13 Of Best Automotive Replacement Spindles In 2024

Package Dimensions of the Item: 478 cm long x 8 cm wide x 478 cm long x 8 cm wide x 4 W x2 = 636 cm 032 Cm H

Type of product: auto Part

Weight of the Item Package: 361 Kg

Use a torque wrench, ratchet, or breaker bar to tighten the bolt.

"Most 4WD SUVs And Light Truck Axle Locknut Applications Use 6 Chrome Vanadium Steel 1/2" Drive Sockets"

The Large 4WD Spindle Puller 3910D (shown third from left) is part of the set but is no longer available separately.

For storage and organization, a blow mold case is included.

3937 - 4-Lug Socket For Taking Out And Putting In 4-Lug Socket For Taking Out And Putting In 4-Lu On 1993-, slot front axle locknuts were installed. Manual Hubs on Newer Ford Ranger, Bronco II, and Explorer Models; 1995- Newer F- 1/2 of a series , 3/4- , And 1- Trucks up to a ton and full-size trailers are available. Broncos of various sizes with manual hubs; 1959- 85 F- 1/2 of a series And 3/4- Trucks up to a ton and full-size trailers are available. Bronco in size 1960- 90 g 1/2 oz Trucks up to a ton and full-size trailers are available. Size Jimmy/Blazer; 1969- 72 1/2-International Trucks of a certain weight; 1969- Dodge 1/2-ton 89 Trucks with manual hubs that weigh more than a ton

3911D - Toyota 4- Socket for lug locknuts; High-quality services Torque Locknuts on Toyota 4WD Vehicles with Free-Floating Torque Hubs (Lock Out) for Wheels: 1995- Tacoma is a relatively new vehicle. 1996- T100 and 4Runner models from the last few years; Not for 2-person households Vehicles with four wheels

3195 - Ford 4- Socket for high-density lug nuts On 1985-, Shear Rotating Nuts Newer F- F- and 250 Ford Super Duty Trucks have Dana 80 rear axles and 350 truck rear axles.

2770D - 4-Lug Socket For Taking Out And Putting In 4-Lug Socket For Taking Out And Putting In 4-Lu Locknuts for the front axle in the slot On 1978- 1984 Ford F-150 Series 4WD Heavy-Duty-Duty-Duty-Dut Duty 3/4- And 1- Trucks of a certain weight; 1973- 3/4-81 Gm 4WD 81 Gm 4WD 81 Gm 4WD 81 Gm 4WD And 1- Trucks with a Ton Capacity

2467 - 4-Lug Socket For Taking Out And Putting In 4-Lug Socket For Taking Out And Putting In 4-Lu Front Axle Locknuts with Slots From 1986 to Newer F- 1/2 of a series Trucks with a tonnage of more than one ton, as well as full 1984- Size Bronco with Dana 44 Axle Dodge Trucks, as well as 92 Ford Ranger and Bronco II models with manual hubs

1 Year Limited Warranty

Engineered for maximum efficiency

For specific differential applications, high-quality parts are available.

Depending on the application, Belltech Drop Spindles come with a 2 or 3 inch drop.

By relocating the mounting point for the wheel A. Our Engineers Were Able To Provide A 2-Inch Spindle Pin Higher On The Spindle Casting Because Our Engineers Were Able To Provide A 2-Inch Spindle Pin Higher On The Spindle Casting Because Our Engineers Without affecting any other suspension or steering geometry, not even the shock absorber, a 3" drop is achieved.

While Maintaining Factory Ride Quality And Improving Handling Belltech Spindles maintain critical suspension geometry while removing excessive ball joint, shock, and tire wear that is common with other lowering methods.

Original Equipment Manufacturer (OEM) Ride Quality With Improved Control, Performance, And Comfort

The height of the package is 22 inches. 2 millimeters

The total length of the package is 21 inches. a height of 4 cm

The dimensions of the package are 21 inches wide by 21 inches long. a height of 6 cm

1982- Jimmy is a 2004 Chevy S10 Blazer and a GMC S15 Sonoma. The complete vehicle list can be found below.

Notes: These Spindles Are Only For 2WD! They Aren't Compatible With 4WD Models 2. To have clearance between the rim/tire and tie rod ends, vehicles with 8" wide wheels will require the use of a small wheel spacer.

Premium Quality, 1-to-1 Fit, Premium Quality, 1-to-1 Fit, Premium Quality, Premium Quality Delivery in 3 Days

Improve your performance. Simple to set up. High Reliability is a term used to describe a product's ability to

To be used with the Warn Hub Sets

Parts for Service Replacement

For Select Chevrolet/GMC, Ford, and Mazda Vehicles

For specific differential applications, high-quality parts are available.

Depending on the application, Belltech Drop Spindles come with a 2 or 3 inch drop.

By relocating the mounting point for the wheel A. Our Engineers Were Able To Provide A 2-Inch Spindle Pin Higher On The Spindle Casting Because Our Engineers Were Able To Provide A 2-Inch Spindle Pin Higher On The Spindle Casting Because Our Engineers Without affecting any other suspension or steering geometry, not even the shock absorber, a 3" drop is achieved.

While Maintaining Factory Ride Quality And Improving Handling Belltech Spindles maintain critical suspension geometry while removing excessive ball joint, shock, and tire wear that is common with other lowering methods.

Original Equipment Manufacturer (OEM) Ride Quality With Improved Control, Performance, And Comfort

Dimensions of the package 494 H X 13 W X 494 H X 13 W X 4 The dimensions are 97 L X 14 W. (Centimetres) 224 W

Weight of the package 678 ounces

Fit Type: Specific to the vehicle

Replaces Original Equipment Manufacturer (OEM) Numbers: Deere & Company, Inc.: Tca17517, Tca20639, and Tca24880 are all TCA17517, Tca20639, and Tca24880.

Specs: Detailed description: Height of the Spindle Assembly: 6 5/8"

Professional Dealers Rely On Stens Branded Parts To Complete OEM-Quality Repairs. All genuine Stens product packaging bears the Stens brand name.

We're confident that our products will work flawlessly, but in the unlikely event that they don't, we'll replace them at any time within one year of your order.

a perfect fit

Oe Style

Weight of the package 5 Pounds

1 Wheel Service Kit

Fits Dexter 9K (after 10/89) and 10K General Duty, 1-year warranty. 1/2"- 12 Unf

(1) 005-005-005-005-005-005 070- (1) 005- Tongue Washer, 005- Tongue Washer, 005- Tongue Washer, 005 071- (2) 006- Tang Washers, 00 Tang Washer, 00 Tang Washer, 00 Tang Washer, 00 096- 00 Spindle Nut is a nut that is used to secure the spindle