18 Of Best Automatic Boat Bilge Pumps In 2024

TOP 1

MAXZONE Automatic Submersible Boat Bilge Water Pump 12v 1100gph Auto

MAXZONE
1.21 pounds

Our Score

4.9

Product Features

M (Wire Lead): 1M; Dimensions of the outlet 29Mm/ 1. 14 Inch (1-foot) 1/8"); Width: Approx. 81Mm
Flow rate in gallons per minute (gph): 1100Gph; 12V; 12V; 12V; 12V; 12V; 12V; 12 (A) Currently: Head(M):
Until the internal float switch activates the pump (when the water level rises), there is no power consumption.
For easy, fully automatic operation, a built-in electronic controlled Reed Sensor System is included.
There's a float switch built in! (There is no need for a separate float switch.)
TOP 2

Ogrmar Automatic Boat Bilge Pump Float Switch Moisture Tight Seals 12/24/32VDC Ignition Protected Mercury

Ogrmar
2.36 x 1.18 x 0.79 inches
0.22 pounds

Our Score

4.85

Product Features

The switch can be easily removed from the base for cleaning.
12 Volts Max Amps: 20A; 24 Volts Max Amps: 10A; 32 Volts Max Amps: 8A. Length of Wire: 1M; 18 Awg is the wire gauge size.
When the water level reaches 2 inches (51 millimeters), turn on the pump. When the water level drops to zero, turn off the pump. 7 (19Mm).
Long-lasting, with a frequency switching frequency of up to 10 million times; Ultrasonic Welding Forms A Seal That Is Reliable And Secure, And Doesn't Leak.
The Heavy Duty Flow Switch Is Designed To Handle The Most Difficult Applications; Responsible for the environment.
TOP 3

CLOUDBERG 1100gph Automatic bilge pump

CLOUDBERG
6.10 x 3.54 x 4.53 inches
1.21 pounds

Our Score

4.75

Product Features

M (Wire Lead): 1M; Dimensions of the outlet 29Mm/ 0. 1 foot 95 inch 1/8"); Width: Approx. 81Mm
There's no need for a separate float switch because the system has one built in.
Until the internal float switch activates the pump (when the water level rises), there is no power consumption.
Flow rate in gallons per minute (gph): 1100Gph; 12V; 12V; 12V; 12V; 12V; 12V; 12 (A) Currently: Head(M):
Durable: All (Auto) Bilge Pumps Are Constructed With A Compact, Rust And Corrosion-Protected Stainless Steel Shaft, As Well As A High-Pressure, High-Pressure, High-Pressure, High-Pressure, High-Pressure, High-Pressure, High- ABS Plastic Housing With Impact Resistance And Thermoplastic Properties.
Rv Caravan Yacht Electric Motor Boat Application
TOP 4

Rule 500 GPH 25SA Electronic Sensing Bilge Pump-500

Rule
25SA
7.00 x 7.00 x 3.00 inches
0.80 pounds

Our Score

4.75

Product Features

Ignition Protection And Submersible
No float switch required; fully automatic with manual override
316L stainless steel Shaft made of steel
Backflow Preventer is also included in the package.
Motor with a high efficiency and low amperage
TOP 5

attwood 4511-7 Sahara S1100 Automatic Bilge Pump

attwood
4511-7
7.43 x 10.93 x 8.62 inches
1.33 pounds

Our Score

4.75

Product Features

For Vessels 20 Feet and Up With Sleeping Accommodations, Meets Automatic Switch Pump Requirements
For larger recreational boats, it provides dependable bilge water pumping.
Installs In Tight Spaces Quickly And Easily, Only Mounts Horizontally
Larger boats and yachts will benefit from the increased capacity.
Pump, wire seals, strainer, and mercury-free mercury-free mercury-free mercury-free mercury-free mercury-free mercury-free mercury-free mercury-free mercury-free mercury-free mercury- In One Unit, There Is A Free Switch
It also comes with a 29-day money back guarantee. 16-inch Inch Length Uses a 1-gauge copper wire that has been caulked and tinned, as well as a 1-gauge copper wire that has been caulked and tinned. 1/8- Hose with a diameter of one inch in the interior
Volt, 1. The Amp Draw Pump is rated for 1100 Gph at open flow (at a voltage of 13.0 volts). 6 volts direct current)
TOP 6

Dontmiss Automatic Submersible Small Boat Bilge Pump 12v 1100gph Auto

Dontmiss
1.20 pounds

Our Score

4.7

Product Features

M (Wire Lead): 1M; Dimensions of the outlet 29Mm/ 0. 1 foot 95 inch 1/8"); Width: Approx. 81Mm
Connection in Automatic Mode: Brown No Wiring, Black Wire To Negative, Brown White Wire To Positive, Black Wire To Negative non- Connection in Automatic Mode: Convert Black to Negative, Brown to Positive, and Brown White to No Wiring.
Until the internal float switch activates the pump (when the water level rises), there is no power consumption.
Flow rate in gallons per minute (gph): 1100Gph; 12V; 12V; 12V; 12V; 12V; 12V; 12 (A) Currently: Head(M):
For easy, fully automatic operation, a built-in electronic controlled Reed Sensor System is included.
There's a float switch built in! (There is no need for a separate float switch.)
TOP 7

