24 Of Best Fuse Blocks In 2024
TOP 1
6 Circuit Fuse Block W/Negative Bus
JOYHO
JH51693-6B
1.97 x 4.80 x 1.97 inches
Our Score
Product Features
Exceptional Quality: This Fuse Holder Is Made Of Environment Fire-Resistant Nylon Material And Meets All The Standards Of An Ideal Fuse Box. It is strong mechanically, insulated, heat resistant, and flame resistant. There is unlikely to be any problems such as fracture, deformation, combustion, or a short circuit.
Suitable for your vehicle: This Premium Fuse Box With Bus Bar Is Required For All Vehicles Equipped With A 10-Amp Alternator. It's a 32-volt DC power source that can be used in any car or boat.
Setup Time: 5 minutes You don't have to be concerned about getting your fuse box ready to use. This six-circuit fuse box is simple to set up.
Labels for the names of the appliances are as follows: There are 70 extra electric device name labels included in the package. You'll be able to figure out which appliance is malfunctioning in a matter of seconds.
1 Year Limited Warranty: A One-Year Warranty Is Included With This Fuse Block With Ground. Warranty is for a year. Simply contact us for a replacement if the part ever fails on your truck, suv, rv, atv, utv, or boat.
TOP 2
Blue Sea Systems 100-300A MEGA/AMG Fuse Block
Blue Sea Systems
5001
1.50 x 6.00 x 9.00 inches
0.15 pounds
Our Score
Product Features
The Abyc/USCG Insulation Requirements are met by the Insulating Cover.
5/16" (M8) Ring Terminals are accepted.
Stainless steel studs are corrosion resistant and have a high torque rating for excellent electrical contact.
Breakouts in the insulating cover allow wire access in three directions.
To ensure secure fuse mounting, use molded studs.
TOP 3
DC Power Fuse Distribution Strip Module
OONO
Our Score
Product Features
Pitch of the input terminals is 7. 62Mm/0. Maximum Current 30 Amps Per Position, Wire Size 2610 Awg, Stripping Length 8Mm, Metric M3 Slotted Screw, 3" Connect To Other Modules To Support Power Supply Expansion
Dc 0 to 32V working voltage 30 Amps is the maximum total input current. 6 output channels, each with a maximum output current of 3 amps (factory-installed) You can replace the fuse to support up to 10 amps if the installed fuse value is 3 amps.
Pitch Pitch Pitch Pitch Pitch Pitch Pitch Pitch Pitch Pitch P 0Mm/0. Metric M2, 197", Wire Size 2612 Awg, Stripping Length 7Mm Screw with five slots
Fuse Holders For Ato/Atc Medium Blade Fuse, The Fuse Can Be Removed And Replaced Easily. With the Fuse Fail Indication function, when you connect a load and the fuse blows or is unplugged, the Fail Indication Led will illuminate.
Pcb with 4 dual copper layers made of fiberglass. Din Rail Mount Carrier, High Quality Taiwan Dinkle Fireproof Nylon Material (Not China Low Quality Carrier), Can Support Rail Width 35Mm.
TOP 4
Blue Sea Systems Class T Fuse Blocks
Blue Sea Systems
5502
3.00 x 9.00 x 7.25 inches
1.10 pounds
Our Score
Product Features
The four-stud design allows for easy installation of large cable lugs around connecting studs without being obstructed by the fuse.
Maximum Voltage How it works: Max Amps: 160 Volts DC How it works: Fuses with a 320A rating and a Class T rating are available. 225A- Mounting: 400A, 400A, 400A, 400A, 400A, 400 Terminal Stud Size: 3/8"- 1/4" (M6) Screws 16 (M10)
Even with high heat, the stud design ensures secure fuse mounting.
Stainless steel studs are corrosion resistant and have a high torque rating.
One- Piece Stainless Flange Nuts Provide a Secure And Safe Connection
The Abyc/USCG Insulation Requirements are met by the Insulating Cover.
Fuse is available for purchase separately.
Wire access can be made in any direction thanks to cover breakouts.
TOP 5
Blue Sea Systems ANL Fuse Block
Blue Sea Systems
5005
1.50 x 6.00 x 9.00 inches
0.26 pounds
Our Score
Product Features
The product comes in an 8-inch package height.
Origin: United States United States of America
The package has a 9-inch width to it.
The product comes in a ten-inch-long package.
TOP 6
Blue Sea Systems Fuse Block MIDI
Blue Sea Systems
7720
8.00 x 4.00 x 2.00 inches
0.33 pounds
Our Score
Product Features
Fuses are protected from the harsh marine environment by a sealed cover.
