24 Of Best Aluminum Hole Saws In 2024
TOP 1
TCT Hole Saw Set, 16-53mm Tungsten Carbide Tipped Hole, 13 Pcs Carbide Hole Saw Kit with Titanium Plated Pilot Drill Bit for Stainless Steel, Metal, I...
KWESOR
YINGKAIKONG01-13PCS
Our Score
Product Features
Cutting in a hurry: Hole Cutter Cuts Fast In Most Applications Thanks To Carbide Technology And Optimized Tooth Geometry. The Concentricity Rate of this Carbide Hole Cutter Allows It To Cut Very Smooth Holes Precisely.
Protected Variable Teeth Technology and three distinct cutting edges are used in this Carbide Hole Saw Set to balance the cutting and make the blades more durable, sharp, and efficient for cutting hard metal.
Wide Range of Use: This Stainless Steel Hole Cutter's 1/2-inch cutting depth makes it easy to cut through thick materials like: Thick metal, stainless steel, iron pipes, aluminum, brass, and sheet metal plate are just a few of the materials available.
Material of High Quality: Our Hole Saw Set is made of Tct Carbide (Tungsten Carbide Tipped Cutters) of the highest quality. Titanium Grade – The high hardness, rust resistance, and durability of plate cemented carbide teeth is ensured.
The following is included in the package: 13 Carbide Hole Saws are included in the package: 16Mm(5/8), 18Mm(45/64), 20Mm(25/32), 22Mm(55/64), 25Mm(63/64), 26Mm(1-64), 28Mm(1-64), 28Mm(1-64), 28Mm(1-64), 28Mm(1-64), 28Mm(1-64), 28Mm(1-64), 28M 1/32) 28 mm (1 mm) 30Mm (1- 7/64), 7/64, 7/64, 7/64, 7/64, 7/ 35Mm(1- 3/16), 3/16), 3/16, 3/16, 3/16, 3/16, 3 3/8), 40 mm (1-inch) 37/64), 45 mm (1-inch) 50Mm (1-49/64), 49/64, 49/64, 49/64, 49/64, 49/ 53Mm(2-), 31/32, 31/32, 31/32, 31/32, 31/32 3/32). A Wide Range Of Sizes To Meet Your Specific Needs
TOP 2
HSS Hole Saw Kits for Metal, 15pcs High-Speed Steel Hole Saw Bits, Sharp and Durable, for Cutting Holes on Wood, Plastic Sheet, Stainless Steel, Iron,...
Lovefish
LF-0030
Our Score
Product Features
[Resistance And Longevity] - The Hole Saw Kit Is Made Of Hss (High-Strength Steel). Steel with a lot of speed The saw blade is extremely sharp, consumes little energy, is long-lasting, and is resistant to impact and wear.
[Hole Saw Kits] – [Hole Saw Kits] – [Hole Saw Kits] There are 15 different sizes of hole saws to choose from. You can start cutting holes as small as 15mm/0. From 59 inches to 3 millimeters and two millimeters and two millimeters and two mill 1Enter in accordance with your requirements.
[Applications] - [Applications] - [Applications] - [ The Hole Saw Kit's Carbide Teeth Are Capable Of Cutting Clean, Round Holes In Stainless Steel, Mild Steel, Iron, Aluminum Plate, Alloy Plate, Plastic Sheet, Copper, And Brass.
[Personal Package] - Each HSS Hole Saw is packaged in its own plastic box. They're simple to work with and store.
[Extremely Difficulty] – The saw blade has been quenched and has a high hardness and strength (Hardness 59-70). 60Hrc). Hole Saw Kits can drill to a depth of about 7/9" for wood and 1/5" for stainless steel.
TOP 3
M42 HSS Hole Saw Set, Ankoow 9Pcs 16-38mm Heavy Duty Hole Saw Tooth Cutting Opener Drill Bit for Wood Aluminum Iron Sheet Pipe Plastic
Ankoow
FBA_M42-RD-9
1.70 pounds
Our Score
Product Features
Simple to Work With: During use, you will be able to easily distinguish between different models. Boost your work efficiency. You Can Use Different Models According To Their Size To Meet Your Different Requirements, Easy To Use. You Only Need To Be Based On Different Models In Order To Play The Hole You Desire, Whether It Is Large Or Small Holes.
