19 Of Best Car Mono Amplifiers In 2024

TOP 1

Kicker 46CXA8001 Car Audio Class D Amp Mono 1600W Peak Sub Amplifier CXA800.1

Kicker
46CXA800.1
12.00 x 4.00 x 9.00 inches
5.15 pounds

Our Score

4.9

Product Features

Crossovers with variable 12db levels allow you to dial in the perfect sound.
Effective Class- Amplifier type D
Crossovers with variable 12db levels allow you to dial in the perfect sound.
Kickeq 6db Variable Bass Boost For Those Low Frequencies Kickeq 6db Variable Bass Boost For Those Low Frequencies Kickeq 6db Variable Bass
Subsonic Filter with a 24 dB reduction for protection against potentially harmful frequencies
TOP 2

KICKER CX400.1 400 Watt Class D Mono Amplifier

KICKER
46CXA4001T

Our Score

4.85

Product Features

A Three-Dimensional Design To Remove Unwanted Interference, a second on/off delay is used.
The Mono Series Is A Powerful Class-Based System. For Your Car, D Amplifier
You Can Control The Dial With Variable 12 Db Crossovers To Optimize Your Sound
For Any Low Frequencies You May Run Into, Kickeq 6 Db Variable Bass Boost
Subsonic protection of 24 dB protects the speaker from potentially damaging frequencies.
TOP 3

BLAUPUNKT AMP3000D 3000W 1-Channel Monoblock Amplifier

BLAUPUNKT
AMP3000D
16.50 x 8.50 x 3.25 inches

Our Score

4.75

Product Features

Maximum Power Output: Rca Input: 3000W / 3000W / 3000W / 3000W / 3000 Fuse / 2 Channel: 40A X 3
Class of Amplifier: d / Voltage Supply; d / Monoblock Amplifier; d / Monoblock Amplifier; d / Monoblock Ampl 11- 16V Dc
4 Ohms Rms Power: 380 watts x 1 / 2 ohms: 630 Watts x 1 / 1 ohm: 800W X 1
Response Time: Frequency 10Hz - 96Db / 250Hz / Signal to Noise Ratio
The frequency of a crossover is defined as the number of times a signal crosses from one 50Hz- Crossover Slope: 250Hz / 250Hz / 250Hz / 250Hz / 250Hz / Gain Adjustment:200Mv 8V / 24Db/Oct
TOP 4

BOSS Audio Systems R1100M Riot Series Car Audio Subwoofer Amplifier

BOSS Audio Systems
R1100M
9.13 x 10.44 x 2.25 inches
4.40 pounds

Our Score

4.75

Product Features

Topology of Class A/B - With no audio signal, Class A' amplifiers have a massive amount of current flowing through their output transistors. No current flows through the outputs of Class B' amplifiers when there is no audio signal.
Power - Max X 1 @ 2 Ohms: 1100 Max X 1 @ 4 Ohms: 550 Max X 1 @ 2 Ohms
Assurance - For purchases made through Amazon, Boss Audio Systems offers a 6-year Platinum Online Dealer Warranty. com. To ensure proper functionality, we strongly recommend that this product be installed by a professional.
Low-Intensity Variable Crossover Pass - Sound is reproduced by subwoofers using a variety of low-frequency sources. Frequencies in the range You can specify exact sound specifications for the reproduction of bass frequencies.
Input Gain Control with Variable Values - The Gain Control Is Not For Volume Adjustment. It simply modifies the amount of signal received from your receiver and sent to your amplifier.
Bass Booster that can be turned on and off - Bass Boost Allows You To Fine-Tune The Low Bass Within The Boost Range To Your Specific Taste.
Specs - The following are the measurements: 13 X 10. 44 X 2. Weight: 25 kg 43 Lbs. , Impedance of the Speaker: Output: 2 to 8 Ohm, Thd @ Rms S/N Ratio: 1%, 1%, 1%, 1%, 1%, 1%, 1%, 1%, 1%, Frequency Response: 102 Db, 102 Db, 102 Db, 102 Db, 102 Fuse Quantity: 9 Hz to 50 kHz, 9 Hz to 50 kHz, 9 Hz to 50 kHz 1 Ato Blade (30 Amp)
Power Supply for Mosfets - A Mosfet Is A Type Of Electrical Switch That Allows Current To Flow. It regulates the voltage at the output.
a modest amount Voltages are used to measure a low level (Rca) input. (/-) A Very High Level (/-) A Very High Level (/- Wattages are used to measure input (wire). Both basically carry the signal from your receiver to your amplifier and finally to your speakers.
TOP 5

