18 Of Best Aluminum Spiral Router Bits In 2024
TOP 1
Amana Tool - 51377 Solid Carbide CNC Spiral 'O' Single Flute, Aluminum Cutting 1/4 Dia x 3
Amana Tool
51377
Our Score
Product Features
(D) 1/4" Diameter
Direction - Up
L2 (Overall Length)
(D) 1/4" Shank
(B) 3/4" Cutting Height
TOP 2
HUHAO Spiral 60 Degree V Groove Engraving Tool Flat Bottom CNC Router Bits 1/8 Inch Shank for Aluminum MDF Hard Wood Copper 5PCS
HUHAO
Our Score
Product Features
Set of Engraving Router Bits, Spiral Flute Cutting Tool, Straight 1/8 Inch Shank V-Type V-Type V-Type V-Type V-Type V-Type V-Type V-Type V-Type V-Type V-Type V-Type V- Cnc Router Bits V Groove,Mirror Finish,Woodworking,High Precision Bit,Cutter For Aluminum Mdf Hard Wood Copper,Cnc Router Bits V Groove,Mirror Finish,Woodworking,High Precision
Material: steel made of tungsten
The sharp edge of the V Groove Router Bit allows for fast engraving, resulting in increased efficiency. Oversized Spiral And Discharge Chips Are Used In The Design Of CNC Router Bits, Increasing Productivity.
Diameter of the Shank: 175 millimeters (or 1/8 inch) Degree: Diameter of the cutting edge: 1Mm; Length in total: 36Mm
Package: In one package, there are 5 pieces of CNC router bit, as well as a storage case.
TOP 3
SpeTool 1/4 Shank Carbide End Mill for Aluminum Cut Non-Ferrous Metal Upcut CNC Spiral Router Bit
SpeTool
Our Score
Product Features
Route Bits with a Flat Top, 3-Pack Flute with an upcut for easy chip removal and a flawless finish. Machining in a clockwise direction.
1-Inch Solid Carbide Spiral Router Bit With 1/4-Inch Shank And 1/4-Inch Cutting Diameter, Solid Carbide Spiral Router Bit With 1/4-Inch Shank And 1/4-Inch Cutting Diameter, Solid Car 3-Inch Cutting Length, 1/2-Inch Cutting Length Total Length: 1/2 Inch
Carbide Endmill for CNC Routers and Plunge Routers with 1/4" Collets by Makita, Bosch, and Other Brands
For aluminum 6061, 7075, and other alloys Non- Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp Sharp
End Mill Bits Can Be Used For Side Milling, End Milling, Finish Machining, and Other Applications.
TOP 4
HQMaster CNC Router Bits, 10 Pack 1/8” Shank Spiral Upcut Router Bit 1 Flute End Mill Set Milling Cutter 2mm Cutting Single Flute Tungsten Steel Eng...
HQMaster
Our Score
Product Features
High Productivity - These bits have a sharp edge that allows them to engrave quickly, resulting in increased efficiency. Durable, precise, and difficult to break; It Is Non-Smoking And Burr-Free. While the application is being processed, you are free.
Processing Capacity – Cutting/Engraving/Carving/Drilling/Sculpturing/Milling in Mdf, Acrylic, Density Board, Solid Wood, Wood, Plastics, Pvc, Pvc Expansion Sheet, Thin Aluminum, Pp, Abs, and Other Materials
Cutting to Perfection - The Cnc Router Bit's Single Flute Design, Larger Spiral Chip Space, and Mirror Polishing Makes Non-Slip Non-Slip Non-Slip Non-Slip Non-Slip Non-Slip Non-Slip Non-Slip Non-Slip Non Sticky Crumbs, Easy Cutting, and Quick Chip- Removal
Contents of the Package - In a plastic storage case, 10 tungsten steel bits are assorted.
- Dimensions The Shank Diameter (Sd) is the measurement of the diameter of the shank. 1/8" (3. 175Mm); Diameter of the cut: 2Mm; Flute Length / Cutting Edge Length (Cel): 8Mm; Oal (Overall Length):
TOP 5
Amana Tool - HSS1645 High Speed Steel Double Flute Spiral Aluminum Cutting 1/2 Dia x
Amana Tool
HSS1645
Our Score
Product Features
The diameter (D) is the measurement of the circumference of a circle. 1/2
Orientation: Up-
Shank (D): Shank (D): Shank (D): Shan 1/2
Length (L) in total:
The cutting height (B) is the height at which the blades are cut.
