21 Of Best Combined Drill Countersinks In 2024
TOP 1
F&D Tool Company 27049 Combined Drills and Countersinks Plain Type
F&D Tool Company
27049
Our Score
Product Features
New : Old : Dimensions of the body: 3/4 - Diameter of the drill bit 1/4
Drills that are used in conjunction
Combined Drills are a set of drills that are used together.
In the United States of America
TOP 2
KEO 10000 High-Speed Steel Plain Combined Drill and Countersink Set
KEO Cutters
10000
Our Score
Product Features
Uncoated Tools are suitable for a wide range of applications because they only have the base substrate without any additional treatment or coatings.
High- Speed Steel Tools are suitable for a wide range of general-purpose applications, as they combine hardness and toughness to provide excellent wear resistance.
This 5- One piece of each plain type combined drill is included in this piece set.
One, two, three, four, and five C'drills are included in the set.
Angle of 60 degrees
TOP 3
Drill America - DEWCCDS1-6 6 Piece High Speed Steel Combined Drill Bit and Countersink Set
Drill America
DEWCCDS1-6
6.00 x 4.00 x 2.00 inches
Our Score
Product Features
The black oxide treatment adds lubricity and creates small pockets on the tool's surface that act as a reservoir for coolant close to the cutting edge.
High- Speed Steel Tools are suitable for a wide range of general-purpose applications, as they combine hardness and toughness to provide excellent wear resistance.
When used in a counterclockwise (right-to-left) direction, Spiral Fluted Tools (Hand Cut) Evacuate Chips Up And Out Of The Cut, Reducing Clogging
Used to make center holes in work pieces that need to be machined between centers.
A Wide Range Of Toolholding Systems Can Be Used With Round Shanks.
TOP 4
KEO 10015#4-0 RH Combined Drill and Countersink
KEO
10015
0.02 pounds
Our Score
Product Features
Plain Type Combined Drill And Countersinks From Keo Are Used To Make Center Holes In Components Or Work Pieces That Require Machining Between Centers.
12 Pieces Per Pack
Countersinks and Drills in One
TOP 5
KEO 10500#5 RH Combined Drill and Countersink
KEO
10500
0.08 pounds
Our Score
Product Features
Plain Type Combined Drill And Countersinks From Keo Are Used To Make Center Holes In Components Or Work Pieces That Require Machining Between Centers.
12 Pieces Per Pack
Count of Units:
Countersinks and Drills in One
TOP 6
KEO #5 Combined Drill & Countersink - Carbide Carbide RH 60 Plain Str
KEO Cutters
19505
3.40 x 0.70 x 0.70 inches
0.50 pounds
Our Score
Product Features
Plain Type Solid Carbide Combined Drill And Countersinks With Straight Flute From Keo Are Used To Make Center Holes In Components Or Workpieces That Require Machining Between Centers.
1 x Package
Count of Units:
Countersinks and Drills in One
TOP 7
Micro 100 QDC-6 Combined Drill & Countersink
Micro 100
QDC-6
0.14 pounds
Our Score
Product Features
Countersinking and spot drilling are both possible uses for this tool.
Designed For Pre-School Children 60 Live Center Holes are being drilled.
Micro-Enterprises (Private Micro-Enterprises) are businesses Quik Quick Change System Increases Productivity by Providing Reliable Accuracy and Locational Repeatability.
Shank Design with Coolant Feed
In difficult-to-machine materials, the Altin Coated option adds lubricity and increases wear resistance.
TOP 8
KEO #7 Combined Drill & Countersink - 82 degree HSS RH 82 deg Plain
KEO Cutters
0.50 pounds
Our Score
Product Features
Dimensions of the body: 5/8"
TOP 9
Cle-Line C20895 HSS Combined Drill and Countersink
Cle-line
C20895
3.35 x 1.02 x 1.02 inches
0.17 pounds
Our Score
Product Features
1824 Combined Drill And Countersink No. 4
Drill And Countersink No. 4 (Plain Type)
Cle- Users of high-quality cutting tools are familiar with the name Line.
Cle- For Decades, Line Cutting Tools Have Been Specifically Designed For The Construction, Maintenance, Repair, Operating, And Industrial Markets.
Made in the United States of America
TOP 10
KEO 10010-TiN #5-0 RH Combined Drill and Countersink
KEO
10010-TiN
0.02 pounds
Our Score
Product Features
Dimensions of the package 5 cm L X 3 cm 3 Cm W X 5 Cm 3 Cm H
Type of product: Tools for Cutting
Quantity of the package:
Origin: United States United States of America
TOP 11
KEO 10003 Solid Carbide Plain Combined Drill and Countersink Set
KEO Cutters
10003
Our Score
Product Features
Uncoated Tools are suitable for a wide range of applications because they only have the base substrate without any additional treatment or coatings.