Alpine S-A60M S-Series Class D Mono Amplifier

ALPINE
S-A60M
11.00 x 11.00 x 5.00 inches
5.58 pounds

Our Score

4.75

Product Features

Speakers And Preamp- Inputs at various levels
At 4 Ohms, 330 Watts Rms X 1
Bass Boost with Variable Levels
TOP 6

Power Acoustik OD1-5000D Overdrive Series 5000 Watts Max 1 Ohm Mosfet Power Supply Class D Car Audio Monoblock Amplifier

Power Acoustik
OW-OD1-5000D
8.05 pounds

Our Score

4.75

Product Features

Stereo at 1 Ohm: For Maximum Power, Use an Ohm Stable Monoblock Operation
Bridge Two Monoblocks Together To Get Double Power
mosfet power supply mosfet power supply mosfet power supply Military- Pwm Mosfet Power Supply on a Grade PCB
Protection from Overload Circuits: Short-circuit, thermal, and overload circuit protection are all available.
Specifications include: Low/Rca Input And High/Speaker Level; 4G power wire and 8G speaker wire outputs; 12Db high and low pass crossovers that can be adjusted; Low Octave Harmonics are increased by a 12db bass boost; (L X W X H) Dimensions (L X W X H) Dimensions (L X W X H) 25 X 8. Dimensions: 75 X 4 Inches Weight: 22 Pounds
TOP 7

MRV-M500 - Alpine Monoblock 500W RMS V Power Series Car Amplifier

ALPINE
MRV-M500
4.00 x 10.00 x 10.00 inches
5.00 pounds

Our Score

4.65

Product Features

The Transition to a Digital Class D Platform
Mrv- M500 - Alpine 500W RMS Monoblock Amplifier
New Snap- For Ease of Installation, On Terminal Covers
In: Dimensions (Wxhxd) In: Dimensions (Wxhxd) In: Dimensions (Wx 2'' X 7/8'' 7/16'' X 3/16'' X 3/16'' X 3/16'' 7/8''
Protective measures currently in place: Over- Current, Excessive Under-voltage, Voltage Protection From Voltage And Heat
TOP 8

Skar Audio RP-800.1D Monoblock Class D MOSFET Amplifier

Skar Audio
RP-800.1D
16.00 x 7.00 x 3.00 inches
6.60 pounds

Our Score

4.55

Product Features

At 1 ohm, the maximum output power is: Rms Power At 1 Ohm: 1,200 Watts | Rms Power At 1 Ohm: 800 Watts
Power Amplifier with Mosfets in Class D
At 1 ohm, it's stable, and there's a remote control for the subwoofer's level.
Maximum Reliability Is Achieved With A Highly Efficient Heatsink Design
Response Time: Frequency 20Hz - On, 250 Hz With a 6 or 12 dB boost at 45Hz, the board bass EQ switch can be used.
There are four of them. Circuitry For Way Protection And 4 Gauge Power
TOP 9

Rockford Fosgate R500X1D Prime 1-Channel Class D Amplifier

Rockford Fosgate
R500X1D
8.50 x 6.70 x 1.90 inches
6.00 pounds

Our Score

4.45

Product Features

Lp/Hp/Ap Crossover 12Db/Octave onboard Gauge for Power Wires- 4 Awg. Connector for Power Input - Terminal with a screw Alternator Suggestion- 75 A
@ 4-300 Watts X 1 500 Watts X 1 @ 2-Ohms @ 500 Ohms @ 500 Ohms @ 500 Ohms @ 500 Ohms 20Hz to 250Hz /- Ohms, Frequency
At 45Hz, a board punch EQ with an 18db boost is used. Sensitivity to the input From 150 millivolts to four millivolts
Wired Remote Control (Punch Level Control) is included in the package. Design of a high-efficiency amplifier that reduces the charging system's current consumption
Heatsink made of cast aluminum with a top-mounted control panel that blends in.
TOP 10

