25 Of Best Acetal Threaded Tube Fittings In 2024
TOP 1
John Guest Acetal Copolymer Tube Fitting
John Guest
PI011624S
Our Score
Product Features
Push- On one end, the Connect Fitting connects to pipes or tubing, and on the other, it has an Nptf male connector.
A Straight Adapter is a device that connects pipes or fittings of various types in a straight line.
Working pressures of up to 150 psi are possible.
For Quality Assurance, it complies with NSF/ANSI Standards 14, 51, and 61.
For low moisture absorption and high tensile and flexural strength, this product is made of Acetal Copolymer Plastic.
TOP 2
John Guest Acetal Copolymer Tube Fitting
John Guest
PI4512F6S
Our Score
Product Features
Push- On one end, the Connect Fitting connects to pipes or tubing, and on the other, it connects to a Flared Female Npt Connector.
Adapter for joining different types of pipes or fittings
Working pressures of up to 150 psi are possible.
For Quality Assurance, it complies with NSF/ANSI Standards 14, 51, and 61.
For low moisture absorption and high tensile and flexural strength, this product is made of Acetal Copolymer Plastic.
TOP 3
John Guest Acetal Copolymer Tube Fitting
John Guest
PI0416S
0.03 pounds
Our Score
Product Features
Tube fittings made of nylon and polyurethane are accepted.
Union Straight Connectors are easier to connect and disconnect than couplings when connecting and disconnecting two inline pipes.
Working pressures of up to 150 psi are possible.
For Quality Assurance, it complies with NSF/ANSI Standards 14, 51, and 61.
For low moisture absorption and high tensile and flexural strength, this product is made of Acetal Copolymer Plastic.
TOP 4
John Guest Acetal Copolymer Tube Fitting
John Guest
PI061008S
4.50 x 2.70 x 0.50 inches
0.05 pounds
Our Score
Product Features
Both ends of the fitting are attached to the tubing.
A Reducing Coupler is used to connect two tubes of different diameters.
Soft metals, plastic tubes, air, or inert gases are all acceptable materials.
For Quality Assurance, it complies with NSF Standards 14, 51, and 61.
Acetal copolymer plastic has a low moisture absorption rate and a high tensile and flexural strength.
TOP 5
John Guest Acetal Copolymer Tube Fitting
John Guest
PI201210S
Our Score
Product Features
Tube fittings made of nylon and polyurethane are accepted.
Straight Union Reduction for Easier Connection and Disconnection of Two Inline Pipes of Different Diameters Than Couplings
Working pressures of up to 150 psi are possible.
For Quality Assurance, it complies with NSF/ANSI Standards 14, 51, and 61.
For low moisture absorption and high tensile and flexural strength, this product is made of Acetal Copolymer Plastic.
TOP 6
John Guest Acetal Copolymer Tube Fitting
John Guest
PI0316S
5.60 x 4.60 x 1.00 inches
0.20 pounds
Our Score
Product Features
Tube fittings made of nylon and polyurethane are accepted.
The Union Elbow is used to join two tubes at an angle.
Working pressures of up to 150 psi are possible.
For Quality Assurance, it complies with NSF/ANSI Standards 14, 51, and 61.
For low moisture absorption and high tensile and flexural strength, this product is made of Acetal Copolymer Plastic.
TOP 7
John Guest Acetal Copolymer Tube Fitting
John Guest
PI481223S
1.31 x 1.25 x 0.75 inches
0.02 pounds
Our Score
Product Features
Push- On one end, the Connect Fitting connects to pipes or tubing, and on the other, it has an Nptf male connector.
For connecting two pipes or fittings at an angle, use a rigid elbow.
Working pressures of up to 150 psi are possible.
For Quality Assurance, it complies with NSF/ANSI Standards 14, 51, and 61.
For low moisture absorption and high tensile and flexural strength, this product is made of Acetal Copolymer Plastic.
TOP 8
John Guest Acetal Copolymer Tube Fitting
John Guest
PI1208S
5.80 x 3.00 x 0.60 inches
0.10 pounds
Our Score
Product Features
Tube fittings made of nylon and polyurethane are accepted.
In a main/branch configuration, a reducing branch te is used to connect three pipes or fittings with different diameters.
Working pressures of up to 150 psi are possible.
For Quality Assurance, it complies with NSF/ANSI Standards 14, 51, and 61.
For low moisture absorption and high tensile and flexural strength, this product is made of Acetal Copolymer Plastic.
TOP 9
John Guest Acetal Copolymer Barbed Tube Fitting
John Guest
PI250806S
5.00 x 2.50 x 0.40 inches
0.05 pounds
Our Score
Product Features
To connect pipes or tubes with different ends, a stem fitting is inserted into the tubing.