In one set, there are 9 different sizes of hole saws: 16 mm, 18 mm, 20 mm, 22 mm, 25 mm, 30 mm, 32 mm, 35 mm, 38 mm, A Set Of Solutions To All Dimensions Of The Problem
Wide Range of Use: Suitable for Pistol Drills, Bench Drills, Vertical Drilling Machines, and other similar applications. Plate Hole, Home Wood, Galvanized Pipe, Fire Pipe, Plastic, Soft Metal, Gypsum Board, and Other Opening Operations are all common applications. note: It is not recommended that this product be used in hard wood, hard metal, or stone.
Packaging that is distinct: Each drill is packaged separately to make it easier to transport and find the required specifications, as well as to protect them from damage during transit.
Precision Quality Assurance: The blade is made of M42 HSS steel, which is sharp and has a high hardness. Strong and long lasting.
TOP 4
AUTOTOOLHOME 2 inch Metal Steel Hole Saw Tooth Carbide Tip TCT Drill Bits Kit
AUTOTOOLHOME
00443
Our Score
Product Features
The gears are made of Yg8 Tungsten Carbide Steel and range in rigidity from 64 to 65 HRC.
Tct Drill Bits Can Be Used With Handheld Electric Drills, Beach Drills, and Stand Motors. Drilling Machine With A Motor And A Mobile Ribbon Type Magnetism Drilling Machine
The Hole Saw is equipped with a center twist drill bit that can drill up to 3/4 inch in depth for wood and 3/16 inch in thickness for steel.
Sharp Gears And Anti-Theft Devices Cutting with less consumption results in a longer service life for the product.
Teeth made of carbide for cutting clean, round holes quickly. Drilling with stainless steel plate, high alloy steel, iron, aluminum, castings, plastic, metal, wood, and other materials
TOP 5
WORKPRO Hole Saw Kit, 11 Piece, Bi-Metal Hole Drills, High Speed Steel M42 Drill Hole Cutter with Mandrels in Hard Case for Cutting Stainless Steel, B...
WORKPRO
10.63 x 7.68 x 3.35 inches
Our Score
Product Features
Tooth Design That Is More Optimized - precision-oriented The cutting surface is smoother and more even thanks to the ground tooth design. These saws also have a bi-directional blade. Metal material that quickly and easily cuts both wood and metal. Especially well-suited to the cutting of sheet metal: The thickness of the cut is 0 millimeters. 08 ~ 0. 2 Inch, depending on the metal's hardness and the drill used (bench or pistol).
Durable - It has a larger bi-fold door. Metal section and high cobalt hss teeth provide excellent performance and long-term durability. The ability to last. To prevent warping and threading, each hole saw is made with hardened backing plates. Two Pilot Drills are made of premium high-performance materials. Speed Steel is used for precise positioning and rapid drilling, resulting in a much longer service life.
What You Will Receive - A sturdy storage case is included with the set. It has a variety of hole sizes, including 3/4, 7/8, and 1-inch. 1/8, 1- 3/8, 1- 1/2, 1- 3/4, 2 and 2 1/4, 2- 1/2; A large pilot drill and a small pilot drill are also available. The Hole Saw Set as a Whole Can Meet Your Needs, and It's Perfect For Cutting Sheet Metal, Aluminum, Wood, Plastic, Plasterboard, and Other Materials.
Mechanism for Quick Loading - The Hole Saw incorporates a new type of quick loading mechanism that allows for fast loading without the use of washers or nuts, and the thread design keeps the Hole Saw more stable while cutting, resulting in a more standard cutting hole.
Affordability - The saw comes with a small quick change mandrel and a large quick change mandrel, all of which are packaged in a handy carrying case that keeps all of your parts organized. Imperial and metric measurements are printed on saw blades.
TOP 6
LENOX Tools Hole Saw with Arbor
Lenox Tools
1772779
5.70 x 3.30 x 2.70 inches
0.40 pounds
Our Score
Product Features
Increased Wall Thickness Increases Durability While Reducing Tooth Loss
2X more durable than previous Lenox hole saws with 50% longer life than previous Lenox hole saws with 50% longer life than previous Lenox hole saws with 50% longer life%
Design of a Speed Slot Staircase for Easier Plug Ejection
Metal is easily penetrated by a tooth design that has been optimized.
Teeth that are larger and sharper for faster cutting
TOP 7
25mm TCT Hole Saw, 1” Cutting Diameter Tungsten Carbide Tipped Hole Cutter, for Stainless Steel, Metal Plate
NGe
Our Score
Product Features
Well-made of HSS high-speed steel, with a razor-sharp blade, low consumption, and durability with impact and wear resistance.