TOP 6
SPEED TIGER ISEU Carbide Spiral Router Bits Up Cut, 1/8” Diameter, 1/2” Cutting Length, 2"OVL for Wood/Oak/MDF/Aluminum -Made
SPEED TIGER
0.12 x 1.97 x 0.12 inches
Our Score
Product Features
For Hard Materials - High Performance Micro Grain Carbide Is Used To Make The Cutter, Which Is Extremely Tough, Resists Wear, And Provides Excellent Cutting Performance.
Cutter for a Wide Range of Applications - Working with wood, aluminum, copper, MDF, carbon steels (Hb225), alloy steels (Hb225325), and pre-hardened steels (Hb225325) is a breeze with Speed Tiger Carbide Tools. Cast iron, hardened steels (up to Hrc45), and hardened steels (Hrc4045).
Cutting Diameter 1/8", Cutting Length 1/2", Shank Diameter 1/8", Full Length 2" Up Cut, Cutting Diameter 1/8", Cutting Length 1/2", Shank Diameter 1/8", Full Length 2"
High- Quality - In a world where everything is connected, flutes have a firm footing. Iso- class Factory certified to ISO 9001; At A Reasonable Price, You Can Get A Great Performance.
Support that is focused – Viadedicated Support from the Seller - Contact Seller Anytime For Cutting Condition Data, To Get The Best Performance From Your Speed Tiger Cutters Contact Seller Anytime For Cutting Condition Data, To Get The Best Performance From Your Speed Tiger Cutters Contact Seller Via Amazon Anytime For Cutting Condition Data, To Get The Best Performance From Your Speed Tiger Cutters
TOP 7
HQMaster 10-Pack End Mill Milling Cutter 1.5mm Cutting Dia. Spiral Router Bits CNC Bits 1-Flute Single Edged Cutting Engraving Bits Tungsten Steel 6mm...
HQMaster
HQ-5367
2.17 x 2.01 x 0.35 inches
Our Score
Product Features
The cutting edge diameter (Ced) is a measurement of the distance between the cutting edge and the cutting edge.
Flutes Counted: The Shank Diameter (Sd) is the measurement of the diameter of the shank. 1/8"(3. 175 millimeters (175 millimeters = 175 millimeters = 175 mill
Total Length: Overall Length: Total Length: Overall Length: Total Length: Overall Length
Material: Tungsten Steel is a type of steel that is used in the manufacturing of Quantity: Pack of ten (includes storage case)
Length of the cutting edge (Cel)/ Length: 6Mm
TOP 8
Amana Tool 51373-Z SC Spiral O Single Flute Aluminum Cutting 1/8 D x 5/16 CH x 1/4 SHK x 1-1/2 Inch Long Up-Cut ZrN Coated Router Bit
Amana Tool
Our Score
Product Features
Specifications include: Orientation: Up- Diameter of the cut (D): Cutting Height: 1/8 (B) Shank: 5/16 (D) Shank: 5/16 (D) Shank: 5/16 (D L: 1/4 Overall Length (L): 1/4 Overall Length (L): 1/4 Overall Length Flutes (1/2) 1 Coating on the Surface: Zrn
Benefits of Zrn Coating: Creates Incredibly Precise Detail Work Optimized Flute Geometry And Low Total Indicated Runout (Tir) Guarantees Clean Cuts, Essentially Eliminates Sanding, And Reduces Chatter When Used With Low Tir Spindles Creates A Harder And Tougher Cutting Ceramic Over Carbide Edge, Allowing For A Prolonged Cutting Edge Life And Helps To Prevent The Build-Up Of Chatter Pvd Ceramic Hardcoat Designed For Soft, Gummy, And Abrasive Materials High As Pvd Ceramic Hardcoat Designed For Soft, Gummy, And Abrasive Materials High As
TOP 9
HQMaster CNC Router Bits 1/8 Router Bit 1 8 End Mill Spiral Upcut Titanium Coated 2 Flute Milling Cutter Cutting Tool Set Tungsten Steel 17mm CEL
HQMaster
2.17 x 2.01 x 0.35 inches
Our Score
Product Features
High Productivity - These bits have a sharp edge that allows them to engrave quickly, resulting in increased efficiency. Durable, precise, and difficult to break; It Is Non-Smoking And Burr-Free. While the application is being processed, you are free.
