22 Of Best Car Dual Channel Amplifiers In 2024

TOP 1

Pioneer GM-A3702 2-Channel Bridgeable Amplifier

Pioneer
GM-A3702
9.70 x 7.10 x 2.40 inches
3.10 pounds

Our Score

4.9

Product Features

Turn-by-Turn Detection And Automatic Signal Sensing
Maximum Power: 500 Watts
Control of the Volt Input Level
Input Circuit with a Balanced Isolator
TOP 2

fosa Mini Audio Amplifier, Portable Dual Channel HiFi Stereo Auto Car Audio Power Amplifier

fosa
0.53 pounds

Our Score

4.85

Product Features

Making Use of High-Definition Video The Output Power Of This Power Audio Amplifier Chip Is 25Wx2Rms.
To eliminate all types of electromagnetic interference, the shell is made entirely of aluminum alloy.
Easy to connect with two pairs of speaker output clips.
The Tone / Direct switch allows for customized listening via separate bass and treble adjustments, or the original audio source signal can be passed through without being enhanced.
Rca & 3. Audio input of 5 millimeters (mm). Supports a wide range of audio input devices, including cell phones, DVD players, computers, MP3/MP4 players, and so on.
TOP 3

Orion Cobalt 2 channel amplifier

.AVD.
CBT15002

Our Score

4.75

Product Features

This Orion Cobalt Multichannel Subwoofer Amplifier is designed in a Class A/B topology. When there is no audio signal, a Class A amplifier has a lot of current flowing through its output, whereas a Class B amplifier has no current flowing through it.
The 2 Channel Bass Boost Amplifier has the following features: Response Time: Frequency 10Hz- 30 kHz, Bass Boost, Remote Bass Knob, Gain Control, 2-channel amplifier Way Protection, High/Low Level Inputs, Thermal Protection, Mosfet Power Supply, Led Power And Protection Indicator, and 2 Ohm Stable
Quality - This Class A/B 2 Channel Amplifier Has A Good Frequency Response Rate And A Good Crossover Network, Putting It In A Good Spot. This Subwoofer Amp For Car Speakers Stands Out Among The Others Due To Its Durable Design And Highly Efficient Performance.
The power rating distribution for this Class A/B 1500 Watt amplifier is as follows: 750 X 2 Max @ 2 Ohms, 375 X 2 Max @ 4 Ohms. A 2-channel amplifier is also included in the multichannel amplifier for car speakers. As Part Of Its Design, It Has A Way Protection Circuitry.
Low/High Level Inputs The Multichannel Subwoofer Amplifier For Car Stereo Speakers Has Low/High Level Inputs, which are measured in Voltages for a Low Level (Rca) Input. (/-) A Very High Level (/-) A Very High Level (/- Wattages are used to measure input (wire). Both basically carry the signal from your receiver to your amplifier and finally to your speakers.
TOP 4

2 Channel Car Stereo Amplifier

Pyramid
PB3818
16.50 x 12.50 x 4.00 inches
9.20 pounds

Our Score

4.75

Product Features

Silver- Rca Ports with Plates: The Rca ports on the car audio amplifier are silver-plated. Signal Loss Is Prevented By Plating The Subsonic Filter Enables Low-Frequency Audio End Interference To Be Removed In Order For Your Speakers To Always Deliver The Best Audio Quality
Power: 5000 Watts The Pyramid 2 Channel Car Amplifier Is Designed To Enhance The Sound Quality Of Your Vehicle's Audio System. It has a bridgeable output of up to 5000 W. Variable Bass Boost, Gain Control, and Fully Adjustable Electronic Crossovers are included.
Design in a Slim Size: The Car Amp's Small Size Makes Installation A Breeze, Making It Easy To Find A Place For This Small But Powerful Device. Additional Features Include Remote Turn On, Soft Turn On/Off The Circuit, Heavy-Duty Heavy-Duty Heavy-Duty Heavy-Duty Heavy-Duty Heavy-Duty Heavy-Duty Heavy-Duty Heavy-Duty Heavy-Duty Heavy- Heat Sink Made of Heavy-Duty Aluminum Alloy
Mosfet Pulse is an acronym for Mosfet Pulse, which stands for Mos The Mosfet Pulse Width Modulation Power Supply Provides A Distortion-Free Operating Environment. Free signal to your compact speakers, resulting in crisp and clear audio for an exceptional music experience. A Pulse Width Modulation System is also included.
Circuitry that is completely protected: This model is equipped with overload and short circuit protection to keep both your car and the stereo amplifier safe. Has Been Specifically Designed From The Ground Up To Provide A Safe And High-Quality Environment A Sturdy Form Factor With Quality Sound
TOP 5