ALPINE S-A60M 600 Watt RMS Mono Car Audio Amplifier Subwoofer Class-D+Bass Knob

ALPINE
S-A60M+RWK41+RUX-KNOB.2

Our Score

4.4

Product Features

Alpines Amplifier Circuit in Class D. Cta- 2006- B Power Level: 4Ohm, 14.3V, 330W Rms X 1 4V ? 1% Thd N); 1% Thd N; 1% Thd N; 1% Thd N 600 watts RMS x 1 (2 ohm, 14.4 volts) 4V ? 1% Thd+N)
Alpine S- A60M 600 Watt Rms Mono Car Audio Amplifier Subwoofer Amplifier A60M 600 Watt Rms Mono Car Audio Amplifier A60M 600 Watt Rms Mono Car Audio Ampl (1) Rux Alpine- Knob. 2 Bass Knobs With Remote Control For Alpine Amplifiers Specifications include:
Ratio of S/N: >85 decibels (Ref: >105Db (Ref: 1W Into 4 Ohm); 1W Into 4 Ohm); 1W Into 4 Ohm; 1W Into 4 Ohm rated power into a 4 ohm resistor). Thd+N ? % (Ref 1W Info 4 Ohm) Response Time: Frequency 10Hz- (/-) 400 Hz 3 Db). Factor of Damping: > 1000
Compatible with Rux-compatible remote bass knob (requires Rux-compatible remote bass knob). Knob. 2, Sold Individually)
TOP 11

BOSS Audio Systems R1100MK Car Amplifier and 8 Gauge Wiring Kit

BOSS Audio Systems
R1100MK
9.10 x 10.40 x 2.30 inches
8.00 pounds

Our Score

4.35

Product Features

Continuing with the Wiring Kit - 6 ft. of 10 5/16" and 1/4" ring terminals Split Loom Tubing, 3 Rubber Grommets, 20 4" Wire Ties, 20 Ft. Split Loom Tubing, 3 Rubber Grommets, 20 4" Wire Ties, 20 Ft. Blue Rca (Trca) Interconnect with High Performance
Kit for Wiring - 20 Ft. Speaker Wire, 30 Ft. Speaker Wire, 30 Ft. Speaker Wire, 30 Ft. Speaker 16-foot 8-gauge red power cable Turn-around 18 Ga Blue 3 ft. on wire Competition Quality Fuse Holder With Agu Fuse, 8 Ga Black Ground Cable
Assurance - So long as the purchase is made through Amazon, Boss Audio Systems offers a powerful 6 year Platinum Online Dealer Warranty. com. To ensure proper and safe functionality, we strongly recommend that this product be installed by a professional.
Low-Intensity Variable Crossover Pass - Sound is reproduced by subwoofers using a variety of low-frequency sources. Frequencies in the range You can specify exact sound specifications for the reproduction of bass frequencies.
Bass Booster that can be turned on and off - Bass Boost Allows You To Fine-Tune The Low Bass Within The Boost Range To Your Specific Taste.
Specs - The following are the measurements: 1 X 10. 4 X 2. 3. Dimensions: 4 Lbs.
Power Supply for Mosfets - A Mosfet Is A Type Of Electrical Switch That Allows Current To Flow. By removing the output current sensing loss, it precisely controls the output voltage and current.
Topology of Class A/B - With no audio signal, Class A' amplifiers have a massive amount of current flowing through their output transistors. No current flows through the outputs of Class B' amplifiers when there is no audio signal.
Power of the Amplifier - @2- @1100 Watts Max X 1 Ohms, 550 Watts Max X 1 @4- Ohms, 550 Watts Max X 1 @4- Ohms, 550 Watt Ohms
TOP 12