Johnson Pump 05903-00 Cartridge Combo Automatic Submersible Bilge Pump

Johnson Pump
05903-00
7.00 x 4.50 x 7.50 inches
0.52 pounds

Our Score

4.6

Product Features

Easy-to-Use Features Set up the Dura- Ports for releasing cargo
The Electro-Mechanical System Operates Automatically Switch with a Magnetic Float
A straight and a 90 smooth elbow Dura-Pump is included in the set. A Removable Check Valve As Well As A Port
Overtightened hose clamps cause stress cracking, which is avoided by using ports.
The flow rate is: 1000 Gph
TOP 8

Amarine-made 12v 1100gph Auto Boat Bilge Pump Automatic Submersible Boat Bilge Water Pump

Amarine Made

Our Score

4.6

Product Features

There's a float switch built in! (There is no need for a separate float switch.)
Fully submersible electric pump that is small, automatic, and compact.
Until the internal float switch activates the pump (when the water level rises), there is no power consumption.
For easy, fully automatic operation, a built-in electronic controlled Reed Sensor System is included.
Motor is compact, efficient, and long-lasting. Corrosion-resistant and rustproof; Shaft is made of 316L stainless steel. High- Housing made of impact-resistant plastic
TOP 9

ECO-WORTHY Automatic Submersible Boat Bilge Water Pump 12V 1100GPH Auto

ECO-WORTHY

Our Score

4.55

Product Features

M (Wire Lead): 1M; Dimensions of the outlet 29 Mm/(1- 1/8)Inch; Width: Approx. 81Mm
The flow rate is: 1100Gph; 12V; 12V; 12V; 12V; 12V; 12V; 12 Head:
Until the internal float switch activates the pump (when the water level rises), there is no power consumption.
For easy, fully automatic operation, a built-in electronic controlled Reed Sensor System is included.
There's a float switch built in! (There is no need for a separate float switch.)
TOP 10

SAILFLO Automatic Submersible Boat Bilge Water Pump 12v 750gph Auto

SAILFLO
1.10 pounds

Our Score

4.55

Product Features

When the water level rises, the pump starts working.
All- a single pump When the water level rises past the strainer, it will automatically turn on.
Snap- For Easy Cleaning, Use An Off Strainer
Motors with Stainless Steel Shafts and Tough Thermoplastic Bodies for Heavy Duty Applications
Instructions for either a 2 or 3 wire setup are simple to follow. (To a manual switch, an automatic switch, or both)
TOP 11

AIRTAK Bilge Pump for Boat DC12V 1500GPH Small Bilge Pump 12 Volt Electric Water Pump Low Noise

AIRTAK
9.45 x 3.74 x 7.68 inches

Our Score

4.45

Product Features

Moisture Ting Seals are a one-of-a-kind seal that protects against moisture. The Bilge Pump is made of heavy-duty marine sealant and corrosion-resistant materials.
Motors with a small footprint and a long life span: Long-life motors are used in this small volume and portable bilge pump. It has the potential to boost productivity at work.
Wide Range of Use: A bilge pump can be used to easily drain water in aquariums, fishing boats, and fountains, among other places.
Installing Is Simple: It Can Be Used With The Bilge Switch If You Design A Common Installation Location
Strainer that is easy to clean: High-quality, easy-to-clean snap-lock strainers make use of the pump base. The bilge pump's lifespan could be extended.
TOP 12

CO-Z 750gph Bilge Pump for Boats Pools and More, 12V Water Pump with Float Switch, Automatic Submersible Pump

CO-Z

Our Score

4.35

Product Features

The 66W motor is small and compact. This boat pump's 3 blade impeller is driven by a small 66 Watt copper wire motor that can be powered by any standard 12V battery and can deliver a flow rate of up to 750 Gph (2. 8 MPH) With A 9-Foot Lift, Quickly And Efficiently Removing Excess Water
Bilge Pump with Automatic Control: This Co- The Z Water Pump can operate continuously even when fully submerged, or use its built-in float switch to turn off automatically once the water level has been reduced to about 1. a depth of 2 inches; If water continues to enter the system, the pump will automatically reactivate as needed.
Wide Range of Use: This versatile pump is ideal for clearing bilge water from yachts, motorboats, and sailboats, but it can also be used to remove unwanted water from swimming pools, fountains, ponds, flooded basements, spas, home renovation or construction sites, and more!
100% Customer Satisfaction Guaranteed: With its strong 1 year warranty and co-branding, you can order this Fcc and Ce certified pump with confidence. Z's Known For Friendly 24/7 Customer Service; Order With Confidence And Start Getting More Reliable Drainage Today!
Construction that is long lasting: To protect the electrical components, the ABS plastic casing of our marine pump is wear and tear resistant and completely waterproof. The Copper Wiring Is Tin Plated Inside Its Insulation To Provide Long-Term Corrosion Resistance In High Humidity And Maritime Environments; Also included is a strong straining filter that locks in place but snaps out easily for easy cleaning.
TOP 13