Solid Carbide Tools have a longer tool life and higher cutting speeds than other materials, but they are more brittle and require rigid toolholding systems.
This 5- One piece of each plain type combined drill is included in this piece set.
One, two, three, four, and five C'drills are included in the set.
Angle of 60 degrees
TOP 12
Cleveland C46262 High-Speed Steel Plain Combined Drill and Countersink
CLEVELAND
C46262
0.02 pounds
Our Score
Product Features
Uncoated Tools are suitable for a wide range of applications because they only have the base substrate without any additional treatment or coatings.
High- Speed Steel Tools are suitable for a wide range of general-purpose applications, as they combine hardness and toughness to provide excellent wear resistance.
Drill and countersink is a simple process that involves drilling and countersinking.
Made in the United States of America
Appropriate For Alloy- Materials such as tool steel, cast iron, carbon steel, and aluminum
The point angle is 118 degrees.
TOP 13
No.5 Solid Carbide 60° Combined Drill and Countersink
Star USA
Our Score
Product Features
Size of Wire Gauge: 5
Carbide Solid
Total Length: 3/4"
Diameter of the Drill 3/16"
Dimensions of the body: 7/16"
TOP 14
HSS Center Drill Set 60 Degree Combined Countersink #1,2,3,4,5 Machinist
Generic
1.00 pounds
Our Score
Product Features
Flute in a straight line
Center Drill Set (5 Pieces)
Size: 1 -
Weight of the shipment: 4 Ounce
Quantity: 1 (five)-piece set (per order)
TOP 15
SHARS HSS Center Drill Combined Drill and Countersink P }
Shars
0.38 pounds
Our Score
Product Features
In both mild and non-mild steels, hss material provides good wear resistance. Plastics, aluminum, copper, brass, bronze, rubber, and wood are examples of ferrous materials.
Made of premium M2 high-strength steel that has been ground.
TOP 16
CLEVELAND Combined Drill/Countersink
CLEVELAND
C46276
3.50 x 1.60 x 1.60 inches
1.00 pounds
Our Score
Product Features
Uncoated Tools are suitable for a wide range of applications because they only have the base substrate without any additional treatment or coatings.
High- Speed Steel Tools are suitable for a wide range of general-purpose applications, as they combine hardness and toughness to provide excellent wear resistance.
Made in the United States of America
Bell- Drilling and countersinking are two different types of drilling and countersinking.
Appropriate For Alloy- Materials such as tool steel, cast iron, carbon steel, and aluminum
The point angle is 118 degrees.
TOP 17
KEO #4-1/2 Combined Drill & Countersink - 82 degree Hss RH 82 deg Plain
KEO Cutters
2.50 x 0.40 x 0.40 inches
1.00 pounds
Our Score
Product Features
Cobalt is used to make materials that are more durable and resistant to wear.
In mild steels, high-speed steel provides good wear resistance. Materials with a high iron content
Lubricity is boosted by a tin coating.
TOP 18
KEO 24053#4x5 RH Combined Drill and Countersink
KEO
24053
0.09 pounds
Our Score
Product Features
The Keo Long Series Combined Drill And Countersinks are used to drill and countersink center holes in components or work pieces, with the extra length allowing access to difficult-to-reach areas. Areas to Reach
12 Pieces Per Pack
Origin: United States United States of America
Countersinks and Drills in One
TOP 19
12 Pc. Richard #1 M42-8% Cobalt Combined Drill & Countersinks
Richard Micro Tool, Inc.
1.00 pounds
Our Score
Product Features
Made in the United States of America
TOP 20
KEO #8 Combined Drill & Countersink - 82 degree HSS RH 82 deg Plain
KEO Cutters
3.50 x 0.80 x 0.80 inches
0.50 pounds
Our Score
Product Features
Dimensions of the body: 3/4"
TOP 21
CLEVELAND Combined Drill/Countersink
CLEVELAND
C46273
0.01 pounds
Our Score
Product Features
Uncoated Tools are suitable for a wide range of applications because they only have the base substrate without any additional treatment or coatings.
High- Speed Steel Tools are suitable for a wide range of general-purpose applications, as they combine hardness and toughness to provide excellent wear resistance.
Made in the United States of America
Bell- Drilling and countersinking are two different types of drilling and countersinking.
Appropriate For Alloy- Materials such as tool steel, cast iron, carbon steel, and aluminum
The point angle is 118 degrees.
Top Picks
Most Popular
Related