Rockford Fosgate R2-500X1 500-Watt Mono Amplifier

Rockford Fosgate
R2-500X1
4.38 pounds

Our Score

4.25

Product Features

This amp is extremely efficient thanks to Class D technology, which reduces demand on the vehicle's electrical system (RMS Power: 300 watts x 1 at 4 or 500 watts x 1 at 2)
The R2- 500X1 Full-Fledged Classification of Range- D Mono Amplifier (1.) D Mono Amplifier D Mono Amplifier D Mono 9" X 6. 8" X 8. With 500 Watts of RMS power, the 5" is jam-packed with features and performance to deliver power and bass on demand.
C. is featured. A P. Circuitry To Assist You In Adjusting Your Gain Settings With an integrated Punch Eq that corrects for acoustic deficiencies while delivering up to 3X the bass, the supply generates more power as the voltage rises.
Rockford Fosgate's renowned build quality is backed by a full 1-year warranty. When purchased from a Rockford Fosgate Authorized Reseller, the product comes with a one-year warranty.
A Variable Infrasonic Filter And Remote Level Control Are Designed For Subwoofers And Allow You To Tune The Bass To The Desired Level For The Music.
TOP 13

Hifonics BG-2200.1D Brutus Gamma 2200 Watt Mono Car Audio Amplifier Class D Amp

Hifonics
BG-2200.1D
17.70 x 10.90 x 4.20 inches
9.85 pounds

Our Score

4.15

Product Features

At 2 ohms, 1100 Watts x 1
Maximum power output: 2,200 Watts
Super Class D Technology Is Powered By Ultra-Low-Cost Ultra-Low-Cost Ultra- Fi Mosfets Provide High Power, Efficient Cooling, and Low Distortion
Response Time: Frequency The frequency ranges from ten to five hundred hertz (Hz).
At 4 Ohms, 550 Watts x 1
TOP 14

Kicker CX Series CX1800.1 1800W Mono Class D Mosfet Full-Range Car Amplifier

Kicker
43CXA18001
13.58 x 7.09 x 2.36 inches
9.02 pounds

Our Score

4.1

Product Features

@ 2 Ohms, 1800 Watts Rms X 1
Maximum Peak Power: 3600 Watts of power
Daisy Chain Multiple Amps Using Rca Outputs From A Preamp
Low-Intensity Variable Crossover Pass: 50 - 12 dB/Octave at 200 Hz
At 40 Hz, a variable bass boost of 0 to 12 dB is available.
TOP 15

Kicker 46CXA8001T CX Series 1600 Watt Max Power Class D Amp Monoblock Car Audio Sub Vehicle Amplifier

KICKER
CXA800.1T (46CXA800.1T)

Our Score

4

Product Features

Removes Interference That Isn't Wanted: Second Chance- Unwanted Interference is reduced by using an on/off delay.
With 800 Watts of power, it's a Class D design. Effective Class- D Amplifier with a peak power of 1600 watts and a rms power of 800 watts
Crossovers that are variable: Crossovers with variable 12db levels allow you to dial in the perfect sound.
Protection Against Harmful Frequencies: Subsonic Filter with a 24 dB reduction for protection against potentially harmful frequencies
Built-in Kickeq Bass Boost: Kickeq 6db Variable Bass Boost For Those Low Frequencies Kickeq 6db Variable Bass Boost For Those Low Frequencies Kickeq 6db Variable Bass
TOP 16

CT Sounds CT-700.1D Compact Class D Car Audio Monoblock Amplifier

CT Sounds

Our Score

4

Product Features

This mono amplifier's small footprint and compact chassis make it simple to install in any vehicle or car audio application. But don't be fooled by its diminutive size; this 700-watt amplifier packs a punch.
700 Watts RMS Power Car Audio Amplifier At 1-Volt Ohm Load is a term used to describe a load that is 14 ohms 4V); At 2-, 380 Watts Rms Ohm Load is a term used to describe a load that is 14 ohms 4V); At 4 o'clock, 200 watts Rms Ohm Load is a term used to describe a load that is 14 ohms 4V); Response Time: Frequency (Bass Knob Included) From 0 to 320 Hz
The Amplifier For Car Subwoofers Will Run Cool For Even The Most Demanding Playlists Thanks To Mosfet Pulse Width Modulated Power Supply And Proprietary Heat Dissipation Design
Engineered to be the most energy-efficient car monoblock amplifier in its class, allowing you to get the most out of your vehicle's electrical system.
High-voltage, low-voltage, over-current, and high-voltage protection circuitry are all included in the way protection circuitry. Protection from extreme temperatures; Sleep Well At Night Knowing That Your Car Audio Is Protected By A Class D Amplifier
TOP 17