Crunch PX 1000.2 Power Amplifier

Crunch
PX 1000.2
3.70 x 11.40 x 10.80 inches
4.60 pounds

Our Score

4.7

Product Features

@ 2 Ohms, 500 Watts Rms X 2
@ 4 Ohms, 250 Watts Rms X 2
Maximum Peak Power: a thousand watts
Speaker- (High-level) Inputs on a higher level
1000 Watts RMS x 1 @ 4 Ohm Bridged
TOP 6

BOSS Audio Systems PT1600 2 Channel Car Amplifier

BOSS Audio Systems
PT1600
14.00 x 10.31 x 2.25 inches
9.10 pounds

Our Score

4.65

Product Features

a complete set of options You can use a full range amplifier to power not only your speakers but also your subwoofers.
Power - Max Wattage: 800 Watts x 2 @2-Volts/Volts/Volts/Vol 400 Watts Max X 2 @4 ohms @4 ohms @4 ohms @4 oh 1600 Watts Max x 1 Bridged @4 Ohms @4 Ohms @4 Ohms @4 Ohms @4 Ohms @4 Ohms @4
Controlling the Gain - This feature allows you to change the amount of gain you want. The Gain Control Doesn't Change Volume; It Just Changes The Amount Of Signal That Comes From Your Receiver And Goes To Your Amplifier.
Bass Booster with Variable Levels - You Have Complete Control Over How Much Bass You Want To Pump Out To Your Subwoofer(S) With Variable Bass Boost.
Specs - Weight 9 lbs. Dimensions 14 X 10 3 X 2 3 Dimensions 14 X 10 3 X 2 3 Dimensions 14 X 10 3 X 2 3 Dimension
Power Supply for Mosfets - A Mosfet Is An Electrical Switch That Allows Electrical Current To Flow Through It. It Controls The Output Voltage And Current Precisely By Eliminating The Output Current Sensing Loss.
Topology of Class A/B - With no audio signal, Class A' amplifiers have a large amount of current flowing through their output transistors. Class B' amplifiers have no current flowing through their output transistors.
able to connect two points By connecting two amplifier channels, you can dramatically increase the power output to your speakers and subwoofers.
We Strongly Encourage Professional Installation Of This Product To Ensure Proper And Safe Functionality Boss Audio Systems Provides A Powerful 6 Year Platinum Online Dealer So Long As The Purchase Is Made Through We Strongly Encourage Professional Installation Of This Product To Ensure Proper And Safe Functionality
TOP 7

Planet Audio AC2600.2 2 Channel Car Amplifier

Planet Audio
AC2600.2
18.00 x 10.00 x 2.40 inches
10.40 pounds

Our Score

4.6

Product Features

2 Channels x 1300 W Max Power @ 2 Ohm
Max Power: 650 W @ 4 Ohm x 2 Channels
2600 W @ 4 Ohm Max Bridged Power X 1 Channels
Full- Mosfet Power Supply, Class A / B Topology
Inputs with low and high levels, a variable filter, and a variable bass boost
Blue Backlit Illumination with Remote Subwoofer Control
The following are the measurements: 18" deep x 10" wide x 2" tall
Platinum Online Dealer Warranty for 6 Years
TOP 8

Crunch 4 Channel and 2 channel 1000 Watt Amp A/B Class Car Stereo Amplifiers

Crunch
9.40 pounds

Our Score

4.5

Product Features

2 Ohms: a total of four 250-watt generators
Crunch Px has been updated. 1000 Crunch 2- and a four-channel 1000-watt amplifier Amplifier with 1000 watts per channel | Px-Px-Px-Px-Px-Px-P 1000
At 4 ohms, mono bridged 5000 Watts x 2
Amplifier in Class A/B
4 Ohms: 125 Watts x 4
TOP 9

