19 Of Best Aluminum Router Bits In 2024
TOP 1
Amana Tool - 51377 Solid Carbide CNC Spiral 'O' Single Flute, Aluminum Cutting 1/4 Dia x 3
Amana Tool
51377
Our Score
Product Features
(D) 1/4" Diameter
Direction - Up
L2 (Overall Length)
(D) 1/4" Shank
(B) 3/4" Cutting Height
TOP 2
SPEED TIGER ISED Carbide Spiral Router Bits Down Cut, 1/4” Diameter, 1” Cutting Length, 2-1/2"OVL for Wood/Oak/MDF/Aluminum -Made
SPEED TIGER
0.24 x 2.52 x 0.24 inches
Our Score
Product Features
For Hard Materials - High Performance Micro Grain Carbide Is Used To Make The Cutter, Which Is Extremely Tough, Resists Wear, And Provides Excellent Cutting Performance.
Cutter for a Wide Range of Applications - Working with wood, aluminum, copper, MDF, carbon steels (Hb225), alloy steels (Hb225325), and pre-hardened steels (Hb225325) is a breeze with Speed Tiger Carbide Tools. Cast iron, hardened steels (up to Hrc45), and hardened steels (Hrc4045).
High- Quality - In a world where everything is connected, flutes have a firm footing. Iso- class Factory certified to ISO 9001; At A Reasonable Price, You Can Get A Great Performance.
Down Cut, 1/4" Cutting Diameter, 1" Cutting Length, 1/4" Shank Diameter, 2" Full Length 1/2".
Support that is focused – To get the best performance out of your Speed Tiger Cutters, contact the seller via Amazon at any time for cutting condition data.
TOP 3
35 ROUTER BIT SET - 1/2" CARBIDE BITS KIT Half Inch Shank ALUMINUM CASE
EDMBG
22019
Our Score
Product Features
Shank: 35 Pc 1/2" Shank: 35 Pc 1/2" Shank: 35 P
Set of Router Bits
Aluminum Case with Deluxe Finish
Kit for Carbide
TOP 4
HUHAO Spiral 60 Degree V Groove Engraving Tool Flat Bottom CNC Router Bits 1/8 Inch Shank for Aluminum MDF Hard Wood Copper 5PCS
HUHAO
Our Score
Product Features
Set of Engraving Router Bits, Spiral Flute Cutting Tool, Straight 1/8 Inch Shank V-Type V-Type V-Type V-Type V-Type V-Type V-Type V-Type V-Type V-Type V-Type V-Type V- Cnc Router Bits V Groove,Mirror Finish,Woodworking,High Precision Bit,Cutter For Aluminum Mdf Hard Wood Copper,Cnc Router Bits V Groove,Mirror Finish,Woodworking,High Precision
Material: steel made of tungsten
The sharp edge of the V Groove Router Bit allows for fast engraving, resulting in increased efficiency. Oversized Spiral And Discharge Chips Are Used In The Design Of CNC Router Bits, Increasing Productivity.
Diameter of the Shank: 175 millimeters (or 1/8 inch) Degree: Diameter of the cutting edge: 1Mm; Length in total: 36Mm
Package: In one package, there are 5 pieces of CNC router bit, as well as a storage case.
TOP 5
Stalwart - 75-ST6041 Router Bit Set- 35 Piece Kit with ¼” Shank and Aluminum Storage Case By
Stalwart
75-ST6041
12.75 x 9.00 x 2.00 inches
3.35 pounds
Our Score
Product Features
Set with multiple functions - This Kit Is Great For Multipurpose Uses Because It Comes With 35 Pieces. It's ideal for woodworking, edging, trimming, grooving, and veining wood projects, and it's suitable for all skill levels of carpenters and hobbyists. An Allen Wrench is also included in this set for removing bearings.
Carbide Tipped Router Bits from Stalwart are made of high-quality materials and are built to last. This Durable Router Bit Set Will Allow You To Complete All Of Your Projects With Confidence, Thanks To The Sturdy Aluminum Case.
Details about the product: Included in the set are: R1/8 R1/8 R1/8 R1/8 R1/8 R1/8 R1/8
Simple to Store- The included aluminum case is sturdy and makes storing the high-resolution images a breeze. While in-the-field, high-quality router bits are a must. If you're in between jobs or working on a home improvement project, this is the time to do it. The case also aids in the protection of the bits when traveling to work on the go or to remote site locations.