Connecting Pipes Or Tubes In A Straight Line With A Stem Fitting
Working pressures of up to 150 psi are possible.
For Quality Assurance, it complies with NSF/ANSI Standards 14, 51, and 61.
For low moisture absorption and high tensile and flexural strength, this product is made of Acetal Copolymer Plastic.
TOP 10
John Guest Acetal Copolymer Tube Fitting
John Guest
PI0216S
2.50 x 1.50 x 1.00 inches
0.06 pounds
Our Score
Product Features
Tube fittings made of nylon and polyurethane are accepted.
All three ends of the union tee have female connections.
Working pressures of up to 150 psi are possible.
For Quality Assurance, it complies with NSF/ANSI Standards 14, 51, and 61.
For low moisture absorption and high tensile and flexural strength, this product is made of Acetal Copolymer Plastic.
TOP 11
John Guest Acetal Copolymer Tube Fitting
John Guest
PI451213S
4.60 x 3.90 x 0.90 inches
0.25 pounds
Our Score
Product Features
Push- On one end, the Connect Fitting connects to pipes or tubing, and on the other, it has a Bsp female connector.
Flat- End Adapters join two different types of pipes to extend a run of piping.
Working pressures of up to 150 psi are possible.
For Quality Assurance, it complies with NSF/ANSI Standards 14, 51, and 61.
For low moisture absorption and high tensile and flexural strength, this product is made of Acetal Copolymer Plastic.
TOP 12
Colder PLCD17005 Acetal Tube Fitting
Colder Products Company
Our Score
Product Features
For connecting two pipes or tubes with different ends, there is a coupler on one end and a barbed construction on the other.
In A Straight Run, A Coupler Is Used To Connect Pipes Or Tubing
Working pressures of up to 120 psi are possible.
The operating temperature ranges from - to +100°F. Temperatures range from 40 to 180 degrees Fahrenheit.
Acetal copolymer plastic has a low moisture absorption rate and a high tensile and flexural strength.
TOP 13
Colder PLCD10004 Acetal Tube Fitting
Colder Products Company
0.10 pounds
Our Score
Product Features
On one end, the coupler connects to tubing, and on the other, it connects to an Npt male connector.
A degree coupler is used to connect two fittings that are at an angle.
Working pressures of up to 120 psi are possible.
The operating temperature ranges from - to +100°F. Temperatures range from 40 to 180 degrees Fahrenheit.
Acetal copolymer plastic has a low moisture absorption rate and a high tensile and flexural strength.
TOP 14
Colder PMCD1604 Acetal Tube Fitting
Colder Products Company
0.04 pounds
Our Score
Product Features
On one end, the fitting connects to tubing, while the other has a colder Pmc Series 1/8 Flow Female Coupling.
Panel Mount Coupling is attached to a wall or panel and allows tubing to be connected to the coupling through a barrier.
Fluid Spills Can Be Prevented With The Use Of A Shutoff Valve
On flexible and semi-rigid materials, a barbed fitting creates a tight seal. When paired with a hose clamp, crimp sleeve, or ferrule (all sold separately), rigid tubing becomes even more rigid.
Acetal copolymer plastic has a low moisture absorption rate, a high tensile and flexural strength, and a high fatigue resistance.
TOP 15
John Guest Acetal Copolymer Tube Fitting
John Guest
PI011203S
Our Score
Product Features
Push- The Connect Fitting has a Bspt Male Connector on one end and connects to pipes or tubing on the other.
A Straight Adapter is a device that connects pipes or fittings of various types in a straight line.
Working pressures of up to 150 psi are possible.
For Quality Assurance, it complies with NSF/ANSI Standards 14, 51, and 61.
For low moisture absorption and high tensile and flexural strength, this product is made of Acetal Copolymer Plastic.
TOP 16
Colder PLCD42004 Acetal Tube Fitting
Colder Products Company
PLCD42004
0.02 pounds
Our Score
Product Features
On one end, there is a barbed connection and on the other, there is a push-button connection On the other hand, in order to connect two tubes, there is an in connection on the other side.
Connecting Two Tubes Through A Panel With A Valved Bulkhead Fitting
Vacuum pressure ranges from 0 to 120 psi (8.3 bar). 3 Bar)
Temperature Range of Operation - 40°F to 180°F (-40°C to 180°C) Temperatures range from 40 to 82 degrees Celsius.