Taramps DS 160X2 2 Ohms 2 Channels 160 Watts Compact Amplifier

Taramp's
DS160X2
8.00 x 15.00 x 12.00 inches
1.00 pounds

Our Score

4.4

Product Features

160 Watts
Size & Weight
2 Ohms
TOP 10

YaeCCC C-236 12V 2 Channel Powerful Car Audio Amplifier Bass AMP Aluminum

Yaeccc
8542141199

Our Score

4.3

Product Features

Low Pass Filter (LPF)
The Led Power Indicator is a device that measures the amount of light that is
The Rms Power Rating is a number that indicates how powerful a product is. 4 Ohms: 2 Ohms, 800 Watts X 2 Channel: 2 Channels x 1300 Watts
Case made of metal
Maximum Power Output: 4 Ohms: 2 Ohms, 1200 Watts X 2 Channel: 2 Channels x 1900 Watts
TOP 11

4 Channel High Power Amplifier

Yaeccc

Our Score

4.3

Product Features

Can connect up to four speakers, and has a six-phase high-frequency, intermediate-frequency, and low-frequency regulation system.
4 channel car amplifier that is brand new and of high quality.
This 4-Channel Amplifier Has A Fuse To Protect The Amplifier And The Electrical System Of Your Car From Thermal, Overload, and Short Circuit Conditions.
Double Low-Frequency Output, able to drive any size subwoofer within the 160W rated power
TOP 12

JBL Stage A6004 4-Channel 50W X 4 Full Range Amplifier

JBL
STAGEA6004
10.50 x 7.75 x 4.00 inches
3.53 pounds

Our Score

4.3

Product Features

Sensitivity0 is a parameter that should be entered. Variable32-Vote 5V High Pass Filter Low Pass Filter, 320Hz, Variable32- @45Hz0- 320Hz Bass Eq Ovp, Uvp, Ocp, Otp, 12Db Protectiondc, Ovp, Uvp, Ocp, Otp
Power Output90Wx4@4Ohms Frequency Response20-Hz General Specifications @Rop1% 20Khz1Db Thd Khz1Db Thd Khz1Db Th
TOP 13

Audiobank 2 Channels 1500 WATTS Bridgedable Car Audio Stereo Amplifier P1502- Remote Turn-On/Turn-Off Circuit

Audiobank

Our Score

4.2

Product Features

Maximum Power Output: 1500W
Separation of Channels: 90Db
Tri- Using the Mode: Yes
Ratio of S/N: 99Db
(Variable) Low Pass Crossover: 40Hz- 300Hz
TOP 14

BOSS Audio Systems R2504 1000 Watt 4 Channel Car Audio Power Stereo Amplifier

BOSS Audio Systems
9.00 pounds

Our Score

4.15

Product Features

Mosfet and Inputs: Mosfet Power; Mosfet Power; Mosfet Power; Mosfet Power; Mosfet A/B classification; Input at high and low levels; Crossing of the High and Low Passes
Amplifier type: Power: 90 Watts x 4 Channels @ 4 Ohm Rms Max Power: 250 Watts x 4 Channels @ 2 Ohms; Max Bridged Power: 500 Watt X 2 Channel @ 4 Ohm; Maximum power of 1000 watts; Stable at 2 Ohms
Kit for Wiring: Red Power Cable, 20 Feet, 8 Gauge; High-Quality Fuse Holder for the Competition; Ring Terminal with a Gold Plated Diameter of 25 Inches; Black 8 gauge ground cable, 3 ft. Ring Terminal with a Gold Plated Number 10; 3 Rubber Grommets; 16 Foot 18 Gauge Blue Turn On Wire; 20 Foot High Performance Rca Interconnect; 16 Foot 18 Gauge Blue Turn On Wire 30 ft. speaker wire; 0 ft. speaker wire Ring Terminal, 3125 Inch, Gold Plated; Tubing with a 6 foot split loom; Wire Ties, 4 Inch, 20
Specifications include: The signal-to-noise ratio (SNR) is a measurement of how much information >102Db; Thd: 01%; The following are the measurements: 10 7/16" W X 2 1/8" H X 10 2/332" L
Features: Boss Logo in Blue Light; Remote Subwoofer Level Control Included; Variable Bass Boost
TOP 15