TOP 6
Platinumedge Router Bits 35 Piece Set, 1/4" Shank Tungsten Carbide Tips, Aluminum Carry Storage Case
Platinumedge
Our Score
Product Features
[All Major Router Instruments (Handheld Or Benchtop Router Table)] Universal 1/4" Shank Is Compatible With All Major Router Instruments (Handheld Or Benchtop Router Table).
Precisely machined sharp Yg8 Tungsten Carbide Blade Makes Clean And Accurate Cuts On All Types Of Wood [Sharp Carbide Tipped Router Bits] Our Router Bits Set Surpass Single-Cutting-Edge Router Bits Because They Have Two Cutting Edges In order to make smooth cuts, you'll need edge bits.
These Tongue And Groove Router Bit Set Is Truly Versatile For Your Extra Convenience. In all woodworking projects, this tool is ideal for edging, trimming, veining, and grooving.
[Comes With Aluminum Storage Case For Easy Storage And Organization] [Well Storage And Carry Case] [Well Storage And Carry Case] [Well Storage And Carry Case] [Well Storage And Carry Case] [ While traveling to work, this bag is sturdy and protects the bits. After use, the box is labeled with a scale and can be returned to its original position.
Hardened Solid Alloy Steel Construction With A Powder Coating Finish For Durability And Longevity It's extremely well-built, sturdy, and dependable.
TOP 7
SpeTool 1/4 Shank Carbide End Mill for Aluminum Cut Non-Ferrous Metal Upcut CNC Spiral Router Bit
SpeTool
Our Score
Product Features
Route Bits with a Flat Top, 3-Pack Flute with an upcut for easy chip removal and a flawless finish. Machining in a clockwise direction.
1-Inch Solid Carbide Spiral Router Bit With 1/4-Inch Shank And 1/4-Inch Cutting Diameter, Solid Carbide Spiral Router Bit With 1/4-Inch Shank And 1/4-Inch Cutting Diameter, Solid Car 3-Inch Cutting Length, 1/2-Inch Cutting Length Total Length: 1/2 Inch
Carbide Endmill for CNC Routers and Plunge Routers with 1/4" Collets by Makita, Bosch, and Other Brands
For aluminum 6061, 7075, and other alloys Non- Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp
End Mill Bits Can Be Used For Side Milling, End Milling, Finish Machining, and Other Applications.
TOP 8
Amana Tool - 51434 Carbide Tipped Aluminum & Plastic Cutting Bevel Trim 45° x 31/32
Amana Tool
51434
Our Score
Product Features
45° angle (A)
D (diameter) 31/32
1/4" Shank (D)
1st Overall Length (L) 15/16
1/4" Cutting Height (B)
TOP 9
SpeTool 3 Flute Carbide End Mill for Aluminum Cut Non-Ferrous Metal Upcut CNC Spiral Router Bit
SpeTool
AU3E-D1/4
Our Score
Product Features
Route Bits with a Flat Top, 3-Pack Flute with an upcut for easy chip removal and a flawless finish. Machining in a clockwise direction.
1-Inch Solid Carbide Spiral Router Bit With 3/8-Inch Shank And 3/8-Inch Cutting Diameter, Solid Carbide Spiral Router Bit With 3/8-Inch Shank And 3/8-Inch Cutting Diameter, Solid Car 3-Inch Cutting Length, 1/2-Inch Cutting Length Total Length: 1/2 Inch
Carbide Endmill for CNC Routers and Plunge Routers with 3/8" Collets by Makita, Bosch, and Other Brands
For aluminum 6061, 7075, and other alloys Non- Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp
End Mill Bits Can Be Used For Side Milling, End Milling, Finish Machining, and Other Applications.
