19 Of Best Guitar Amplifier Footswitches Controllers In 2024
TOP 1
Hosa FSC-385 Footswitch, Guitar-style
HOSA
FSC 385
10.00 x 7.00 x 2.00 inches
0.82 kilograms
Our Score
Product Features
Its sturdy, extruded aluminum chassis ensures that it can withstand the rigors of the road.
Guitar- Dual-Styled Latching
Simply connect a 1/4 inch Trs cable (sold separately) from the footswitch to the unit you want to control, and you're ready to go.
Signal Processor On-Board, Designed For Guitar Amp Channel Switching Switching on and off, as well as other electronic device functions
TOP 2
HOTONE Dual Footswitch Pedal Momentary 2-Way Pedal Switcher Foot Controller Ampero Switch 1/4-Inch
HOTONE
4.76 x 1.65 x 3.70 inches
0.47 pounds
Our Score
Product Features
This Dual Footswitch Pedal Is Designed With A Temporary Footswitch
Ultra- Dual Footswitch Pedal Controller in a Small and Lightweight Package
With this Temporary Dual Footswitch Foot Controller, a Trs Cable (80cm) is included.
This Pedal Switcher does not require a power supply.
Great External Footswitches For Ampero Guitar Effects Pedal And Other Multi Effects Devices *Pedal Or Digital
TOP 3
JHS Little Black Amp Box Signal Converter
JHS Pedals
Little Black Amp Box
6.00 x 3.00 x 3.00 inches
1.00 pounds
Our Score
Product Features
Allows you to really push your amp's front end for a natural sound and tone that you can't get any other way.
Runs through the effects loop and controls the amount of signal sent to the power section to tame a screaming loud tube amplifier.
At lower levels, keep the response and tone of your amp's sweet spot.
The use of passive design does not necessitate the use of any energy.
Components of the highest quality keep your tone clear and pure.
Designed To Fit Into Your Rig Compactly, Sturdily, And Easily
Can Be Easily Installed Under Your Pedalboard
TOP 4
DigiTech FS3X Three-Function Foot Switch
Other
FS3X Foot Controller
7.25 x 2.25 x 4.81 inches
0.36 pounds
Our Score
Product Features
For The Jamman, Loop Selection And Auto Record
Digitech Fx Pedals Can Be Controlled Without Using Your Hands With A Footswitch Output
Metal Chassis with 3 Buttons for Durability
Expression Factory Pedals And Control Functions Of The Hendriz Experience
TOP 5
BOSS, 1/4-Inch Straight Metal Dual Footswitch
BOSS
FS-6
3.63 x 7.44 x 1.75 inches
1.10 pounds
Our Score
Product Features
Each footswitch has the ability to be assigned a latch. Or it could be a one-time event. Type
Power Source: Dc 9 V: 6F22 (Carbon), 6Lr61 (Alkaline) Dry Battery/9 V (Best With Polaroid 9V Batteries)
For a single stereo cable connection, there is a stereo input jack.
It can be used with a wide range of instruments, including Rhythm Machines, Guitar Amps, and so on.
Accessorize with: Owner's Manual for a 9 V dry battery (6F22).
TOP 6
Fender 1-Button FootSwitch
Fender
0994049000
7.09 x 7.09 x 4.25 inches
0.50 pounds
Our Score
Product Features
For use with newer Fender amplifiers, a 1/4" jack is included.
Single- For Fender Amplifiers, a Button Footswitch
The FM, Mustang, and Blues Junior Amps are all compatible.
TOP 7
Fender Electric Guitar Amplifier Footswitch
Fender
0234506000
11.42 x 7.48 x 3.54 inches
0.25 pounds
Our Score
Product Features
In the off position, true hardwire bypass allows players to keep their natural tone without interfering with or losing signal.
The use of led lighting necessitates the use of 9-volt batteries. Volt Battery Or Power Source (Polaroid 9V Batteries Work Best)
Metal chassis and switches are built to withstand onstage wear and tear.
Switching options such as "A or B" and "A and B" give your rig more versatility.
TOP 8
MOOER Candy Series Transparent Clear Guitar Footswitch Toppers
MOOER
Our Score
Product Features
Visually Brighter, More Transparent Appearance Designed Specifically For Guitar Effects Pedals With Leds Surrounding Their Footswitches
Mooer Ft- Tr Footswitch Toppers Are Plastic Bumpers That Are Designed To Be Installed On Pedals With A Standard 10Mm Footswitch Topper. Fits All Mooer Pedals As Well As Most Other Pedal Brands
Wearing Firmly To Protect Your Pedal Footswicth Topper From Scratches And Easily Taking Off
Simply increase the size of your Pedal Activation Footswitch to make Pedal Activation and Deactivation much easier and more comfortable.