Crunch PX-1000.2 2 Channel 1000 Watt Amp A/B Car Stereo Amplifier + Wiring Kit

Crunch
PX-1000.2 + AKS8
6.00 pounds

Our Score

4.1

Product Features

Power:
Px 1000 should be crunched. 2 Amplifier for Cars with 2 Channels
At 4 ohms, mono bridged 1000 Watts multiplied by one
4 Ohms: 250 Watts x 2
2 Ohms: a total of two 500-watt generators
TOP 16

New BOSS Audio R1004 400 Watt 4 Channel Car Power Amplifier Mosfet+8 Ga Amp Kit

BOSS
FBA_R1004 + AKS8
6.00 pounds

Our Score

4.1

Product Features

Class A/B 4 Channel: The number of output channels is a multiple of the number of output channels. With low distortion and high reliability, Class A/B circuit design runs cooler and more efficiently.
400- Power in Watts: Amplifier with 400 watts of high output and four channels; At 2 ohms, the maximum output power is: a total of 100 watts multiplied by four; At 4 ohms, Rms Power is: wattage x 4 = 38 watts
Thermal Overload; Hi/Low Inputs: High And Low Level Inputs
Specifications of the Amplifier: Impedance is the measure of how much resistance there is between two points Stable at two ohms Frequency Response: Variable Bass Boost; Bass Boost: Variable 1 db from 12 Hz to 22 kHz; Thd: 05%; The signal-to-noise ratio (SNR) is a measurement of how much information >95 Db; Weight: 6 Pounds; (L X W X H) Dimensions (L X W X H) Dimensions (L X W X H) Dimensions: 75 x 9 x 2 inches 1 year warranty from the manufacturer
Wiring Kit for Gauge Installation: 20 feet of 8 gauge red power cable, 3 feet of 8 gauge black ground cable, and 30 feet of speaker wire are included, as well as 20, 4 inch wire ties and 0. Number 10 Gold Plated Ring Terminal, 0.25 Inch Gold Plated Ring Terminal, 0.25 Inch Gold Plated Ring Terminal, 0.25 Inch Gold Plated Ring Terminal, 0.25 Inch Gold 3 Rubber Grommets, 31 Inch Gold Plated Ring Terminal, Competition High Quality Fuse Holder, 16 Foot 18 Gauge Blue Turn On Wire, 20 Foot High Performance Rca Interconnect, 31 Inch Gold Plated Ring Terminal, Competition High Quality Fuse Holder, 16 Foot 18 Gauge Blue Turn On Wire, 20 Foot High Performance Rca Interconnect, 31 Inch Gold Plated Ring Terminal
TOP 17

JVC KS-AX202 300W AX Series Class AB 2 Channel Amplifier

JVC
KS-AX202
7.31 x 7.38 x 2.00 inches

Our Score

4

Product Features

Design - Built Tough And Compact, It Fits Easily Under A Seat And Is Built To Last By Jvc.
Power - Maximum Power Output Of 300 Watts In Pure Class A/B. The Rms Power Rating is a number that indicates how powerful a product is. 4 Ohms: Chan. 40 Watts X 2 / 2 Ohms: Chan. 60 Watts X 2 / Connected: 4 Ohms: 1 Chan x 120 Watts Without the need for Rca preouts, you can install your system in a variety of ways.
Amplifier with intelligence - Jvc uses a triple protection circuit to protect against damage caused by thermal, overload, and speaker shorts.
Flexibility is an important characteristic. Rca Inputs allow the amp to be used with a headunit that has Rca Preouts, and there is also a high-quality headphone jack. Enjoy Flexible Installation In A Variety Of Systems With A Level Input For Connection To Your Factory Radio Without Rca Preouts
Controlling the amount of bass boost - Bass Boost Control Can Be Set To Apply The Right Level Of Bass Reproduction For A Type Of Music With High And Low Intensity Level Settings
TOP 18

