3M 111/250ML Scotch 111 Adhesion Promoter
2.56 x 2.56 x 5.56 inches
Because surfaces and paint formulations differ so widely, each application should be thoroughly tested.
3M 111 Adhesion Promoter, also known as Ap111, Is An Isopropyl Alcohol-Based Adhesion Promoter. Based Primer Solvent Solution For Better And Faster Adhesion Of 3M Vhb Acrylic Foam Tapes To Various Surfaces, Such As Bare Metals, Galvanized Steel, And Painted Surfaces
The following are some of the features and benefits: Increases the rate of tape adhesion build-up at both normal and cooler temperatures, and has a non-toxic effect. It has an offensive odor, dries quickly, and has a higher bond strength.
Depending on the thickness of the coating, the temperature, and the humidity, drying time is about 1 minute.
If the surface is relatively clean and free of wax, grease, oil, and loose particles, 3M 111 can clean and promote adhesion in a single step. Based on a 2 mil wet coating thickness, the coverage provided is approximately 19 square meters per liter, but this can vary greatly depending on the method of application.