TOP 10
Weeker SO132"O" Single Flute 1/4-Inch Solid Carbide CNC Router Bit Up Spiral Aluminum Cutting 1/4" X 3/4" X 1/4" X 2-1/2" …
2.50 x 0.20 x 0.20 inches
Our Score
Product Features
Length of Cut: Overall Length: 3/4" 1/2"
Diameter of the Shank: a quarter-inch cutting diameter a quarter-inch cutting diameter a quarter-inch 1/4"
Used For: Plastic made of aluminum
Micro- Carbide Grain
Bit O Single-CNC Router Flute Up-
TOP 11
Amana Tool 51377-Z SC Spiral O Single Flute Aluminum Cutting 1/4 D x 3/4 CH x 1/4 SHK x 2 Inch Long Up-Cut ZrN Coated Router Bit withMirror Finish
Amana Tool
Our Score
Product Features
Specifications include: Orientation: Up- Diameter of the cut (D): Cutting Height (B): 1/4 inch Shank: 3/4 (D) Shank: 3/4 (D) Shank: 3/4 (D) L: 1/4 Overall Length (L): 1/4 Overall Length (L): 1/4 Overall Length 2 Flutes: 1 Coating on the Surface: Zrn
Benefits of Zrn Coating: Creates Incredibly Precise Detail Work Optimized Flute Geometry And Low Total Indicated Runout (Tir) Guarantees Clean Cuts, Essentially Eliminates Sanding, And Reduces Chatter When Used With Low Tir Spindles Creates A Harder And Tougher Cutting Ceramic Over Carbide Edge, Allowing For A Prolonged Cutting Edge Life And Helps To Prevent The Build-Up Of Chatter Pvd Ceramic Hardcoat Designed For Soft, Gummy, And Abrasive Materials High As Pvd Ceramic Hardcoat Designed For Soft, Gummy, And Abrasive Materials High As
TOP 12
Amana Tool 51373 SC Spiral O Single Flute, Aluminum Cutting 1/8 D x 5/16 CH x 1/4 SHK x 1-1/2 Inch Long Up-Cut Router Bit
Amana Tool
51373
Our Score
Product Features
(D) 1/8" Diameter
Direction - Up
1st Overall Length (L)
(D) 1/4" Shank
(B) 5/16" Cutting Height
TOP 13
Engraving Bits, 2 Flutes Straight CNC V-bit 1/4 Inch Shank Marking Conical Engraving Router Tool for Steel Aluminum Brass MDF Wood by SILIVN
SILIVN
Our Score
Product Features
Silivn Craving Router Bits Are Made Of Tungsten Steel, Which Offers Better Cutting Strength And Premium Drilling Outcomes Than Other Ordinary Carbide Steel Craving Bits On The Market; Only Time Will Tell Which Lasts Longer.
Engraving And Lettering Just Got A Little Easier With Silivn's Engraving Cnc Router Bits. [Perfect For Manicurists Or Beginners] Put It To Work On Your 2D Or 3D Carving. Precise Details Are Possible Due To The Deep Angle And Sharp Point
[Extremely Versatile] 4 Different Sizes Cnc Engraving Bits Set To Satisfy All Your Demands: 15 Degree Detail Carving Bit For Carving Liner/20 Degree Profile Bit A Flat Cut Tip For Outlining Letters In Wood Signs,Tracing Lines And Cleaning/60 And 90 Degree V Bits Are Great For V-Cut/60 And 90 Degree V Bits Are Great For V-Cut/60 And 90 Degree V Bits Are Great For V-Cu Groove. Each Bit is packaged in its own storage case. When using the Detail Bit, please take it slowly.
[Extremely Sharp Edge Provides Smooth Cutting, No Glitches, And High Precision] Fast Engrave And Cut, Extremely Sharp Edge Provides Smooth Cutting, No Glitches, And High Precision which has the ability to engrave quickly and efficiently.
TOP 14
HQMaster CNC Router Bits, 10 Pack 1/8” Shank Spiral Upcut Router Bit 1 Flute End Mill Set Milling Cutter 2mm Cutting Single Flute Tungsten Steel Eng...
HQMaster
Our Score
Product Features
High Productivity - These bits have a sharp edge that allows them to engrave quickly, resulting in increased efficiency. Durable, precise, and difficult to break; It Is Non-Smoking And Burr-Free. While the application is being processed, you are free.
Processing Capacity – Cutting/Engraving/Carving/Drilling/Sculpturing/Milling in Mdf, Acrylic, Density Board, Solid Wood, Wood, Plastics, Pvc, Pvc Expansion Sheet, Thin Aluminum, Pp, Abs, and Other Materials
Cutting to Perfection - The Cnc Router Bit's Single Flute Design, Larger Spiral Chip Space, and Mirror Polishing Makes Non-Slip Non-Slip Non-Slip Non-Slip Non-Slip Non-Slip Non-Slip Non-Slip Non-Slip Non Sticky Crumbs, Easy Cutting, and Quick Chip- Removal
Contents of the Package - In a plastic storage case, 10 tungsten steel bits are assorted.