Submersible Boat Bilge Water Pump 12v 1100gph Non-Automatic Marine Electric Bilge Pump

MAXZONE

Our Score

4.25

Product Features

Flow: Head: 1100 gallons per hour or 5000 liters per hour Outlet Diameter: 13 Ft (4 Mts) 1/8" (29mm) is a unit of measurement used to describe the thickness of a piece of
The flow rate is: 1100 Gph; Voltage: 12 Vdc
Usages that are common: Suitable For Hydraulic Systems With Cold Water In Line That Will Be Fed By Gravity Or Pressure
Ideal for fishing boats, cruisers, runabouts, yachts, and other similar vessels.
Built To Withstand The Most Adverse Conditions, They Are Suitable For The Harsh Marine Environment. The Source of Water The use of a cooled engine ensures that the engine will last a long time.
TOP 14

Amarine Made Automatic Submersible Boat Bilge Water Pump 12v 760gph Auto

Amarine Made

Our Score

4.2

Product Features

There's a float switch built in! (There is no need for a separate float switch.)
Fully submersible electric pump that is small, automatic, and compact.
Until the internal float switch activates the pump (when the water level rises), there is no power consumption.
For easy, fully automatic operation, a built-in electronic controlled Reed Sensor System is included.
Motor is compact, efficient, and long-lasting. Corrosion-resistant and rustproof; Shaft is made of 316L stainless steel. High- Housing made of impact-resistant plastic
TOP 15

UYGALAXY Boat Bilge Pump with Float Switch 1100GPH 12V 12ft Head Automatic Submersible Water Pump

UYGALAXY

Our Score

4.2

Product Features

Bilge Pump Can Automatically Turn On/Off Based On Water Level [Built-In Float Switch]
[Small Size] For a small space, but powerful (1100Gph/12Ft Head) in removing water.
No Slip [With Clamps] For Fastening The Outlet To The Tube.
[Warranty] 1 Year 100% Money Back Or Change If Any Problem With Any Problem With Any Problem With Any Problem With Any Problem With The Technical Support Team Will Be At Your Service For The Rest Of Your Life.
Anti-Ignition And Diving Protection [Ignition And Diving Protection] No Leakage, Air Lock Design, Sealing Molding, Reliable And Safe.
TOP 16

Dontmiss Submersible Boat Bilge Water Pump 12v 1100gph Non-Automatic Marine Electric Bilge Pump

Dontmiss
0.84 pounds

Our Score

4.15

Product Features

Flow: Head: 1100 gallons per hour or 5000 liters per hour Outlet Diameter: 13 Ft (4 Mts) 1/8" (29mm) is a unit of measurement used to describe the thickness of a piece of
The flow rate is: 1100 Gph; Voltage: 12 Vdc
The Long-Term Use Of A Unique Automatic "Discharge" Function Impact Resistant Abs Housing for Long Term Continuous Operation in Nearly Congested Conditions.
Small size, high efficiency, and low current (supporting low-cost switching power supplies); To Achieve A Perfect Combination Of High Flow In A Small Size
Tough Heavy Duty Motors With Stainless Steel Shafts Thermoplastic Bodies are thermoplastic bodies that are made of plastic.
TOP 17

Rule 51S Marine Rule 1500 Automatic Bilge Pump

Rule
12.00 x 8.00 x 7.00 inches
3.50 pounds

Our Score

4.05

Product Features

Bilge Pumps in the Electronic Sensing Series
3 Year Warranty on a Genuine Rule Pump
Every 2 seconds, the impeller of the pump is rotated. Approximately one second for half a minute
If there is any water present, the pump will detect resistance and continue to run until all of the water has been removed.
A Convenient Method For Constantly Sensing The Presence Of Water
TOP 18

Rule 10, Bilge Pump, 2000 GPH, Non-Automatic

Rule
5.25 x 6.00 x 4.50 inches
3.50 pounds

Our Score

4

Product Features

At a lower cost, this pump has more pumping capacity and exclusive design features than any comparable competitive pump.
Don't settle for anything less than a genuine Rule product.
Silent and vibration-free operation, Stainless Steel Shaft, Submersible to the depths of the ocean, Rust and Corrosion Resistant
Compact, effective, and long-lasting are three words that come to mind when thinking about this product. Motors with a long life span and the ability to run dry for short periods of time
Warranty of 3 Years
1/8 of an inch (28. Hose Barb Discharge Outlet (6 millimeters)