Acetal Plastic Body For Strength And Resistance To Solvents And Chemicals, With A Buna-N Buna-N Buna-N Buna-N Buna-N Buna-N Buna-N Buna- N Seal For Weathering And Abrasion Resistance
TOP 17
John Guest Acetal Copolymer Tube Fitting
John Guest
PI051623S
Our Score
Product Features
Two pipes or tubes with different ends are connected by a stem on one end and a Nptf male on the other.
A stem adapter is a device that connects pipes or fittings of various types in a straight line.
Working pressures of up to 150 psi are possible.
For Quality Assurance, it complies with NSF/ANSI Standards 14, 51, and 61.
For low moisture absorption and high tensile and flexural strength, this product is made of Acetal Copolymer Plastic.
TOP 18
Colder PMCD2204 Acetal Tube Fitting
Colder Products Company
PMCD22-04
Our Score
Product Features
For connecting two pipes or tubes with different ends, there is a coupler on one end and a barbed construction on the other.
For connecting two pipes in a straight line, use an insert coupler.
Working pressures of up to 120 psi are possible.
The operating temperature ranges from - to +100°F. Temperatures range from 40 to 180 degrees Fahrenheit.
For low moisture absorption and high tensile and flexural strength, this product is made of Acetal Copolymer Plastic.
TOP 19
Parker Hannifin A8MC8-MG TrueSeal Acetal Male Connector Fitting
Parker Hannifin
A8MC8-MG
Our Score
Product Features
O-rings that have been designed On the tube, the ring increases the seal compression.
Gripping Teeth are made of stainless steel or have a thermoplastic bite edge.
Release of the Push Button
Compliant with FDA standards
NSF-certified fittings are used throughout the building. 51 Listed
TOP 20
Colder PLCD24004 Acetal Tube Fitting
Colder Products Company
PLCD24004
0.01 pounds
Our Score
Product Features
For connecting two tubes with different ends, there is a tube insert connection on one end and male Npt threads on the other.
In-line Valve For connecting tubes in a straight line, use a line coupling.
Vacuum pressure ranges from 0 to 120 psi (8.3 bar). 3 Bar)
Temperature Range of Operation - 40°F to 180°F (-40°C to 180°C) Temperatures range from 40 to 82 degrees Celsius.
Acetal Plastic Body For Strength And Resistance To Solvents And Chemicals, With A Buna-N Buna-N Buna-N Buna-N Buna-N Buna-N Buna-N Buna- N Seal For Weathering And Abrasion Resistance
TOP 21
John Guest Acetal Copolymer Tube Fitting
John Guest
PI2308S
Our Score
Product Features
Tube fittings made of nylon and polyurethane are accepted.
Two- Three-way divider with three openings to connect and branch three pipes
Working pressures of up to 150 psi are possible.
For Quality Assurance, it complies with NSF/ANSI Standards 14, 51, and 61.
For low moisture absorption and high tensile and flexural strength, this product is made of Acetal Copolymer Plastic.
TOP 22
John Guest Acetal Copolymer Tube Fitting
John Guest
PI491612S
Our Score
Product Features
Without the use of any tools, you can disconnect quickly.
Push- Technology that is appropriate
Flow Characteristics That Are Superior
Suitable for tubes made of soft metal or plastic; Air or inert gases can be used.
Suitable For Potable Liquids And Of Good Food Quality
TOP 23
John Guest Acetal Copolymer Tube Fitting
John Guest
PI121208S
4.00 x 3.00 x 1.30 inches
0.50 pounds
Our Score
Product Features
Without the use of any tools, you can disconnect quickly.
Push- Technology that is appropriate
Flow Characteristics That Are Superior
Soft metal, plastic tubes, air, or inert gases are all acceptable materials.
Suitable For Potable Liquids And Of Good Food Quality
TOP 24
Parker Hannifin A6MC4-MG-pk10 True Seal Male Connector Fitting with EPDM Seal
Parker Hannifin
A6MC4-MG-pk10
Our Score
Product Features
O-rings that have been designed On the tube, the ring increases the seal compression.
Gripping Teeth are made of stainless steel or have a thermoplastic bite edge.
Release of the Push Button
Compliant with FDA standards
NSF-certified fittings are used throughout the building. 51 Listed
TOP 25
John Guest Style Quick/Fast Speedfit 1/4" x 1/4" inch for Reverse Osmosis RO JG Acetal Copolymer Push-To-Connect Tube Fitting
Ready4Sale
Our Score
Product Features
Polypropylene is used to make the valve's body.
Union Quick Connect 1/4" X 1/4" (Model Pp0408W) or 3/8" X 3/8" (Model Pp0412W) by John Guest.
The teeth are made of stainless steel and the collet is made of polypropylene.
Epdm is the manufacturer of the rings.
Acetal Copolymer is used to make the handle.