- Dimensions The Shank Diameter (Sd) is the measurement of the diameter of the shank. 1/8" (3. 175Mm); Diameter of the cut: 2Mm; Flute Length / Cutting Edge Length (Cel): 8Mm; Oal (Overall Length):
TOP 15
Amana Tool - HSS1633 High Speed Steel Double Flute Spiral Aluminum Cutting 1/4 Dia x
Amana Tool
HSS1633
Our Score
Product Features
The diameter (D) is the measurement of the circumference of a circle. 1/4
Orientation: Up-
Shank (D): Shank (D): Shank (D): Shan 1/4
Length (L) in total:
The cutting height (B) is the height at which the blades are cut. 5/8
TOP 16
SPEED TIGER ISEU Carbide Spiral Router Bits Up Cut, 1/4” Diameter, 1” Cutting Length, 2-1/2"OVL for Wood/Oak/MDF/Aluminum -Made
SPEED TIGER
0.24 x 2.52 x 0.24 inches
Our Score
Product Features
For Hard Materials - High Performance Micro Grain Carbide Is Used To Make The Cutter, Which Is Extremely Tough, Resists Wear, And Provides Excellent Cutting Performance.
Cutter for a Wide Range of Applications - Working with wood, aluminum, copper, MDF, carbon steels (Hb225), alloy steels (Hb225325), and pre-hardened steels (Hb225325) is a breeze with Speed Tiger Carbide Tools. Cast iron, hardened steels (up to Hrc45), and hardened steels (Hrc4045).
Up Cut, 1/4" Cutting Diameter, 1" Cutting Length, 1/4" Shank Diameter, 2" Full Length 1/2".
High- Quality - In a world where everything is connected, flutes have a firm footing. Iso- class Factory certified to ISO 9001; At A Reasonable Price, You Can Get A Great Performance.
Support that is focused – Viadedicated Support from the Seller - Contact Seller Anytime For Cutting Condition Data, To Get The Best Performance From Your Speed Tiger Cutters Contact Seller Anytime For Cutting Condition Data, To Get The Best Performance From Your Speed Tiger Cutters Contact Seller Via Amazon Anytime For Cutting Condition Data, To Get The Best Performance From Your Speed Tiger Cutters
TOP 17
Amana Tool HSS1646 HSS Spiral Aluminum Cutting Double Flute Up-Cut 3/4 D x 1-1/4 CH x 1/2 SHK 3-1/4 Inch Long Router Bit
Amana Tool
Our Score
Product Features
Specifications include: Orientation: Up- Diameter of the cut (D): Cutting Height (B): 3/4 in. Shank: 1/4 (D) Shank: 1/4 (D) Shank: 1/4 (D) Overall Length (L): 1/2 Flutes of 1/4:
TOP 18
Yonico Upcut Router Bits Spiral 2 Flute Solid Carbide CNC End Mill 3/16-Inch Dia. 1/4-Inch Shank 31212-SC
Yonico
31212-SC
2.00 x 0.19 x 0.25 inches
0.07 pounds
Our Score
Product Features
Where Material Removal And Efficiency Are Required In Standard CNC Milling And Routing
Used For: Milling, dadoing, and boring are all common milling and dadoing techniques.
C3 Micro-Size Premium Tungsten Carbide Solid Grain For A High-Quality Product Industrial Quality Control Tool with High Performance
Precision precision precision precision precision precision precision precision precision precision precision precision precision precision precision precision precision precision precision precision precision precision precision precision precision precision precision precision precision precision precision precision precision precision precision precision precision precision precision
Suitable for CNC, Tabletop, and Handheld Routers
TOP 19
HQMaster CNC Router Bits, 10 Pack Router Bit Single End Mill Set Milling Cutter Tungsten Steel Engraving Carving Tool Kit
HQMaster
2.17 x 2.01 x 0.35 inches
Our Score
Product Features
High Productivity - These bits have a sharp edge that allows them to engrave quickly, resulting in increased efficiency. Durable, precise, and difficult to break; It Is Non-Smoking And Burr-Free. While the application is being processed, you are free.
Processing Capacity – Carving/Cutting/Engraving/Milling in Density Board, Wood, Acrylic, Pvc, Pvc Expansion Sheet, Plastics, Mdf, and Other Materials
Cutting to Perfection - The Flute Design, Larger Spiral Chip Space, and Mirror Polishing Of Cnc Router Bit Make Non-Slip Non-Slip Non-Slip Non-Slip Non-Slip Non-Slip Non-Slip Non-Slip Non-Slip Non- Sticky Crumbs, Easy Cutting, and Quick Chip- Removal
Contents of the Package - 10 Assorted Tungsten Steel Upcut Bits in a Storage Case
- Dimensions Diameter of the Shank: 1/8" (3. 175Mm); Length of the cutting edge/length of the flute: 12Mm; Oal (Overall Length):
Top Picks
Most Popular
Related