Ignition Protected Ignition For Use On Gasoline Or Diesel-Powered Boats
The Abyc/USCG Insulation Requirements are met by the Insulating Cover.
TOP 7
Painless Performance 70207 Weatherproof Cirkit Boss Auxiliary Fuse Block
Painless
70207
7.00 x 3.25 x 7.50 inches
1.58 pounds
Our Score
Product Features
With both constant and ignition hot circuits, the first circuit isolator system is available.
Any Vehicle's Electrical Accessories Can Be Installed In A Safe Way
Three 20-minute sessions are included. With a maximum total amperage handling of 40 amps, there are four constant hot circuits and four ignition hot circuits.
Protects your original equipment manufacturer (OEM) and is simple to install
Includes: 40-year weatherproof guarantee 50-Amp Spst Relay, Weatherproof 50-Amp Spst Relay, Weatherproof 50-Amp Spst Weatherproof Relay Base/Fuse Block With Harness, Weatherproof Crimp-On Relay Base/Fuse Block With Harness, Weatherproof Crimp-On Relay Base/Fuse Block With Harness, Weatherproof Crimp-On Relay On Heat- Terminals that can be shrunk, a weatherproof fuse block cover, and mounting hardware
TOP 8
Blue Sea Systems-5503 ANL 35A to 750A Fuse Block
Blue Sea Systems
5503
3.00 x 9.00 x 7.25 inches
Our Score
Product Features
5/16" (M8) Ring Terminals are accepted.
This book has a cover.
Stainless steel studs are corrosion resistant and have a high torque rating for excellent electrical contact.
4/0 Awg is the maximum cable size.
For use on systems with a DC voltage of up to 32 volts
Material of foundation: Polycarbonate with reinforcements
TOP 9
Blue Sea Systems - 5015 Fuse Block AGC 6-CIR W/Ground
Blue Sea Systems
5015
2.00 x 4.00 x 8.00 inches
0.54 pounds
Our Score
Product Features
Weight of the package 55 Pounds
Dimensions of the package 064 inches tall by 18 inches wide 034 L X 9 is a number that can be used to describe the size of (In Centimeters) 398 W
Labeling, spare fuse storage, and easy fuse removal are all possible thanks to the innovative design.
Large Format Labels Can Be Accepted With A Clear Insulating Cover With Label Recesses
TOP 10
Blue Sea Systems 7725 Safety HUB Fuse Block 100 RBS
Blue Sea Systems
7725
9.00 x 4.30 x 11.50 inches
1.00 pounds
Our Score
Product Features
Three 30A-rated 200A Midi/Ami Fuses are ideal for high-voltage applications. Panel feeds, windlasses, and stereo amplifier circuits are all examples of amp circuits.
An Ignition-Protected Fuse Block And An Integrated Connecting Plug are combined in this product.
Reduces wiring connections and consolidates up to seven fused circuits, making it safe for use on gasoline-powered boats.
Four 1A- Fuses for 200A Ato/Atc- Circuits such as bilge pumps, alarms, and clock memory are all good candidates.
TOP 11
Blue Sea Systems 5035 / Blue Sea 5035 ST Blade Fuse Block w/Cover
Generic
CECOMINOD039212
8.00 x 4.00 x 2.00 inches
0.40 pounds
Our Score
Product Features
Provides Outstanding Savings While Providing Premium Quality
With This High-Quality Product, You Get More For Your Money
Product is excellent.
100% Affidavit of Affidavit%
TOP 12
Blue Sea Systems 7721 Fuse Block Safety SEA/AMG
Blue Sea Systems
7721
7.75 x 4.00 x 2.00 inches
0.50 pounds
Our Score
Product Features
Fuses are protected from the harsh marine environment by a sealed cover.
Ignition Protected Ignition For Use On Gasoline Or Diesel-Powered Boats
The Abyc/USCG Insulation Requirements are met by the Insulating Cover.