Processing Capacity – Carving/Cutting/Engraving/Milling/Slotting/Sculpturing In Mdf, Acrylic, Solid Wood, Hardwood, Chipboard, Abs, Pvc, Density Board, Plastics, Rose Wood, and Other Materials
Cutting to Perfection - The Cnc Router Bit's Mirror Polishing, Larger Spiral Chip Space, and 2 Flutes Make It Non-Slip. Sticky Crumbs, Easy Cutting, and Quick Chip- Removal
Contents of the Package - 10 Assorted Tungsten Steel Upcut Bits (Titanium Coated) in a Storage Case
- Dimensions The Shank Diameter (Sd) is the measurement of the diameter of the shank. 1/8" (3. 175Mm); The cutting edge diameter (Ced) is a measurement of the distance between the cutting edge and the cutting edge. 1/8" (3. 175Mm); Flute Length / Cutting Edge Length (Cel): 17Mm; Oal (Overall Length):
TOP 10
Amana Tool 51502-Z SC Spiral O Single Flute Aluminum Cutting 1/4 D x 5/8 CH x 1/4 SHK x 2 Inch Long Down-Cut ZrN Coated Router Bit
Amana Tool
Our Score
Product Features
Specifications include: Orientation: Down- Diameter of the cut (D): Cutting Height (B): 1/4 inch Shank: 5/8 (D) Shank: 5/8 (D) Shank: 5/8 (D L: 1/4 Overall Length (L): 1/4 Overall Length (L): 1/4 Overall Length 2 Flutes:
Benefits of Zrn Coating: Creates Incredibly Precise Detail Work Optimized Flute Geometry And Low Total Indicated Runout (Tir) Guarantees Clean Cuts, Essentially Eliminates Sanding, And Reduces Chatter When Used With Low Tir Spindles Creates A Harder And Tougher Cutting Ceramic Over Carbide Edge, Allowing For A Prolonged Cutting Edge Life And Helps To Prevent The Build-Up Of Chatter Pvd Ceramic Hardcoat Designed For Soft, Gummy, And Abrasive Materials High As Pvd Ceramic Hardcoat Designed For Soft, Gummy, And Abrasive Materials High As
TOP 11
SainSmart Genmitsu 10Pcs Nano Blue Coat End Mill CNC Router Bits
Genmitsu
Our Score
Product Features
The benefit is that With enough flexural strength and wear resistance to ensure high productivity. Sharp Cutting Edge, Milling, Hole And Plate Edge, Neat Surface, No Glitches
Diameter of the cutting edge: 0Mm (0. 8/1. 0/1. 2/1. 4/1. 6/1. 8/2. 0/2. 2/2. 4/3. 0Mm), 10 pieces
Material: Using Ultra-violet Light Carbide material with a fine grain that is good for milling and cutting.
Genmitsu Cnc Bits Selection Guide: To Learn More About How To Choose The Right Bits To Meet Your Needs, Go To The Product Guides And Documents Section Below And Look For The Comparison Chart (Cnc Bits Buying Guide).
In this case, Processing of PCBs, SMTs, CNCs, Molds, Plastic Fiber, Carbon Fiber, Hard Wood, Printed Circuit Boards, and Other Precision Parts
TOP 12
Amana Tool HSS1643 HSS Spiral Aluminum Cutting Double Flute Up-Cut 3/8 D x 1-1/4 CH x 1/2 SHK 3-3/4 Inch Long Router Bit
Amana Tool
Our Score
Product Features
Specifications include: Orientation: Up- Diameter of the cut (D): 3/8 (B) Cutting Height: 3/8 (B) Cutting Height: 3/8 (B) Cutting Height Shank: 1/4 (D) Shank: 1/4 (D) Shank: 1/4 (D) Overall Length (L): 1/2 Flutes for 3/4:
TOP 13
Amana Tool 51480-Z SC Spiral O Single Flute Aluminum Cutting 1/4 D x 3/4 CH x 1/4 SHK x 2-1/2 Inch Long Up-Cut ZrN Coated Router Bit
Amana Tool
Our Score
Product Features
Specifications include: Orientation: Up- Diameter of the cut (D): Cutting Height (B): 1/4 inch Shank: 3/4 (D) Shank: 3/4 (D) Shank: 3/4 (D) L: 1/4 Overall Length (L): 1/4 Overall Length (L): 1/4 Overall Length Flutes (1/2) 1 Coating on the Surface: Zrn
Benefits of Zrn Coating: Creates Incredibly Precise Detail Work Optimized Flute Geometry And Low Total Indicated Runout (Tir) Guarantees Clean Cuts, Essentially Eliminates Sanding, And Reduces Chatter When Used With Low Tir Spindles Creates A Harder And Tougher Cutting Ceramic Over Carbide Edge, Allowing For A Prolonged Cutting Edge Life And Helps To Prevent The Build-Up Of Chatter Pvd Ceramic Hardcoat Designed For Soft, Gummy, And Abrasive Materials High As Pvd Ceramic Hardcoat Designed For Soft, Gummy, And Abrasive Materials High As
TOP 14
HQMaster 1/8 Shank CNC Router Bits Inch Shank 3.175mm End Mill Single Flute Spiral Router Bit Milling Cutter Upcut Cutting Engraving Single Edged Acry...
