10 0 0 1 Captive Portal

The default LAN IP range for that router is 192.168.1.0/24. try http://192.168.1.1. If that doesn't work, you will need to determine your default

Apr 12, 2019 - 10.0.0.1 is Xfinity router IP which comes under private Class A IP address range, decided by the IETF and IANA. 10.0.0.1 is the default gateway

10.0.0.1 is a class A IP address which is reserved for private network, we can usually see this IPV4 address used by router factories as their routers' default

Hello luminous and welcome,. You should be able to login via a browser using 10.1.10.1 and username=cusadmin, password=highspeed.

10.0.0.1. Router factories use 10.0.0.1 as a class A IP address for the default gateway of their routers. In its local area network, this address must be unique.

Apr 3, 2019 - The IP address 10.0.0.1 is commonly used by business computer network routers as a gateway address that other devices on the local network

10.0.0.1 login Internet Protocol address is used in several wireless routers default IP addresses. Perhaps the most widespread wireless router using this Internet

10.0.0.1 router login and password for your device at 10.0.0.1. We will help you get into your router or other devices on your network. 10.0.0.1 is a private ip

The 10.0.0.0.1 IP address is incorrect, it's supposed to be 10.0.0.1. People get the two IP addresses mixed up because they look similar and people also don't

I got sent back to a new setup page (10.0.0.1/captive_portal.php), and I Yes some modems now have that captive portal page that makes you

I've been trying to log in to 10.0.0.1 to Port Forward for Steam, since my downloads aren't actually downloading half of the time, and 3 or 4 days

You use the wireless router and the panel management address, 10.0.0.1 is the codeThe software and applications which installed by firms are helping users

Mar 5, 2018 - Click on settings, then WiFi Network and Password. Edit the existing password. The better way. Visit 10.0.0.1 in your browser. This will take you

Feb 7, 2018 - If I manually go to the IP http://10.0.0.1:8000 and use the login option there, it will then allow internet access no problem (so it does work).

Feb 28, 2013 - What software would give me a captive portal on the Pi? rule will direct all http traffic to the Pi - assuming your Pi's IP address is 10.0.0.1

10.0.0.1 Login Router Admin IP Address, default admin username, password router list and how to login using 10.0.0.1 IP Address.

The ZS box is 10.0.0.1, so the Gatway, and DNS for my network is also 10.0.0.1 and DHCP does appear to by setting these all OK to the clients

Feb 2, 2016 - Hi everybody I have the following configuration wan ( 200.xx.xx.xx ) < -> pfsense ( lan 10.0.0.1 ) < -> router ( 192.168.1.x ) Obviously the captive

Mar 18, 2011 - Thread: Setting the URL for the captive portal login page. Can they reach the administration interface on 10.0.0.1? Attention: Support and