixer Surface to Pin – Msop (Mount Plastic Package) is a type of plastic package that is mounted on the wall
TOP 17
Mixer Module, Wide Dynamic Range Board High Frequency Transducer Conversion
Chiwe
Our Score
Product Features
Power Consumption at 10 dBm Low: Can Achieve a 24 Dbm Third Order Intercept Point There Are No Corresponding Shielding And Isolation Problems With 10Dbm Lo Power Consumption, There Are No Corresponding Shielding And Isolation Problems With High Power Lo Drivers, Can Improve System Performance And Reduce Costs
Low Distortion And A Broad Dynamic Range: The Ad831 is a single chip mixer with low distortion and a wide dynamic range.
At 70 MHz, the 3Db Ssb Noise Figure is: The Ssb Noise Figure Of This Mixer Module Is 10 With The Output Amplifier And Optimal Source Impedance At 70 MHz, 3 dB is achieved. There is no insertion loss, there is no external duplexer, and there is no passive termination.
Wide Range of Use: Rfif Down Conversion In Hf And Vhf Receivers, Second Mixer In Base Stations, Dc Baseband Conversion, Quadrature Modulation And Demodulation, And Doppler Shift Detection In Imaging are just a few of the applications.
a single source of power The Mixer Module is designed to be powered by a single power supply, and the Rf, If, and Lo ports are equipped with Dc Isolation Capacitors for ease of use.
TOP 18
Mixer Module, Bandwidth Mixing -10dBm High Frequency Transducer Conversion
YOAS
Our Score
Product Features
Power Consumption at 10 dBm Low: Can Achieve a 24 Dbm Third Order Intercept Point There Are No Corresponding Shielding And Isolation Problems With 10Dbm Lo Power Consumption, There Are No Corresponding Shielding And Isolation Problems With High Power Lo Drivers, Can Improve System Performance And Reduce Costs
Low Distortion And A Broad Dynamic Range: The Ad831 is a single chip mixer with low distortion and a wide dynamic range.
At 70 MHz, the 3Db Ssb Noise Figure is: The Ssb Noise Figure Of This Mixer Module Is 10 With The Output Amplifier And Optimal Source Impedance At 70 MHz, 3 dB is achieved. There is no insertion loss, there is no external duplexer, and there is no passive termination.
a single source of power The Mixer Module is designed to be powered by a single power supply, and the Rf, If, and Lo ports are equipped with Dc Isolation Capacitors for ease of use.
Wide Range of Use: Rfif Down Conversion In Hf And Vhf Receivers, Second Mixer In Base Stations, Dc Baseband Conversion, Quadrature Modulation And Demodulation, And Doppler Shift Detection In Imaging are just a few of the applications.
TOP 19
Mixer Module, 0.1‑500MHz High Frequency Transducer Conversion
Jacksing
Our Score
Product Features
At 70 MHz, the 3Db Ssb Noise Figure is: The Ssb Noise Figure Of This Mixer Module Is 10 With The Output Amplifier And Optimal Source Impedance At 70 MHz, 3 dB is achieved. There is no insertion loss, there is no external duplexer, and there is no passive termination.
Low Distortion And A Broad Dynamic Range: The Ad831 is a single chip mixer with low distortion and a wide dynamic range.
Wide Range of Use: Rfif Down Conversion In Hf And Vhf Receivers, Second Mixer In Base Stations, Dc Baseband Conversion, Quadrature Modulation And Demodulation, And Doppler Shift Detection In Imaging are just a few of the applications.
a single source of power The Mixer Module is designed to be powered by a single power supply, and the Rf, If, and Lo ports are equipped with Dc Isolation Capacitors for ease of use.
Power Consumption at 10 dBm Low: Can Achieve a 24 Dbm Third Order Intercept Point There Are No Corresponding Shielding And Isolation Problems With 10Dbm Lo Power Consumption, There Are No Corresponding Shielding And Isolation Problems With High Power Lo Drivers, Can Improve System Performance And Reduce Costs
Top Picks
Most Popular
Related