A package of 10 clear footswitch toppers is included. Fits All Mooer Products As Well As Most Other Brands Of Guitar Effects Pedals
TOP 9
GHOST FIRE Guitar Effect Pedal Footswitch Foot Nail Cap Pad Cover Aluminum Tools Parts Foot Switch Toppers Knob Accessories
GHOSTFIRE
Our Score
Product Features
The Outer Diameter Is 23Mm And The Inner Diameter Is 10Mm For The 3/8" 10Mm Switch, Which Is Used For The Common 3/8" 10Mm Effect Pedal Switch. Switches of other sizes are not compatible with this product.
a total of three screws Three screws and a rubber pad protective cap are located on the top of the unit. The Foot Switch Can Be Protected Effectively With A Rubber Insert.
When installing the switch, make sure it's fully engaged before tightening the set screw.
Make it easier to see and step on larger goals to improve accuracy and comfort. Your Pedal Appearance Has Improved, and It Appearances As If It Has Been Upgraded.
Aluminum and hard aluminum are anodized, durable, and multi-purpose materials. Color that does not fade and lasts.
TOP 10
KAISH Pack of 5 Box Stomp 9-Pin 3PDT Electric Guitar Effect Pedal Switch Push Button Footswitches True Bypass Blue
KAISH
5xK1363
Our Score
Product Features
Ring Epoxy for High Temperatures; Casing made of high-temperature plastic; Internal Components of the Highest Quality
These switches are typically found in guitar effects pedals and audio equipment, and are made of high-quality materials.
For True Bypassing/Unbuffered Bypassing Of The Effect Circuit Without Coloring The Tone Of The Instrument Or Other Signal Chain Components.
At Least 7/8" Depth And 1/2"-Inch-Inch-Inch-Inch-Inch-Inch- A mounting hole with a diameter of at least 1 inch is required. 7/16" is the height of the threaded portion.
True Bypass as well as switching an LED are both possible with three poles. This can also be used as a two-pole switch by disconnecting three of the pins.
TOP 11
SOLUTEK Pedal Footswitch Topper with 3 Screws and Rubber Insert Fit Tightly
SOLUTEK
Our Score
Product Features
[For 3/8" 10Mm Switches] Outer Diameter 23Mm Inner Diameter 10Mm For Use On Most 3/8" 10Mm Effects Pedal Switches Switches of other sizes will not fit.
[3 Screws] Three set screws and a rubber insert keep the Solutek toppers firmly in place, while the rubber insert also protects the Pedal Switch.
Duraluminum Durable Never Crush And Everlasting Color By Anodic Oxidation Finish [Aluminum] Durable Never Crush And Everlasting Color By Anodic Oxidation Finish [Aluminum] Durable Never Crush And Everlasting Color By Anodic Ox
[Installation] As you tighten the set screws, press to fully engage the switch. Please send an inquiry if you have any questions.
Easier To See And Hit With A Larger Target [Increase Accuracy Comfort] There will be no sting to your feet. In addition, your pedalboard appears to have been upgraded.
TOP 12
Neewer 1-Button Footswitch with 1/4” Mono Male to Male Cable
Neewer
40089529
0.97 pounds
Our Score
Product Features
[Channel Switching] An easy-to-use channel switcher for guitar and bass. With On/Off Switching Capability, It Works With A Wide Range Of Guitar Amps
[Connect The Single-Button Footswitch] Using the 1/4 Mono Male To Male Cable, connect a button footswitch to a standard mono 1/4 input. Musicians of all levels will benefit from this book.
[Notes] This Footswitch Can Be Used With Guitar Amplifiers That Have A 1/4 Jack For A Footswitch Connection. It is only capable of controlling a single channel (not dual channels). The Guitar and Stool in the Photographs Are Not Included.
[Metal Button] For added durability, the button is made of metal.
The Push-Button Switch is used to control the circuit. The included 1/4 Mono to 1/4 Mono cable and a button switch make it simple to connect and disconnect the circuit from a distance. Any standard audio cable with 1/4 mono plugs can also be used.
TOP 13
ESUPPORT 3PDT 9 Pins Box Stomp Guitar Effect Pedal Foot Switch True Bypass Metal Pack of 5
ESUPPORT
CXGTS01A
0.11 pounds
Our Score
Product Features
If you're looking for a unique way to express yourself, try using the words "elect Effects Pedals from Harmonix, T Rex, Retro Fx, Radial Bigshot, and others
To Rewire Vintage Padals And Effect Boxes
Each switch has a total of nine lugs, three per pole.
The third pole can be used to control a status light or any other custom function.
For True Bypassing/Unbuffered Bypassing Of The Effect Circuit Without Coloring The Tone Of The Instrument Or Other Signal Chain Components.
TOP 14
BOSS Amplifier Foot Controller
BOSS
GA-FC
19.76 x 17.99 x 6.54 inches
Our Score
Product Features
Connect two expression pedals* at the same time for real-time volume and drive control.