Cutting Edges with tungsten carbide tips last longer and can be used at higher rates and speeds, with a diameter of 25 mm (1") and an effective length of 25 mm.
A built-in over-drill flange prevents penetration beyond the sheet metal.
Specifically designed for cutting 10 mm sheet metal and 3 mm stainless steel plate.
Coated with high-quality diamond to speed up drilling and produce a sharp, precise, and smooth cut with no broken edges.
TOP 8
Rannb Carbide Hole Saw 4.5-inch/115mm Cutting Dia Hole Cutter
Rannb
Our Score
Product Features
Cutting Diameter: [Dimension] 115Mm /4. 5" ; Diameter of the Shank: 10Mm/0. Depth of Cut Maximum: 25Mm /1"
[Material] Our hole saw is made of premium Tungsten Carbide Tipped (Tct) with a high hardness and wear resistance.
1 x Hole Saw Drill Bit 2 x Pilot Drill 1 x Hex Wrench are included in the package.
The Pilot Drill Bit Is Used To Precisely Locate The Position And Protect Carbide Teeth From Impact When The Pilot Drill Bit Through The Cutting Material.
[Applicable Materials] Quick, Precise, Smooth Cuts Into Up To 5Mm27Mm Thick Material, Specifically Designed To Cut Alloy, Iron, Stainless Steel, And Other Materials
TOP 9
BI-Metal Hole Saw , HSS Hole Saw with Heavy Duty Arbor
KKMOSS
Our Score
Product Features
High- Shock-resistant teeth and tooth strippage resistance are provided by a cutting edge made of speed steel. Soft, spring steel creates a flexible backing material for the hole saw, allowing it to absorb the impacts of drilling holes in difficult-to-reach places. Materials should be cut down.
These Hole Saws Are Ideal For Work Where High Performance And Accuracy Are Required. They Only Take One Pass To Cut Through Studs. Cutting Wood, Plastic, Machinable Metal, Nail Embedded Wood, Plywood, Pipes, and Steel is a breeze.
A versatile cutter that can be used for a wide range of tasks; Plumbing, construction, aircraft, electrical, maintenance, and automotive applications all benefit from this product.
The Teeth Are Electron-Conducting Welded to Shatterproof, Shock-Resistant Steel Individual Boxes of Absorbing Alloy Bodies Note: Arbor is a part of the package.
Due to its variable pitch teeth, it cuts faster, smoother, and with less vibration than the competition. Creates holes for the installation of pipe and tubing, door locks, electrical conduit, hoses, and antennas.
TOP 10
LDEXIN 3" / 75mm Cutting Dia. Tungsten Carbide Hole Saw Heavy Duty Thick Metal Sheet Wood Steel Cutter Drill Bits
LDEXIN
Our Score
Product Features
Fast drilling speed is possible thanks to the optimized tooth design, which also includes an optimized pilot bit for metal drilling.
3" / 75mm Hole Cutters, Tungsten Carbide Steel Gears, Specifically Used On Metal And Steel Plate, Carbide Tipped Teeth For Extra Long Lifespan
Suitable for Pistol Drills, Bench Drills, Vertical Drilling Machines, and other similar applications. Plate Hole, Home Wood, Galvanized Pipe, Fire Pipe, Plastic, Gypsum Board, and Other Opening Operations are all common uses.
It features an ejection spring for easy plug ejection, as well as a raised shoulder to prevent break through. Comes with a hex wrench to make your job easier and more convenient.
TOP 11
JIECHENG HSS Bi-metal Hole Saw With Arbor Mandrel 4-inch 102 mm For Metal,Stainless Steel,Cornhole Boards,Drywall,Plastic,Brass
JIECHENG
4.02 x 4.02 x 1.77 inches
608.00 grams
Our Score
Product Features
Inch Hole Saw With Mandrel And Hss Drill Bit It Is Difficult To Drill Holes In Metal Or Wood. Aluminum and stainless steel It Can Make Holes In 4-Inch Cornhole Boards,Plastic,Rubber,Drywall,Fiberboard,Pvc Pipe,Plywood Diameter of an inch
Material: M42 Bi-Structured High-Speed Steel Metal
Please use caution when working; it is preferable to wear safety glasses. Drill at first at a low speed, then at a higher speed. Between the teeth, there is a 4-inch gap.