TOP 13
Pico 1598D Electrical Wiring Brass ATO Fuse Block Terminal 5 Per Package
Pico
1598
0.13 pounds
Our Score
Product Features
0910 Fuse Block is recommended for use.
Fuse Block Terminal for Ato
5 pieces per package
TOP 14
Blue Sea 5502 Fuse Block Class T 225-400 Amp
Blue Sea Systems
457650
9.00 x 8.00 x 3.00 inches
1.10 pounds
Our Score
Product Features
Mpn: 5502
TOP 15
Thor THANLFB-400-750 ANL Fuse Block 400-750 Amp
Thor
THANLFB-400-750
8.00 x 10.00 x 6.00 inches
Our Score
Product Features
Material of the Connection Post: Stainless Steel is a type of metal that is corrosion resistant
Fuse Block for Amperage
Washer for the Lock: Stainless Steel is a type of metal that is corrosion resistant
Washing Machine, Flat: Brass
Material of foundation: Nylon with a glass fill
TOP 16
ASI AFB01G3P DIN Rail Mounted Class CC Fuse Holder
Automation Systems Interconnect
AFB01G3P
Our Score
Product Features
Fuse Access, Installation, and Removal Made Simple
Fuse Holder for Class Cc, 3 Poles
Certified by the Csa and recognized by the Ul
Screw Clamp Connections That Are Simple To Wire
TOP 17
Slimline 12 Volt 6-Terminal Fuse Block
Speedway Motors
5.00 x 2.00 x 2.00 inches
1.00 pounds
Our Score
Product Features
With an 8 gauge input wire, there are six terminals on this power block.
Will Guard Against Voltage Spikes And Power Surges In Modern Solid State Devices
The Ato/Atc Fuses are commonly used.
Screws and Dust Cover
Each circuit should have a maximum of 30 amps and a maximum of 65 amps.
TOP 18
Sierra International FS40520-1 Standard Fuse Block
Sierra International
FS40520-1
1.50 x 3.06 x 9.06 inches
0.05 pounds
Our Score
Product Features
Package Dimensions of the Item: 555 centimeters long by seven centimeters wide The dimensions are 62 centimeters wide by 20 centimeters long. 574 centimeters x 574 centimeters x 574 centimeter
Type of product: Block at the end
Package Quantity: Item Package Quantity: Item Package Quantity: Item Package
Origin: United States United States of America
TOP 19
Mersen 20313 Class H and K Non-Spring Reinforced Fuse Block
Mersen
GOS20313
0.25 pounds
Our Score
Product Features
All Class H, K 250 Power Fuses are compatible with this product.
Non-Class H And K Non-Class H And K Non-Class H And K Non Fuse Block with a Spring Reinforcement
Connector for Screws
Molded glass is used as an insulator. Gfpc (Glass Fiber Polycarbonate) is a type of polycarbonate that is filled with glass fibers.
All of the fuse clips are made of a tin alloy with a high conductivity. Copper Plated with a Non-Stick Coating Clips With Spring Reinforcement In 30A
TOP 20
4 Position Mini/ATM Compact Fuse Panel
Crimp Supply
LEPUSPTLSHI7222
Our Score
Product Features
32 Vdc
TOP 21
Square D 9080-PF-1 Fuse Block 9080PF1
Square D
1.00 x 1.00 x 1.00 inches
0.50 pounds
Our Score
Product Features
Vac: 250
Amps:
TOP 22
Electronics-Salon DIN Rail Mount 10 Position Power Distribution Fuse Module Board
Electronics-Salon
7034
0.35 pounds
Our Score
Product Features
Voltage Required for Work: Total Current Rating: 40Amp, Ac Or Dc 532V. Dimensions of the printed circuit board (PCB): The dimensions are 150 x 72 millimeters. (W X L X H): 5 mm x 29 mm Size of the module: (W X L X H) 153 mm x 87 mm x 53 mm
Power Distribution Fuse Module Board for Din Rail Mount.
1 To P2- The following are the ten output terminals: Pitch - 5Mm/0. Maximum Current 10A For Each Position, Wire Size 2612 Awg, Stripping Length 7Mm, Metric M2. 295", Maximum Current 10A For Each Position, Wire Size 2612 Awg, Stripping Length 7Mm, Metric M2. Screw with five slots
P1 Terminals for Output: Pitch - 08Mm/0. 2", 10A maximum current per position, wire size 2612 Awg, 7Mm stripping length, Metric M2. Screw with five slots
Terminals for supplying information: Pitch - 62Mm/0. 3" Current 30A Per Position, Wire Size 2610 Awg, Stripping Length 8Mm, Metric M3 Slotted Screw
TOP 23
Littelfuse 3 Pole Fuse Block 30A 600V L60030M3SQ ! WOW
Littelfuse
L60030M3SQ
5.00 x 4.00 x 4.00 inches
2.00 pounds
Our Score
Product Features
Littelfuse is a company that specializes in the production of
TOP 24
Blue Sea Systems ST Glass 6 Circuit Fuse Block
Blue Sea Systems
5018
8.00 x 4.00 x 2.00 inches
0.20 pounds
Our Score
Product Features
All conductive parts are insulated, meeting Abyc/USCG requirements, and spare fuses are stored in the cover.
Accepts Agc (Fast Acting), Mdl (Time Delay), and Other 3Ag Glass Fuses
Tin- Phosphor bronze fuse clips and plated copper busses provide a circuit with a 30 amp rating.