Instantly switch between four channels and two routes of loops, reverbs, and boost settings, among other things.
Product Compatibility: Cube-based Blues Artist, Blues Cube Artist212, Blues Cube Tour, Cube-based Blues Artist, Cube-based Blues Artist, Cube-based Blues Artist, Cube-based Blues Cube-80Gx-80Gx-80Gx-80Gx-80G 40Gx, Ga- 212, Ga- Katana- No. 112 Katana- 100/212 Katana-100, Katana-100, Katana-100, Kat Waza Tube Amp Expander, Acoustic Singer Pro, Acoustic Singer Live, Nextone Artist, Nextone Stage, Head, Acoustic Singer Pro, Acoustic Singer Live, Nextone Artist, Nextone Stage, Head, Acoustic Singer Pro, Acoustic Singer Live, Nextone Artist, Next
* Ev- 5, Fv- 500L, as well as Fv- Optional Expression Pedals For The Ga-500H Are Available As Well.
TOP 15
Marshall PEDL-90008 MG15FX/MG30FX/MG50FX/MG101FX Footswitch
Marshall
PEDL-90008
1.10 x 0.20 x 0.50 inches
1.30 pounds
Our Score
Product Features
The product's package weight is 2 lbs. 3 Inches
LED Panel Displays Amplifier And Tuner Statuscompatible With The Mg15Fx, Mg30Fx, Mg50Fx, Mg101Fx, Mg102Fx, And Mg100Hfx
The product's package has a 6 inch width.
The product's package is 13 inches long. 1 Inches
TOP 16
SOLUTEK Pedal Footswitch Topper Metal Buttons
SOLUTEK
7539515141
Our Score
Product Features
Aircraft Duraluminum is extremely durable, never crushing, and has an anodic oxidation finish that gives it an everlasting color.
Easier To See And Hit With A Larger Target [Increase Accuracy Comfort] And your feet will appreciate how painless it is. Your Pedalboard Also Appearances To Have Been Upgraded.
[Stay Firmly] Stay Enhanced By 3 Set Screws And Pre-Installed Pre-Installed Pre-Installed Pre-Installed Pre-Installed Pre-In Silicones that are extremely tight. The Pedal Switch is also well protected from direct metal contact by the silicone sleeve.
[Installation] As you tighten the set screws, press to fully engage the switch. Please send an inquiry if you have any questions.
Od23Mm and Id10Mm are used on common 3/8"10Mm effect pedal switches [for standard 3Pdt switch]. Use On Spst Switches (5/16"8) if you need them. Round - 5 mm Please Go To Www. Please Go To Www. Please Go To Www. Please Go To Www amazon. Or look for Solutek V2 on Amazon.com/Dp/B083C46Dvv.
TOP 17
Mustang GT Footswitch
Fender
0994071000
12.25 x 5.75 x 2.75 inches
1.87 pounds
Our Score
Product Features
The Mgt- 4 Footswitch Unlocks Mustang Gt's 60-mph Acceleration Functionality of the Second Looper
Buttons for recording, playing, overdubbing, and stopping
12' cable with 1/4 plugs is included.
Hands- The Chromatic Tuner is available for free, with colored LEDs for visual feedback.
Four- Users Can Select Various Presets And Effects From The Floor With A Button, Pedalboard-Friendly Unit
TOP 18
Jiayouy Guitar Effect Pedal Footswitch Toppers Foot Nail Cap Protection Cap
Jiayouy
Our Score
Product Features
A larger touchable surface improves the effectiveness of the effect footboard.
Plastic Footswitch Toppers in a Variety of Colors (10 Colors).
Provide complete protection for the foot switch on your effect pedal.
Diameter of the outer rim is 24 inches. 2Mm; For use with universal 3/8" (10mm) effects pedal switches, the inner diameter is 10mm.
For a more comfortable step, it is easy to fix the footswitch.
TOP 19
Dual Momentary External Footswitch for Drum Machine & Guitar Effects Pedal Foot Switch
Rowin
7539515094
Our Score
Product Features
The Left Footswitch For Filling/Rythms/Into The Recording Pedal (For Drum Machine) Makes The Rythms More Diverse. Add Intro/ End Rythms To Thepedal With The Right Footswitch
This Temporary Footswitch is compatible with Beatbuddy, Line 6 Hx Stomp, Nux Loopcore, Zoom G1Xon, and other similar products. It Isn't Going To Work For Gt- 1 Multi- Boss Rc 3 Looper Pedal And Effects Pedal Although it is of high quality, it is much less expensive than other brands.
Super Small Size, Light Weight, Easy To Use And Carry
dependable Designed to deliver rock-solid performance while standing up to heavy use.
Includes: 1/4 (6. Stereo cable with a diameter of 35 millimeters (mm).
Top Picks
Most Popular
Related