The cutting depth is approximately 38 millimeters, and the total height is approximately 44 millimeters.
TOP 12
XINGYHENG 5 Piece High Speed Steel Hole Saw Drill Bit Aluminum Plate Hole Saw Cutting Kit Drill Bits Opener Cutter Tool Drilling Bit Set 16mm 18.5mm 2...
XINGYHENG
Our Score
Product Features
16Mm/0 is a different size. 62'',18. 5Mm/0. 20 Mm/0, 73'' 78'' x 25Mm/0 98'' x 30Mm/1 Total Length 65Mm/2, 18'', Interval For Each Specification). 55''.
Strictly Symmetrical Cutting Edge: Anti-Microbial Surface Rust Removal, Drilling Smoother, and Chipping Cutting That Is Both Beneficial And Efficient, With No Offset Drilling Big Space For Chip Removal, Big Space For Chip Removal, Chip Resistance Is Low, Chip Discharge Is Smooth, Hole Heat Is Low, And Drilling Is Reduced.
Sharpness of the cutting edge is exceptional: High Temperature Quenching To Improve Hardness, Hex Shank, Titanium Plated On The Surface The Drill Bit's Cutting Edge Is Sharper Than Before, Which Can Reduce Cutting Force, Reduce Drilling Rate, And Improve Hole Wall Quality.
Tungsten Carbide Bits, Complete Specifications, Made of Hard Alloy (Tungsten Steel) Material, With High Hardness, High Wear Resistance, High Strength, Bending Resistance, Resistance To Damage, And Other Characteristics
Fit For: Drills come in a wide range of sizes and shapes to meet the needs of various applications. All milling cutter parameters, such as core thickness and core taper, have been meticulously designed and tested, making it ideal for installing locks, knobs, and other hardware in doors and cabinets, as well as drilling larger diameter holes through desks and other furniture.
TOP 13
HSS Hole Saw Kits for Metal
Rocaris
Hole Saw Arbors
1.98 pounds
Our Score
Product Features
The temperature ranges from 64 to 65 degrees Fahrenheit. Sharp Gears And Anti-Theft Devices Cutting with less consumption results in a longer service life for the product.
The gears are made of hss, and the rigidity varies depending on the hole saw. The hole saw has an attached twist drill bit.
These 15-piece hole saws are the following dimensions: 15Mm/0. 16Mm/0, 59" 18Mm/0, 63" 20Mm/0, 71" 79"21Mm/0 22Mm/0, 83" 25Mm/0, 87" 26Mm/1, 98", 98", 98", 98", 98", 98" 28Mm/1 02", 02", 02", 02", 02", 02", 02", 02", 02 30Mm/1"/10"/10"/10"/10"/10"/10"/10"/10" 35Mm/1, 81" 40Mm/1, 38", 38", 38", 38", 38", 38", 38", 382, 45Mm/1, 57" 50Mm/1, 77" 97" x 53mm x 2mm x 2mm x 2mm x 2mm 09".
Cuts precise holes in Stainless Steel, Mild Steel, Iron, Copper, and Brass in a matter of seconds. For wood, you can drill to a depth of about 20mm, and for stainless steel, you can drill to a depth of about 5mm.
Teeth made of carbide for cutting clean, round holes quickly. suitable for use with a hand-held electric drill, as well as a stand motor- Drilling Machine With A Motor And A Mobile Ribbon Type Magnetism Drilling Machine
TOP 14
Hole Saw M42, Corn Hole Drilling Cutters, Heavy Duty Metal Hole Cutter for Wood Cornhole Boards Aluminum Plastic
Mudder
Our Score
Product Features
It's simple to use: The Saw Hole Cutter has a great cutting performance and comes with a non-stick coating. Binding Clean Edge Design, Simple To Operate, The Spring On The Drill Will Automatically Push The Disk Out Of The Saw After Drilling; Built Tough For Repeat Use With A High Hardness And Toughness
Material That Is Both Sturdy And Trustworthy: Corn Hole Saw Is Made Of A Durable And Reliable Material, With High Wear Resistance, Fast And Clean Cutting For Hard Materials, And Can Be Used On Perforated Cast Iron Panels, Aluminum Panels, Plastics, And Wood.