Rockville dB15 6000 Watt Peak/1500w RMS Mono 2 Ohm Amplifier Car Audio Amp

Rockville
dB15
3.00 x 3.00 x 3.00 inches

Our Score

3.95

Product Features

Power Ratings of Dyno Certified Rms: (Certified Dyno Test / Less Than 1 % Thd) (Use These Ratings When Comparing With Top Brands Like Kicker, Rockford Fosgate, Etc.) 2 Ohm: 1 Channel x 1500 Watts
Car Audio Amplifier Rockville Db15 6000 Watt Peak/1500 Watt Dyno-Certified Rms Mono 2 Ohm Rockville Db15 6000 Watt Peak/1500 Watt Dyno-Certified Rms Rockville Db15 6000 Watt Peak/1500 Watt Rms Rockville Db15 6000 Watt
Line Output from a Rca Preamp. Circuitry for an 8-Volt Preamp. Led Indicator for the Status Mode. At Rated Power, the Minimum Thd is: 90Db. At a voltage of ten volts, the device is under voltage protection. At 16V, there is a protection against overvoltage.
Switch for controlling the phase of a process. Full Ic- Controlled Protection Circuitry is a type of protection circuit that is controlled by the user. Controlling the subwoofer from the dashboard. 12 dB Bass Equalizer that can be adjusted to your liking. Soft Start System With Mute And Delay
Peak: (Use these ratings to compare to top budget brands like Boss, Power Acoustik, and so on.) 2 Ohm: 6000 Watts on a single channel. 4 Ohm: 1 Channel, 3600 Watts
High- Mosfet Power Supply with a Fast Response Time. Class D Optical Coupler Technology With Differential Circuitry, Fully Adjustable 12Db / Octave Crossover. Filter with a low pass: 50Hz - 250Hz. Filter for subsonic waves: 15Hz - 55Hz.
Response Time: Frequency 15Hz - 250Hz. Factor of Damping: >150 Hz at 100 Hz Fuse with a current rating of 150 amps. The following are the measurements: 9" X 2" X 9" X 2" X 2" X 2" X 2" X 2" X 2" 4" X 17.
TOP 18

8'' Under-Seat Car Sub Woofer Modified Speaker Stereo Audio Bass Amplifier 4Ω 480W

Yaeccc
8541763286

Our Score

3.85

Product Features

Ultra-Large Box Design that is slim: The Box's Effective Interior Space Saving, The Box's Appearance With High-Definition Reduce Resonance with a Better Blanket Fabric Design.
The Use Of High-Definition Video To ensure pure sound quality, use a high-quality MDF board.
The Short Circuit Reverse Protection for the Box is built into the High Power Tube.
The Protective Cover for the Star: Collision protection is provided by the use of ABS plastic.
The Bass Is More Robust, And The Performance Is More Stable Because Of The Unique Paper Cone Design.
TOP 19

Audiotek AT8000M 1 Channel Monoblock Class D Car Amplifier

Audiotek

Our Score

3.85

Product Features

Tri-Mode Mosfet Amplifier | Bridgeable Mosfet Amplifier Heavy-duty | Heavy-duty | Heavy-duty | Heavy-duty | Heavy-duty Heat Sink Made of Heavy-Duty Aluminum Alloy
Monoblock Car Amplifier in Class D - 8000 Watts | 1 Ohm Stable | 8000 Watts | 1 Ohm Stable
Circuitry for Thermal and Speaker Short Protection | Power and Protection Indicators for LEDs
Remote Turn-On | Nickel Plated Rca And Speaker Level Inputs On/Turn- Mosfet Pulse Width Modulated Power Supply in Off Circuit
Class A- Continuously - B Operation Low-pass crossover with a variable slope: 0 to 18 dB | Subwoofer Control via Remote