HQMaster
HQ-822
2.17 x 2.17 x 0.35 inches
0.11 pounds
Our Score
Product Features
High Productivity - These bits have a sharp edge that allows them to engrave quickly, resulting in increased efficiency.
Wide Range of Use - Carving, Cutting, Engraving, and Milling in Density Board, Wood, Acrylic, Plastic, Pcb, Pvc, Pp, Mdf, Nylon, Resin, Plywood, Hardwood, and Other Materials
Cutting to Perfection - The Cnc Router Bit's single-flute design and larger spiral chip space make it non-reversible. Sticky Crumbs, Easy Cutting, and Quick Chip- Removal
Contents of the Package - In a plastic storage case, 10 tungsten carbide bits are assorted.
- Dimensions 1/8" (3.25 mm) Shank 175Mm). 1/8" (3.0 mm) Cutting Edge Diameter Cutting Edge Length: 175mm, 175mm, 175mm, 175mm, 175mm, 175mm 17Mm; Total Length:
TOP 15
HQMaster 10 Pack 6mmEnd Mill Milling Cutter CNC Spiral Router Bits Tungsten Steel 22mm Flute Length
HQMaster
Our Score
Product Features
Diameter of the Shank: 6Mm; Total Length: Overall Length: Total Length: Overall Length: Total Length: Overall Length 45Mm
Processing Capacity – Carving/Cutting/Engraving/Milling/Drilling/Roughing/Sculpturing in Mdf, Acrylic, Aluminum, Wood, Composite Board, Plastics, Double Color Plate, Abs, Pvc, Organic Board, Solid Wood, Pvc Expansion Sheet, and other materials.
Quantity: Pack of ten (includes storage case)
Material: Tungsten Steel is a type of tungsten steel.
Length of the cutting edge / Flutes: 22Mm
TOP 16
Amana Tool 51373 SC Spiral O Single Flute, Aluminum Cutting 1/8 D x 5/16 CH x 1/4 SHK x 1-1/2 Inch Long Up-Cut Router Bit
Amana Tool
51373
Our Score
Product Features
(D) 1/8" Diameter
Direction - Up
1st Overall Length (L)
(D) 1/4" Shank
(B) 5/16" Cutting Height
TOP 17
Amana Tool 51454-Z SC Spiral O Single Flute ZrN Coated Aluminum Cutting 1/8 D x 1/2 CH x 1/4 SHK x 2 Inch Long Up-Cut Router Bit
Amana Tool
Our Score
Product Features
Specifications include: Orientation: Up- Diameter of the cut (D): Cutting Height: 1/8 (B) Shank: 1/2 (D) L: 1/4 Overall Length (L): 1/4 Overall Length (L): 1/4 Overall Length 2 Flutes: 1 Coating on the Surface: Zrn
Benefits of Zrn Coating: Creates Incredibly Precise Detail Work Optimized Flute Geometry And Low Total Indicated Runout (Tir) Guarantees Clean Cuts, Essentially Eliminates Sanding, And Reduces Chatter When Used With Low Tir Spindles Creates A Harder And Tougher Cutting Ceramic Over Carbide Edge, Allowing For A Prolonged Cutting Edge Life And Helps To Prevent The Build-Up Of Chatter Pvd Ceramic Hardcoat Designed For Soft, Gummy, And Abrasive Materials High As Pvd Ceramic Hardcoat Designed For Soft, Gummy, And Abrasive Materials High As
TOP 18
HQMaster CNC Router Bits, 10 Pack Router Bit Single End Mill Set Milling Cutter Tungsten Steel Engraving Carving Tool Kit
HQMaster
2.17 x 2.01 x 0.35 inches
Our Score
Product Features
High Productivity - These bits have a sharp edge that allows them to engrave quickly, resulting in increased efficiency. Durable, precise, and difficult to break; It Is Non-Smoking And Burr-Free. While the application is being processed, you are free.
Processing Capacity – Carving/Cutting/Engraving/Milling in Density Board, Wood, Acrylic, Pvc, Pvc Expansion Sheet, Plastics, Mdf, and Other Materials
Cutting to Perfection - The Flute Design, Larger Spiral Chip Space, and Mirror Polishing Of Cnc Router Bit Make Non-Slip Non-Slip Non-Slip Non-Slip Non-Slip Non-Slip Non-Slip Non-Slip Non-Slip Non- Sticky Crumbs, Easy Cutting, and Quick Chip- Removal
Contents of the Package - 10 Assorted Tungsten Steel Upcut Bits in a Storage Case
- Dimensions Diameter of the Shank: 1/8" (3. 175Mm); Length of the cutting edge/length of the flute: 12Mm; Oal (Overall Length):