A Wide Range Of Applications: Wood Hole Cutter Is Designed For Cutting Wood, Plastic, Iron Plate, Ceiling Lamp, Cinder Wall, Corn Orifice Plate, And Corn Orifice Plate, It Is Handy And Portable, It Saves Time And Effort
Prepared To Use: Pointed Teeth With Low Vibration, Sturdy And Hard Drill Allows You To Operate In A More Stable And High-Performance Environment The Hole Saw Cuts Smoothly And Quickly Due To Its Efficiency And Clean Edge Design; Warm Note: Please double-check the size before making a purchase.
Fit For: The Mandrel And Bit Can Be Rotated Clockwise, Suitable For Most 1/2 Inch Bits, The Drilling Depth Is Up To 3 - 4 Inches, The Drilling Depth Is Up To 3 - 4 Inches, The Drilling Depth Is Up To 3 - 4 Inches, The Drilling Depth Is Up To 3 - 4 Inches, The Drilling Depth Is Up To 3 - 4 Inches, The Drill 25 Mm
TOP 15
Milwaukee Electric Tool 49-56-0173 Ice Hardened Bi-Metal Hole Saw
Milwaukee
49-56-0173
3.50 x 4.80 x 4.80 inches
0.57 pounds
Our Score
Product Features
Long-Lasting Design - Long-Term Use
Saw with three holes
Teeth Stress Is Reduced With Radiuses Tooth Back
Teeth are less stressed with a radiated tooth back.
For quick cutting, use a positive rake angle.
For quick cutting, use a positive rake angle.
Bi- Matrix Ii Matrix Ii Matrix Ii Matrix I Teeth made of metal for increased durability
Bi- Matrix Ii Matrix Ii Matrix Ii Matrix I Teeth made of metal for increased durability
Ideal for cutting slots that are wide, angled, or offset.
Ice That Has Been Hardened For Up To 50 Years In comparison to the competition, you can expect a 5% increase in life expectancy.
Ice That Has Been Hardened For Up To 50 Years In comparison to the competition, you can expect a 5% increase in life expectancy.
It has a lot of cutting power.
Deeper gullets allow for faster chip removal, while functional slot geometry allows for easy plug removal.
Deeper gullets allow for faster chip removal, while functional slot geometry allows for easy plug removal.
TOP 16
80mm HSS Tungsten Carbide Hole Saw, TCT Cutter Drill Bit for Metal Stainless Steel Wood Aluminum
ZLYY
Our Score
Product Features
Resistant And Long-Lasting: The hole saw is made of HSS high-speed steel and has an extremely sharp blade. It is also low-consumption and durable, with impact and wear resistance.
Dimensions: 80 mm (3-inch) 5/32) Diameter of Hole Saw, 84 Mm(3. 3) Length: 10 millimeters (0. Shank, number 39.
All-In-One Concept: There is no need to purchase additional accessories because the drill bit, spring, and wrench are all included.
A Broad Range Of Applications: Hand-Held Electric Drills, Vertical Electric Drills, and Mobile Belt Magnetic Drilling Machines are all compatible with Hole Saw Kits.
Precise And Timely: The Hole Saw's Tungsten Carbide Teeth Can Cut Clean, Round Holes In Stainless Steel, Mild Steel, Iron, Aluminum, Alloy Plate, Plastic Sheet, Copper, and Brass.
TOP 17
Koopi 4.5" Hole Saw with Heavy Duty Arbor
Koopi
Our Score
Product Features
[In a hurry] Hole Cutter Performance Is Improved By A Variable Tooth Design And High-Quality Material - Precise Cuts is a four-letter word that describes how precise the cuts are. 5In Holes In Drywall, Ceiling Tiles, Steel, Wood, Plastic, Stainless Steel, And Mild Steel, Metal, And Aluminum
[Sturdy Body Building] - The Fourth Wall Is Thicker. The 5 Inch Hole Saw is made of M42 high-strength steel and has a bi-directional blade. Increases tooth durability and reduces tooth loss by using metal.
[Deep Cut Design] - 38 mm (1.25 inch) cutting depth 5"), it will cut more material in a single pass.
[Arbor Comes With You] - The 4- A Heavy Duty 7/16 Hex Shank Quick Change Locking is included with the 1/2 Hole Saw. A Hex Key, as well as a Pin Mandrel and a Bonus Replacement Pilot Drill Bit. All 1/2" Chuck Drills are compatible with the Hole Saw Arbor.