Hifonics BXX800.4 Brutus 800W RMS A/B 4 Channel Speaker Car Audio Amplifier

Hifonics
BXX800.4
16.40 x 10.10 x 3.60 inches
5.60 pounds

Our Score

4

Product Features

Amplifier for four channels in a car
TOP 19

Hifonics BG-1300.1D Brutus Gamma Monoblock Super D Class 1300 Watt Car Audio Sound System Subwoofer Speaker Amp Amplifier

Hifonics
8.75 pounds

Our Score

4

Product Features

The mission: With Mono Only Mode, Variable Electronic Crossover, and Electronic Equalizer Capabilities, you have complete control over your sound. Monitor Overload and Speaker Short Protection On The Amplifier End Panel With Illuminated Indicators
Sound with Impact: With this Super D Class, 1,300-watt amplifier, you can deliver powerful sound to your speakers and subwoofers. Mono Car Audio Amplifier, Watts; Included is a wired bass remote control.
Power: Ratings of Strength: - @ 1 ohms 1300 Watts per channel; @ a resistance of 2 ohms - 650 Watts per channel on one channel; @ a resistance of 4 ohms - 325 Watts per channel; Dual Coil Pulse Width Modulated Power Supply Maintains Voltage Consistency Using Ultra-Short Pulse Width Modulated Power Supply Fi Devices with Outputs
Technology for the output: Ultra- For powerful sound, efficient cooling, and minimal distortion, Fi Moset Output Device Technology and classic Hifonics Aluminum Construction are combined.
Connectors are devices that connect two or more objects together. Molded Connection Terminal With Simple-to-Use Installation Accessible, angled ports for all power, ground, and speaker connections, as well as a high-capacity battery. Temperature, Nickel-Resistant, and Impact-Resistant Connectors with a plated finish Nickel- Plated Connectors Provide Efficient High/Low Level Audio, Crisp Sound, And A Secure And Erosion-Resistant Connection. Seal of Resistance
TOP 20

Cerwin-Vega B52 Stealth Bomber Class D Amp

Cerwin-Vega
10.60 x 6.00 x 2.50 inches
2.50 pounds

Our Score

3.95

Product Features

Ultra-compact, high-performance Chassis made of a high-density aluminum alloy
Ir Chipset (Class D)
Speaker- Input Level With Auto Turn-
Output of Mosfets with Directed Power
Thermal Protection and Advanced Rollback
TOP 21

High Power Digital Power Amplifier Board

Thincol
Thincol5oez8n6bwk
3.94 x 4.25 x 0.71 inches
0.39 pounds

Our Score

3.95

Product Features

Overvoltage Protection, and Output Current Limit are all included in the protection package.
As A Single-Use Device, It Produces A High Power Output As A Btl Amplifier With Bd Modulation And Low Noise, Output 420W As A Double Ended Amplifier, Output 2 X 210W
When the power is turned on or off, there is no bang. Pwm Output Switch with Zero Dead Time.
Full- Featured, Small Quiescent Current, High Efficiency. It is possible to effectively protect the speaker.
Clock Switching Frequency Can Be Externally Synchronized at a Fixed Frequency
TOP 22

Power Acoustik RZ4-1200D 1200W Class D 4 Channel Amplifier

Power Acoustik
RZ4-1200D
13.50 x 6.50 x 3.50 inches
3.50 pounds

Our Score

3.95

Product Features

1200- Watts Maximum Power, 100-Watts At 4-watts per watt, watts multiplied by four Ohm, 150- At 2-Watts, multiply by four. Ohm, 300- At 4-watts, multiply by two to get a total of watts. Bridged Ohm Array
Ohm Bridged/2- Ohm Bridged/2- Ohm Bridged/2- Oh Full Range Stereo Class D Ohm Ohm Ohm Ohm Ohm Ohm Ohm Ohm
PWM Mosfet Power Supply