[Guarantee of 12 Mouths] - Buy With Confidence Because Of Our Unbeatable 2012 Mouths Warranty And 30 Day 100% Satisfaction Guarantee! We Value Our Customers' Shopping Satisfaction And Will Work With You To Solve Any Issues You May Have.
TOP 18
42mm TCT Hole Saw, 1-5/8” Cutting Diameter Tungsten Carbide Tipped Hole Cutter Opener, for Stainless Steel Metal Plate Aluminum
NACX
Our Score
Product Features
Made of high-strength steel, with a razor-sharp blade, low consumption and durability, and impact and wear resistance.
Cutting Edges with tungsten carbide tips last longer and can be used at higher rates and speeds; the cutting diameter is 42 mm (1-inch). 5/8"), 25Mm(1) Effective Depth
Drill Bit, Spring, and Hex Wrench are all part of the integrated design. The Bit Is Prevented From Walking With A Split Point Pilot Drill Bit.
Stainless steel, sheet metal, fiberglass, and wood can all be cut quickly and precisely with this machine.
Diamond-coated edge improves drilling speed and results in a sharp, precise, and smooth cut that is free of breakage.
TOP 19
HLOFIZI 7/8" Hole Saw Carbide Hole Saw Tungsten Carbide Hole Cutter
HLOFIZI
0.87 x 0.87 x 3.00 inches
Our Score
Product Features
Cutting in a Hurry Grinding Tungsten Carbide And Ultra-Fine Tungsten Carbide Cutting Resistance Is Significantly Reduced Due To The Hard Tip Of The Cutting Edge
a wide range of applications Tungsten Carbide Cutting Edges and a HSS Center Drill are included in the 7/8-inch Hole Saw. Bores hard materials such as stainless steel, brass, cast iron, and fiber-reinforced plastic. Curved Face Or Reinforced Plate Ideal for a kitchen sink, an iron pipe, or a steel plate
100% Satisfaction - 100% Worry Free - 100% Worry Free - 100% Wor We Hlofizi Can Assure You That The Many Outstanding Features It Has To Offer Will Not Leave You Disappointed. We Provide 100% Satisfaction Solution In The Rare Case You Do Not Enjoy 7/8" Hole Saw, If You Need Any Assistance, Please Contact Us.
Performance that lasts longer - Compared to standard bi-metal hole saws, carbide hole saws have a 10X longer life span. Metal Hole Saw, With Boring Capacity Up To 0. Stainless Steel 3 Inch Thick
Simple to Work With - The HSS Pilot Drill allows for easy material centering and clean guidance. The Cut Material Is Ejected From The Carbide Hole Cutter Using The Ejector Spring
TOP 20
REETAI-FOUR 10Pcs TCT Hole Saw Kit
REETAI-FOUR
Our Score
Product Features
[High Quality Material] This Hole Saw Is Made From High-Quality Tungsten Carbide Tipped Cutters, Which Ensures Its Hardness, Rust Resistance, And Sturdiness. the High- Hole Saws are made with end-tungsten carbide technology and optimized tooth geometry to provide superior life and fast cutting in the most demanding applications.
[Included in the Tct Hole Saw Set]: 16Mm(5/8"), 18Mm(11/16"), 20Mm(3/4"), 22Mm(7/8"), 25Mm(1"), 30Mm(1-1/2"), 40Mm(1-1/2"), 40Mm(1-1/2"), 40Mm(1-1/2"), 40Mm(1-1/2"), 40Mm(1-1/2"), 40Mm(1-1/2"), 40Mm(1-1/2"), 40Mm 35Mm (1/8"), 1/8" (1/8"), 1/8" (1/8"), 1/8" (1/8") 45Mm (1-1/2"), 3/8" 3/4"), 50 millimeters (2"), and 53 millimeters (2") 1/8"), ten pilot drill bits, and one hex key a Wide Range Of Sizes To Meet Your Specific Needs
[Serious Service]: Drill Bit, Spring, and Wrench are all included, making your job easier and more convenient. It's possible to remove the pilot drill bit. Please feel free to contact us via email or Q&A if you have any questions about the product.
[Easy to Work With]: Teeth made of Tct Carbide Steel For Cutting Clean And Smooth Round Holes Quickly. They are appropriate for use with a hand-held electric drill and a stand motor. Drilling Machine With A Motor And A Mobile Ribbon Type Magnetism Drilling Machine
[Application]: [Application]: [Application]: [ These Hole Saw Sets Are Industrial Grade Metal Drilling Hole Cutter For Stainless Steel, Metal, and Iron, And They Provide Fast And Precise Cuts Into 28Mm Thickness Metal Material. It can also be used with plastic, aluminum, FRP, and other materials. Keep in mind to add coolant if your engine is running at a high temperature for an extended period of time. Drilling at a high rate.
TOP 21
Hegebeck HSS Hole Saw 15/16" Drill Bit Opener Cutter Drilling Tool for Stainless Steel Aluminum Alloy Thin Iron Plastic Wood 1 Pcs
Hegebeck
Our Score
Product Features
[Material]: [Material]: [Material]: [ Strong Hhs High-Density Polyethylene (HDPE) Speed- Steel is used for its tensile strength, high hardness, sharp edges, fast cutting, impact resistance, and high temperature wear resistance. Concentricity accuracy evens out the tooth edge and extends the life of the hole.
[Requirements]: Diameter of the hole: 5 millimeters / 15/16 inch Length in total: 70Mm / 2. 8Inch; Depth of the hole: 20 mm (approximately 4/5 inch); Diameter of the Shank: 2/5 inch / 10 mm Type of Shank: Shank with a triangular shape; Color: Black
[Warranty]: We promise to provide satisfied service to all of our customers; if you have any questions about the product, please contact us as soon as possible, and we will resolve the issue within 24 hours.
[Aspects]: The Hole Drill Is Constructed With A Spring, Which Aids Chip Removal And Drilling Efficiency; It has a hexagonal handle that provides a secure grip. It has a spring that prevents the drill bit from jamming when in use, and the spring will automatically push the Disc out of the saw after drilling is completed.
[Applications]: [Applications] [Applications] [A Designed for use with a hand-held electric drill and a stand motor. Fast And Precise Cuts In Stainless Steel, Sheet Metal, Cast Iron, Mild Steel, Aluminum, Plastic, Copper, And Brass; Provided By A Driven Drilling Machine And A Mobile Ribbon Type Magnetism Drilling Machine Perfect for installing locks, knobs, and handles on doors and cabinets, as well as drilling holes in desks and other furniture.
TOP 22
LENOX Tools Bi-Metal Speed Slot Arbored Hole Saw
Lenox Tools
1772426
6.40 x 2.50 x 1.70 inches
0.22 pounds
Our Score
Product Features
Increased Wall Thickness Increases Durability While Reducing Tooth Loss
2X more durable than previous Lenox hole saws with 50% longer life than previous Lenox hole saws with 50% longer life than previous Lenox hole saws with 50% longer life%
Design of a Speed Slot Staircase for Easier Plug Ejection
Metal is easily penetrated by a tooth design that has been optimized.
Teeth that are larger and sharper for faster cutting
TOP 23
Klein Tools 31902 Bi-Metal Hole Saw Kit
Klein Tools
31902
9.40 x 8.10 x 3.10 inches
2.60 pounds
Our Score
Product Features
The Most Common Sizes For Basic Electrical Work Are Included In This Kit: 7/8- Inch, 1- 1/8- Inch, 1- 3/8- Inch, 1- 3/4- Inch, 2- inch and two inches 1/2- Inch (2. 2, 2. 9, 3. 5, 4. 4, 5. 1 And 6. Saws (4 cm)
Teeth Pattern Optimized For Fast, Consistent Cutting Of Steel, Including Stainless Steel
Note: Set the Pilot Drill Point to 1/8-inch. Tooth Points Extending an Inch
Slug Removal Made Simple With Multiple Leverage Points
Two arbors are included, as well as a tough carrying case.
Cuts precise holes in a variety of materials, including mild and stainless steel, drywall, ceiling tile, laminates, wood, and plastic.
In A Single Pass, Bore Through 2X4S
TOP 24
Lenox Tools Bi-Metal Speed Slot Hole Saw
Lenox Tools
3001515L
3.63 x 1.69 x 1.69 inches
0.10 pounds
Our Score
Product Features
Increased Wall Thickness Increases Durability While Reducing Tooth Loss
2X more durable than previous Lenox hole saws with 50% longer life than previous Lenox hole saws with 50% longer life than previous Lenox hole saws with 50% longer life%
Design of a Speed Slot Staircase for Easier Plug Ejection
Metal is easily penetrated by a tooth design that has been optimized.
Teeth that are larger and sharper for faster cutting
Top Picks
Most Popular
Related